add MALE, FEMALE, and gender-neutral names for individual monster species
to the mons array. The gender-neutral name (NEUTRAL) is mandatory, the
MALE and FEMALE versions are not.
replace code uses of the mname field of permonst with one of the three
potentially-available gender-specific names.
consolidate some separate mons entries that differed only by species into a
single mons entry (caveman, cavewoman and priest,priestess etc.)
consolidate several "* lord" and "* queen/* king" monst entries into
their single species, and allow both genders on some where it makes some
sense (there is probably more work and cleanup to come out of this at some
point, and the chosen gender-neutral name variations are not cast in stone
if someone has better suggestions).
related function or macro additions:
pmname(pm, gender) to get the gender variation of the permonst name. It
guards against monsters that haven't got anything except NEUTRAL naming
and falls back to the NEUTRAL version if FEMALE and MALE versions are
missing.
Ugender to obtain the current hero gender.
Mgender(mtmp) to obtain the gender of a monster
While the code can safely refer directly to pmnames[NEUTRAL] safely in the
code because it always exists, the other two (pmnames[MALE] and
pmnames[FEMALE] may not exist so use:
pmname(ptr, gidx)
where -ptr is a permonst *
-gidx is an index into the pmnames array field of the
permonst struct
pmname() checks for a valid index and checks for null-pointers for
pmnames[MALE] and pmnames[FEMALE], and will fall back to pmnames[NEUTRAL] if
the pointer requested if the requested variation is unavailable, or if the
gidx is out-of-range.
Allow code to specify makemon flags to request female or male (via MM_MALE
and MM_FEMALE flags respectively)to makedefs, since the species alone doesn't
distinguish male/female anymore. Specifying MM_MALE or MM_FEMALE won't
override the pm M2_MALE and M2_FEMALE flags on a mons[] entry.
male and female tiles have been added to win/share/monsters.txt.
The majority are duplicated placeholders except for those that were
separate mons entries before. Perhaps someone will contribute artwork in the
future to make the male and female variations visually distinguishable.
tilemapping via has the MALE tile indexes in the glyph2tile[]
array produced at build time. If a window port has information that the
FEMALE tile is required, it just has to increment the index returned
from the glyph2tile[] array by 1.
statues already preserved gender of the monster through STATUE_FEMALE
and STATUE_MALE, so ensure that pmnames takes that into consideration.
I expect some refinement will be required after broad play-testing puts it to
the test.
consolidate caveman,cavewoman and priest,priestess monst.c entries etc
This commit will require a bump of editlevel in patchlevel.h because it alters
the index numbers of the monsters due to the consolidation of some. Those
index numbers are saved in some other structures, even though the mons[] array
itself is not part of the savefile.
Window Port Interface Change
Also add a parameter to print_glyph to convey additional information beyond
the glyph to the window ports. Every single window port was calling back to
mapglyph for the information anyway, so just included it in the interface and
produce the information right in the display core.
The mapglyph() function uses will be eliminated, although there are still some
in the code yet to be dealt with.
win32, tty, x11, Qt, msdos window ports have all had adjustments done to
utilize the new parameter instead of calling mapglyph, but some of those
window ports have not been thoroughly tested since the changes.
Interface change additional info:
print_glyph(window, x, y, glyph, bkglyph, *glyphmod)
-- Print the glyph at (x,y) on the given window. Glyphs are
integers at the interface, mapped to whatever the window-
port wants (symbol, font, color, attributes, ...there's
a 1-1 map between glyphs and distinct things on the map).
-- bkglyph is a background glyph for potential use by some
graphical or tiled environments to allow the depiction
to fall against a background consistent with the grid
around x,y. If bkglyph is NO_GLYPH, then the parameter
should be ignored (do nothing with it).
-- glyphmod provides extended information about the glyph
that window ports can use to enhance the display in
various ways.
unsigned int glyphmod[NUM_GLYPHMOD]
where:
glyphmod[GM_TTYCHAR] is the text characters associated
with the original NetHack display.
glyphmod[GM_FLAGS] are the special flags that denote
additional information that window
ports can use.
glyphmod[GM_COLOR] is the text character
color associated with the original
NetHack display.
Support for including the glyphmod info in the display glyph buffer
alongside the glyph itself was added and is the default operation.
That can be turned off by defining UNBUFFERED_GLYPHMOD at compile time.
With UNBUFFERED_GLYPHMOD operation, a call will be placed to map_glyphmod()
immediately prior to every print_glyph() call.
Move the core's global restoring flag (not the same as main()'s
local resuming flag) to a more logical place. Add a saving flag
in the process, but it isn't being set or cleared anywhere yet.
(Once in use it will probably fix the exception during save that
was just reported, but before that it would be useful to figure
out what specifically caused the event.)
The program_state struct really ought to be standalone rather
than part of struct g but I haven't made that change.
Removing an unused variable for wishing and some reformatting
that whent along with it got mixed in. Removes some trailing
whitespace in sfstruct.c too.
Only lightly tested...
I'll push a formatting guide at some point. There may still be
outstanding changes, but please feel free to resolve those as you arrive
a them.
To the best of my knowledge, there is no changes to the actual code
content, but the formatter does have the occasional bug. If you run into
an issue, please fix it!
There is a lot of code affected by this, and Pat Rankin correctly
observes that it would be better to store roguelike as a level flag
rather than just using Is_rogue_level. A note for the future.
- Instead of checking for the Rogue level, check which
graphics are engaged (PRIMARY or ROGUESET) in the
SYMHANDLING() macro.
- track which graphics are active through 'currentgraphics'.
- Instead of symset and roguesymset and symhandling and roguehandling
variables, have symset and symhandling be arrays of two, with the
following indexes:
PRIMARY
ROGUESET
That reduced the amount of repeated code.
(Not to be confused with the 'symset' and 'roguesymset' config file options
both of which still exist)
- the symbol routines were adjusted to pass
the index , rather than 'rogueflag' and coding to roguesymset etc.
Other than fixing bugs that are encountered, this is probably
the last of the symbol stuff, with the exception of
making the symset and roguesymset config file options
accept the keyword value "default".
This is an overhaul to the NetHack drawing mechanism.
- eliminates the need to have separate lists in drawing.c
for the things and their associated explanations by grouping
those thing together on the same inializer in a struct.
- replaces all of these options: IBMgraphics, DECgraphics, MACgraphics,
graphics, monsters, objects, boulder, traps, effects
- drawing.c contains only the set of NetHack standard symbols for
the main game and a set of NetHack standard symbols for the
roguelevel.
- introduces a symbols file that contains named sets of
symbols that can be loaded at run time making it extensible
for situations like multinational code pages like those reported
by <Someone>, without hardcoding additional sets into the game code.
- symbols file uses names for the symbols, so offsets will not break
when new things are introduced into the game, the way the older
config file uchar load routines did.
- symbols file only contains exceptions to the standard NetHack
set, not entire sets so they are much less verbose than all of
the g_FILLER() entries that were previously in drawing.c
- 'symset' and 'roguesymset' config file options for
preselecting a symbol set from the file called 'symbols'
at startup time. The name of the symbols file is not under the
users control, only the symbol set name desired from within the
symbols file is.
- 'symset' config file option loads a desired symbol set for
everything but the rogue level.
- 'roguesymset' config file option loads a desired symbol set
for the rogue level.
- 'SYMBOLS' config file option allows the user to specify replacement
symbols on a per symbol basis. You can specify as many or as few symbols
as you wish. The symbols are identified by a name:value pair, and line
continuation is supported. Multiple symbol assignments can be made on
the same line if each name:value pair is separated by a comma.
For example:
SYMBOLS = S_bars:\xf0, S_tree: \xf1, S_room:\xfa \
S_fountain:\xf4 \
S_boulder:0
- 'symbols' file has the following structure:
start: DECgraphics
Handling: DEC
S_vwall: \xf8 # meta-x, vertical rule
S_hwall: \xf1 # meta-q, horizontal rule
finish
start: IBMgraphics
Handling: IBM
S_vwall: \xb3 # meta-3, vertical rule
S_hwall: \xc4 # meta-D, horizontal rule
finish
- 'symbols' file added to the source tree in the dat directory
- Port Makefiles/scripts will need to be adjusted to move them into
HACKDIR destination
