Remove start_screen() and end_screen() from the
Window-port interface.
They were only ever used by tty, and there was a comment
carried to several window-ports about how they "really
should go away. They are tty-specific"
term_start_screen() and term_end_screen() are part of
terminal/NO_TERMS supporting routines now.
sound_verbal(char *text, int32_t gender, int32_t tone, int32_t vol,
int32_t moreinfo);
-- NetHack will call this function when it wants to pass text of
spoken language by a character or creature within the game.
-- text is a transcript of what has been spoken.
-- gender indicates MALE or FEMALE sounding voice.
-- tone indicates the tone of the voice.
-- vol is the volume (1% - 100%) for the sound.
-- moreinfo is used to provide additional information to the soundlib.
-- there may be some accessibility uses for this function.
It may be useful for accessibility purposes too.
A preliminary implementation has been attempted for macsound to test
the interface on macOS. No tinkering of the voices has been done.
Use of the test implementation requires the following at build time with make.
WANT_SPEECH=1
That needs to be included on the make command line to enable the test code,
otherwise just the interface update is compiled in.
I don't know for certain when AVSpeechSynthesizer went into macOS, but older versions
likely don't support it, and would just leave off the WANT_SPEECH=1.
If built with WANT_SPEECH=1, the 'voices' NetHack option needs to be enabled.
It was a bit strange, when I first started up the test, to hear Asidonhopo,
the shopkeeper, talking to me as I entered his shop and interacted with him.
Groundwork for a more versatile interface for using
sound libraries. A lot of sound libraries work across
multiple platforms.
The current NetHack sound stuff is quite limited.
Binaries can have a variety of window ports linked into
them, and it makes sense to have something similar for
sound.
This tries to set things up in a more soundlib-centric way,
rather than inserting things in a platform-centric way.
It establishes a new top-level directory sound (akin to win
for the window interface routines, or "window-port") where
sound-related additions and sndprocs and support files can be
added and used across platforms.
The default interface is nosound and the 'nosound' interface
is in src/sounds.c
The interface for 'windsound', which contains the same minimal
USER_SOUNDS support using built-in routines that has been in the
windows port for a long time is added to
sound/windsound/windsound.c.
For now, the sound interface support for 'qtsound' has been added
to the existing Qt files win/Qt/qt_bind.h and win/Qt/qt_bind.cpp,
and a note has been placed in sound/qtsound/README.md to avoid
confusion.
New header file added: include/sndprocs.h.
Change the inner workings of the experimental TTY_PERM_INVENT.
Switch to delivering the content to tty for the experimental perm_invent
via the existing window port interface (start_menu(), add_menu(), end_menu).
This also adds a new window port interface call ctrl_nhwindow() for
delivering information to the window port, and/or obtaining specific
information from the window port. The information and requests can
be extended as required. To be documented later once the changes settle
down.
Due to the intrusive nature of these changes and the possibility of
some bugs in the new code, I'm going to leave TTY_PERM_INVENT commented
out in the repository for a day or two. Anyone wishing to test it out
can do so by uncommenting TTY_PERM_INVENT in config.h.
One of the drivers of this change was that screen coordinates require a
type that can hold values greater than 127. Parameters to the window
port routines require a large type in order to be able to have values
a fair bit larger than COLNO and ROWNO passed to them, particularly for
their use to the right of the map window.
This splits the uses of xchar into 3 different situations, and adjusts
their type and size:
xchar
|
-----------------------
| | |
coordxy xint16 xint8
coordxy: Actual x or y coordinates for various things (moved to 16-bits).
xint16: Same data size as coordxy, but for non-coordinate use (16-bits).
xint8: There are only a few use cases initially, where it was very
plain to see that the variable could remain as 8-bits, rather
than be bumped to 16-bits. There are probably more such cases
that could be changed after additional review.
Note: This first changed all xchar variables to coordxy. Some were
reviewed and got changed to xint16 or xint8 when it became apparent that
their usage was not for coordinates.
This increments EDITLEVEL in patchlevel.h
(user-side decisions really, but as it stands right now
user-side decisions/options are made and processed by the core)
add a parameter to add_menu so color can be passed
Add a new window-port interface function
perminvent_info *
update_invent_slot(winid window, int slot, perminvent_info *);
That should be nice and flexible and allow exchanges of useful
information between the core and the window port. Information
to be exchange can be easily modified in include/wintype.h as
things evolve.
Information useful to the core can be exchanged from the
window-port in struct to_core.
Information useful from the core to the window-port can be
passed in struct from_core.
I'm not going to update any docs until much later after things
are fully working and settled.
This also doesn't fix or have anything to do with existing
TTY_PERM_INVENT issues.
Move the handling for the Qt interface's splash window into its own
routine to unclutter the constructor for QtBind. Also, don't load
nhsplash.xpm if OPTIONS=!splash has been specified.
Give the window-port side of *_update_inventory() an argument.
Calls in the core still omit that; invent.c's update_inventory()
is the only place that cares.
further adjustments to the window port interface to pass a pointer
to a glyph_info struct which describes not just the glyph number
itself, but also the ttychar, the color, the glyphflags, and the
symset index.
This affects two existing window port calls that get passed glyphs
and does the parameter consistently for both of them using the
glyph_info struct pointer:
print_glyph()
add_menu().
The recently added glyphmod parameter is now unnecessary and has been
removed.
add MALE, FEMALE, and gender-neutral names for individual monster species
to the mons array. The gender-neutral name (NEUTRAL) is mandatory, the
MALE and FEMALE versions are not.
replace code uses of the mname field of permonst with one of the three
potentially-available gender-specific names.
consolidate some separate mons entries that differed only by species into a
single mons entry (caveman, cavewoman and priest,priestess etc.)
consolidate several "* lord" and "* queen/* king" monst entries into
their single species, and allow both genders on some where it makes some
sense (there is probably more work and cleanup to come out of this at some
point, and the chosen gender-neutral name variations are not cast in stone
if someone has better suggestions).
related function or macro additions:
pmname(pm, gender) to get the gender variation of the permonst name. It
guards against monsters that haven't got anything except NEUTRAL naming
and falls back to the NEUTRAL version if FEMALE and MALE versions are
missing.
Ugender to obtain the current hero gender.
Mgender(mtmp) to obtain the gender of a monster
While the code can safely refer directly to pmnames[NEUTRAL] safely in the
code because it always exists, the other two (pmnames[MALE] and
pmnames[FEMALE] may not exist so use:
pmname(ptr, gidx)
where -ptr is a permonst *
-gidx is an index into the pmnames array field of the
permonst struct
pmname() checks for a valid index and checks for null-pointers for
pmnames[MALE] and pmnames[FEMALE], and will fall back to pmnames[NEUTRAL] if
the pointer requested if the requested variation is unavailable, or if the
gidx is out-of-range.
Allow code to specify makemon flags to request female or male (via MM_MALE
and MM_FEMALE flags respectively)to makedefs, since the species alone doesn't
distinguish male/female anymore. Specifying MM_MALE or MM_FEMALE won't
override the pm M2_MALE and M2_FEMALE flags on a mons[] entry.
male and female tiles have been added to win/share/monsters.txt.
The majority are duplicated placeholders except for those that were
separate mons entries before. Perhaps someone will contribute artwork in the
future to make the male and female variations visually distinguishable.
tilemapping via has the MALE tile indexes in the glyph2tile[]
array produced at build time. If a window port has information that the
FEMALE tile is required, it just has to increment the index returned
from the glyph2tile[] array by 1.
statues already preserved gender of the monster through STATUE_FEMALE
and STATUE_MALE, so ensure that pmnames takes that into consideration.
I expect some refinement will be required after broad play-testing puts it to
the test.
consolidate caveman,cavewoman and priest,priestess monst.c entries etc
This commit will require a bump of editlevel in patchlevel.h because it alters
the index numbers of the monsters due to the consolidation of some. Those
index numbers are saved in some other structures, even though the mons[] array
itself is not part of the savefile.
Window Port Interface Change
Also add a parameter to print_glyph to convey additional information beyond
the glyph to the window ports. Every single window port was calling back to
mapglyph for the information anyway, so just included it in the interface and
produce the information right in the display core.
The mapglyph() function uses will be eliminated, although there are still some
in the code yet to be dealt with.
win32, tty, x11, Qt, msdos window ports have all had adjustments done to
utilize the new parameter instead of calling mapglyph, but some of those
window ports have not been thoroughly tested since the changes.
Interface change additional info:
print_glyph(window, x, y, glyph, bkglyph, *glyphmod)
-- Print the glyph at (x,y) on the given window. Glyphs are
integers at the interface, mapped to whatever the window-
port wants (symbol, font, color, attributes, ...there's
a 1-1 map between glyphs and distinct things on the map).
-- bkglyph is a background glyph for potential use by some
graphical or tiled environments to allow the depiction
to fall against a background consistent with the grid
around x,y. If bkglyph is NO_GLYPH, then the parameter
should be ignored (do nothing with it).
-- glyphmod provides extended information about the glyph
that window ports can use to enhance the display in
various ways.
unsigned int glyphmod[NUM_GLYPHMOD]
where:
glyphmod[GM_TTYCHAR] is the text characters associated
with the original NetHack display.
glyphmod[GM_FLAGS] are the special flags that denote
additional information that window
ports can use.
glyphmod[GM_COLOR] is the text character
color associated with the original
NetHack display.
Support for including the glyphmod info in the display glyph buffer
alongside the glyph itself was added and is the default operation.
That can be turned off by defining UNBUFFERED_GLYPHMOD at compile time.
With UNBUFFERED_GLYPHMOD operation, a call will be placed to map_glyphmod()
immediately prior to every print_glyph() call.
Condense the Qt status slightly, moving Alignment field from the
Conditons line to the Characteristics line and the Time and Score
fields from their own possibly blank line to the HP,&c,Gold line.
That's for statuslines:2, which is the default. statuslines:3
restores the previous layout. I tried to make that become the
default for Qt but it got messy fast and I gave up.
I also tried to make changing 'statuslines' back and forth on the
fly work but failed. I left the code in as #if DYNAMIC_STATUSLINES
but that isn't defined anywhere. For the time being at least,
'statuslines' is config file or NETHACKOPTIONS only for Qt, not
changeable via 'O' like for curses and tty.
Change the option description for 'statuslines'. That depended
upon whether curses was compiled in when it should depend on which
interface is active. This moves the alternate info to Guidebook.
Support MSGTYPE=stop by having qt_display_nhwindow(WIN_MESSAGE,TRUE)
issue a tty-style --More-- prompt. For popup_dialog Off, the prompt
gets appended to the most recent message; for popup_dialog On, it is
issued via a popup and not displayed in the message window.
It accepts <space>, ^J, ^M, and ^[ (ESC) to dismiss. There's no way
to dismiss it with the mouse (for !popup_dialog) which might need
some fix....
Several adventures along the way. The '^C-in-parent-terminal triggers
infinite loop repeatedly complaining about "event loop already running"'
is now a one-shot complaint. It isn't fixed but the severity of
having it happen is greatly reduced.
Enhance the "Qt Settings" dialog box to provide control over the
paper doll subset of inventory displayed between the message and
status windows (above the map). A ton of flailing about for a
fairly small but useful change in functionality.
Old dialog (no title):
| [ ] Zoomed -- check box
| "Width:" [ ] -- number entry spinner
| "Height:" [ ] -- ditto
| "Font:" [ ] -- Huge:18pt, Large:14, Medium:12, Small:10, Tiny:8
| [ Dismiss ] -- button
New dialog:
| "Qt NetHack Settings"
|
| "Map:" [ ] "Zoomed" -- check box
| "Tile Width" [ ] -- number entry spinner
| "Tile Height" [ ] -- ditto
| "Invent:" [ ] "Shown" -- check box
| "Doll Width" [ ] -- number entry spinner
| "Doll Height" [ ] -- ditto
| "Font:" [ ] -- Huge:18pt, Large:14, Medium:12, Small:10, Tiny:8
| [ Dismiss ] -- button
The inventory subset can now be suppressed. When shown (the default),
its size can be set independently of the map tiles' size. I've set
the default to be 32x32 tiles instead of 16x16 used for the map.
The settings are saved and restored automatically by Qt, and persist
not just across save/restore cycles but into new games. (That's not
a change, just a reminder.)
Provide a way to communicate additional behaviors and/or appearances
desired from NetHack window port menus.
This is foundation work for changes to follow at a future date.
groundwork only - window port interface change
This changes the last parameter for add_menu() from a boolean
to an unsigned int, to allow additional itemflags in future
beyond just the "preselected" that the original boolean offered.
There shouldn't be any functionality changes with this groundwork-only
change, and if there are it is unintentional and should be reported.
