Requested by k21971 (hardfought admin): classify the gameover event
as something other than achievement so that live-logging can exclude
it in order to use the xlogfile end-of-game entry instead.
It had been classified as an achievement because that was the only
category being treated as 'major' so written to final dumplog. Give
is a new classification 'dump' which is distinct from achievement
and intended to explicitly request that an event go into dumplog.
The gameover event is the only one in that category, at least for now.
Add a bunch of other classifications besides achievement and dump to
be treated as 'major' for dumplog. The new list is
wish, achieve, umonst (death of unique monster), divinegift,
lifesave (via amulet, not explore-/wizard-mode decline to die),
artifact, genocide, dump
and may still need further tuning. Currently excluded are
conduct (first violation of any conduct), killedpet, alignment
(changed, either via helmet or conversion), minorac (minor
achievement such as level gain or entering the mines), and spoiler
(currently only applies to finding Mines' End luckstone which is
also 'achieve' so will be in dumplog).
This doesn't remove the reference to unimplemented LLC_TURNS that is
mentioned in the template sysconf.
Closes#688
Reported by k21971, the dumplog section labeled "major events" showed
all logged events rather than just the ones classified as major.
Filter out the non-major ones when writing dumplog.
At the moment only a couple of ones other than achievements are major.
Probably various other types should be too.
The #chronicle command still lists all logged events unless they're
flagged as 'spoiler'. So far the mines' end luckstone is the only
one flagged that way. Unfortunately a player with access to live
logging could still learn whether or not the gray stone that has just
been picked up on the last mines level is the target luckstone by
viewing the log from outside of the game.
The #chronicle command would be more useful if it gathered all the
categories of events present and put up a menu allowing the player to
choose which ones to view. I haven't attempted to implement that.
Closes#687
Log game events, such as entering a new dungeon level, breaking
a conduct, or killing a unique monster, in a new "Major events"
chronicle. The entries record the turn when the event happened.
The log can be viewed with #chronicle -command, and the entries
also show up in the end-of-game dump, if that is available.
This feature is on by default, but can be disabled by
defining NO_CHRONICLE compile-time option.
This also contains "live logging", writing the events as they
happen into a single livelog-file. This is mostly useful for
public servers. The livelog is off by default, and must be
compiled in with LIVELOG, and then turned on in sysconf.
Mostly this a version of livelogging from the Hardfought server,
with some changes.
The tilemap change provides three variables that used to be
uppercase compile macros in the past, and Amiga (and other ports?) used
them.
The other change just uncomments the header file include.
Move the help text for the 'O' command from the code into its own file
and allow that to be accessed from the '?' menu as well as by choosing
entry '?' in the 'O' menu.
sys/unix/Makefile.top has been updated to handle new 'optmenu', others
need to catch up. The game will still build and run without the file
but asking for options menu help won't work until they do.
Solve the uneven distribution situation that has been present for
picking random rumors for a long time and for random engravings,
epitaphs, and hallucinatory monster names since 3.6.0. This relies
on the previous partial solution where short lines have been padded
to a longer length. When that length is N and random seek lands in
a long line of length L, retry if the position is in the first L-N
characters. Put differently, it if takes more than N characters to
reach the next newline, reject that random seek and try again. This
effectively makes long lines behave as if they had the same length
of N as the short lines have been padded to and when all lines are
the same length, all entries have the same chance to be chosen.
The walls for the mines, gehennom, knox, and sokoban had been
changed at the "tile"-level, with no awareness of the core game,
or non-tile interfaces.
- Expand the glyphs to include a set of walls for the main level
as well as each of those mentioned above.
Altars had been adjusted at the map_glyphinfo() level to substitute
some color variations on-the-fly for unaligned, chaotic, neutral,
lawful altars, and shrines. The tile interface had no awareness of
the feature.
- Expand the glyphs to include each of the altar variations that
had been implemented in the display code for tty-only. This required
the addition of four placeholder tiles in other.txt. Someone with
artistic skill will hopefully alter the additional tiles to better
reflect their intended purpose.
Explosions had unique tiles in the tile window port, and the display
code for tty tinkered with the colors, but the game had very little
awareness of the different types of explosions.
- Expand the glyphs to include each of the explosion types: dark,
noxious, muddy, wet, magical, fiery and frosty.
Pile-markers to represent a pile had been introduced at the
display-level, without little to no awareness by the core game.
- Expand the glyphs to include piletops, including objects,
bodys, and statues.
Recently male and female variations of tiles and monsters had been
had been introduced, but the mechanics had been mostly done at the
display-level through a marker flag. The window port interface then
had to increment the tile mapped to the glyph to get the female version
of the tile.
- Expand the glyphs to include the male and female versions of the
monsters, and their corresponding pet versions, ridden, detected
versions and statues of them.
Direct references to GLYPH_BODY_OFF and GLYPH_STATUE_OFF
in object_from_map() in pager.c were getting incomplete results.
- Add macros glyph_to_body_corpsenm(glyph) and
glyph_to_statue_corpsenm(glyph) macros for obtaining the corpsenm
value after passing the glyph_is_body() or glyph_is_statue() test.
Other relevant notes:
- The tile ordering in the win/share/*.txt tile files has been altered,
other.txt in particular.
- tilemap.c has had a lot of alterations to accommodate the expanded
glyphs. Output that is useful for troubleshooting will end up in
tilemappings.lst if OBTAIN_TILEMAP is defined during build.
It lists all of the glyphs and which tile it gets mapped to, and also
lists each tile and some of the references to it by various glyphs.
- An array glyphmap[MAXGLYPH] is now used. It has an entry for each
glyph, ordered by glyph, and once reset_glyphs(glyph) has been run, it
contains the mapped symindex, default color, glyphflags, and tile
index.
If USE_TILES is defined during build, the tile.c produced from the
tilemap utility populates the tileidx field of each array element with
a glyph-to-tile mapping for the glyph. Later on, when reset_glyphmap()
is run, the other fields of each element will get populated.
- The glyph-to-tile mapping is an added field available to a window
port via the glyphinfo struct passed in the documented interface. The
old glyph2tile[] array is gone. The various active window ports that
had been using glyph2tile[] have been updated to use the new interface
mechanism. Disclaimer: There may be some bug fixing or tidying
required in the window port code.
- reset_glyphmap() is called after config file options parsing
has finished, because some config file settings can impact the results
produced by reset_glyphmap().
- Everything that passes the glyph_is_cmap(glyph) test must
return a valid cmap value from glyph_to_cmap(glyph).
- An 'extern glyph_info glyphmap[MAX_GLYPH];' is inserted into the
top of only the files which need awareness of it, not inserted into
display.h. Presently, the only files that actually need to directly
reference the glyphmap[] array are display.c, o_init.c (for shuffling
the tiles), and the generated tile.c (if USE_TILES is defined).
- Added an MG_MALE glyphflag to complement the MG_FEMALE glyphflag.
- Provide an array for wall colorizations. reset_glyphmap() will draw
the colors from this array: int array wallcolors[sokoban_walls + 1];
The indices of the wallcolors array are main_walls (0), mines_walls
(1), gehennom_walls (2), knox_walls (3), and sokoban_walls (4).
In future, a config file option for adjusting the wall colors and/or
an 'O' option menu to do the same could be added. Right now, the
initializaton of the wallcolors[] array entries in display.c leaves the
walls at CLR_GRAY, matching the defsym color.
- Most of the display-level kludges for some of the on-the-fly
interface features have been removed from map_glyphinfo() as they
aren't needed any longer. These glyph expansions adhere more closely to
the original glyph mechanics of the game.
- Because the glyphs are re-ordered and expanded, an update to
editlevel will be required upon merge of these changes.
This evolves and hopefully eases the game-build requirements by
removing game-compile dependencies on any header files generated
by the makedefs utility, including:
date.h dependency and its inclusion is removed and comparable functionality
is produced at runtime via new file src/date.c.
pm.h dependency and its inclusion is removed and comparable functionality is
produced by moving the monster definitions from monst.c into new header
file called monsters.h and altering them slightly. The former pm.h header
file #define PM_ values are now replaced with appropriate emitted enum
entries during the compiler preprocessing.
onames.h dependency and its inclusion is removed and comparable functionality
is produced by moving the object definitions from objects.c into new header
file called objects.h and altering them slightly. The former onames.h header
file #define values are now replaced with appropriate emitted enum entries
during the compiler preprocessing.
artilist.h has been slightly altered, and the former onames.h artifact-related
header file #define ART_ values are now replaced with appropriate emitted enum
entries during the compiler preprocessing.
makedefs can still produce date.h (makedefs -v), pm.h (makedefs -p), and
onames.h (makedefs -o) for reference purposes. They won't be used during
the compiler.
The other uses for makedefs remain. They are used to prepare external
file content that the game utilizes, not prerequisite code for the
compile:
makedefs -d (database)
makedefs -r (rumors)
makedefs -h (oracles)
makedefs -s (epitaphs, engravings, bogusmons)
date.c
Pull the code for date/time stamping from mdlib.c into date.c.
Set date.o to be dependent on source files, header files, and .o files
so that date.o is rebuilt from date.c when any of those changes, thus
ensuring an accurate date/time stamp. It also includes git sha
functionality formerly done by makedefs writing #define directives
into include/date.h. For unix it passes the git info on
the compile line for date.c (via sys/unix/hints/linux.2020, macOS.2020)
nethack --dumpenums (optional, but on by default)
Allow developer to obtain some internal enum values from NetHack
without having to resort to an external utility such as
makedefs.
Uncomment #define NODUMPENUMS in config.h to disable this.
The updates to sys/windows/Makefile.gcc have not been tested yet.
rename sys/winnt to sys/windows
move vs (visual studio) folder out of win/win32 and into sys/windows
rename include/ntconf.h to include/windconf.h
rename winnt.c to windsys.c
place visual studio projects into individual subfolders.
This will hopefully resolve GitHub issue #484 as well.
OPTIONS=menu_previous_page:\mv
BINDINGS=M-v:menu_previous_page
both worked, but
OPTIONS=menu_previous_page:M-v
BINDINGS=\mv:menu_previous_page
both failed. Make all four variations work. Tiny change made large
by the need to move some things around.
The option definition for menu_first_page had a couple of its flag
bits swapped. I didn't try to figure out whether that had any impact.
Microsoft and other non-GNU compilers don't recognize gcc tricks
like /*NOTREACHED*/ to suppress individual warnings. clang recognizes most
of them because it tries to be gcc-compatible. Because of that, a lot of
potentially useful warnings have had to be completely suppressed in the
past in all source files when using the non-gcc compatible compilers.
Now that the code is C99, take advantage of a way to suppress warnings for
individual functions, a big step up from suppressing the warnings
altogether.
Unfortunately, it does require a bit of ugliness caused by the
insertion of some macros in a few spots, but I'm not aware of
a cleaner alternative that still allows warnings to be enabled
in general, while suppressing a warning for known white-listed
instances.
Prior to the warning-tiggering function, place whichever one of
the following is needed to suppress the warning being encountered:
DISABLE_WARNING_UNREACHABLE_CODE
DISABLE_WARNING_CONDEXPR_IS_CONSTANT
After the warning-triggering function, place this:
RESTORE_WARNINGS
Under the hood, the compiler-appropriate warning-disabling
mechanics involve the use of C99 _Pragma, which can be used
in macros.
For unrecognized or inappropriate compilers, or if
DISABLE_WARNING_PRAGMAS is defined, the macros expand
to nothing.
After the most recent round of moving old stuff to 'outdated',
src/windows.c contained two references to non-existent files.
That broke 'make depend'. Updating it to turn those two into
comments seems risky because someone might add an include for
some new interface later in the file. So comment them out in
the source instead. Also, redo previous 'make depend' update
from about three weeks ago to do the same thing.
The inclusion shouldn't really come before *conf.h because the
things it sets up could depend on those. This is better, but
having Amiga 90% dead and 10% comatose seems to be more trouble
that it's worth.
The gone but still referenced state of amiconf.h broke 'make depend'.
Fixing that turns it into a comment in the generated dependencies
but that ran into a problem with it being followed by fnamesiz.h
instead of being last in the list containing it. So in addition to
the depend fix, move #include "fnamesiz.h" from config.h to global.h
in order to have it come before amiconf.h.
If you set COLNO larger than BUFSZ, few places cause a buffer overrun.
Add a new buffer size definition, COLBUFSZ, which is the larger of
COLNO and BUFSZ, used in places that care about a screen-wide string.
roll parts of pr385 into source tree
This does not take the PR as is.
Unlike the PR, this streamlines and minimizes the integration somewhat:
- use hints/include mechanism instead of creating alternative
Makefile.dat, Makefile.src, Makefile.top, Makefile.utl in sys/lib;
those would have been a maintenance nightmare.
- don't have alternative mkmkfile.sh and setup.sh in sys/lib.
- sys/lib/libnethackmain.c differed from sys/unix/unixmain.c by
very little, so just place a small bit of conditional code at the
top of sys/unix/unixmain.c instead.
- changed the conditional code bits from __EMSCRIPTEN__ to
CROSS_TO_WASM.
- You should be able to build the wasm result by:
cd sys/unix ; sh setup.sh hints/linux.2020 ; cd ../..
make fetch-lua (<-one time)
make WANT_LIBNH all
- You should be able to build LIBNBH by:
cd sys/unix ; sh setup.sh hints/linux.2020 ; cd ../..
make fetch-lua (<-one time)
make CROSS_TO_WASM=1 all
As it is currently coded, winshim.c requires C99.
Disclaimer: This is a minimal recipe, just to get someone else
started if they have a desire to get a full cross-compile of
NetHack-3.7 going for the Amiga. Some NetHack code bitrot was
corrected, and it does seem able to compile the game itself
to a point. See caveats below.
- If you want to obtain the cross-compiler and tools/libs for Amiga
https://github.com/bebbo/amiga-gcc
To our knowledge, a pre-built copy isn't available, so you have to
obtain the source via git and build it on your system.
The build prerequisite packages for Ubuntu are easily obtained:
sudo apt install make wget git gcc g++ lhasa libgmp-dev \
libmpfr-dev libmpc-dev flex bison gettext texinfo ncurses-dev \
autoconf rsync
The build prerequisite packages for macOS are apparently easily
obtained via homebrew, but that was not tested:
brew install bash wget make lhasa gmp mpfr libmpc flex gettext \
texinfo gcc make autoconf
After installing the prerequite packages and the cross-compiler
it was a straightforward build:
git clone https://github.com/bebbo/amiga-gcc.git
cd amiga-gcc
make update
[Note that you may have to take ownership of the files in the
bebbo repo via chown before succesfully carrying out the next
steps]
make clean
make clean-prefix
date; make all -j3 >&b.log; date
The compiler pieces are installed in /opt/amiga by default which
was satisfactory for our initial attempt, but if you want you can
alter the prefix before you build if you want. That is all
spelled out on the page at: https://github.com/bebbo/amiga-gcc
The Amiga cross-compile can then be carried out by specifying
CROSS_TO_AMIGA=1 on the make command line.
For example:
make CROSS_TO_AMIGA=1 all
make CROSS_TO_AMIGA=1 package
You can explicitly include tty and curses support if desired, otherwise
you'll end up with a tty-only cross-compile build. The SDL1 pdcurses
support has not been tested.
make WANT_WIN_TTY=1 WANT_WIN_CURSES=1 CROSS_TO_AMIGA=1 all
Also note that building the amiga targets using the make command
above, does not preclude you from building local linux or macOS
targets as well. Just drop the CROSS_TO_AMIGA=1 from the make
command line.
The cross-compiler hints additions are enclosed inside ifdef sections
and won't interfere with the non-cross-compile build in that case.
CAVEATS: The original NetHack Amiga build steps included the source for
some utilities that were built and executed on the amiga: txt2iff and
xpm2iff as part of the NetHack build procedure on amiga. Those did not
compile out-of-the-box on the linux host. They will either have to be:
- ported to build and run on the linux or macOS cross-compile host
or
- their functionality will have to be rolled into amiga NetHack
itself and executed on the target Amiga the first time the game
is run, perhaps.
Good luck amiga aficionados, perhaps you'll be able to take this
initial effort forward and get NetHack-3.7 available on the amiga or
amiga-emulator. Let us know if you do, and we can roll changes in
if you provide them.
Expand the use of the sys/unix Makefiles to be used for both normal
local builds and installs, as well as cross-compiles for other
platforms/targets.
Up until now, the primary unix Makefiles have treated util/host-side
component compiles, links and target object files just the same as
the game component compiles, links, and target object files.
Unfortunately, that meant that cross-compile effort typically had
to re-invent Makefiles specific to the cross-compile, creating a
maintenance burden and deviation from the typical local unix build
and providing a daunting obstacle to those that want to establish
build for a target environment/platform.
This change distinguishes between util/host-side component builds,
links, and component builds and targets object files destined for
the game (and other target platforms) in the Makefiles.
In theory, this will ease the effort for people that want to try to
resurrect NetHack perhaps on an old platform where it is no longer
viable to build NetHack-3.7 on the platform itself using old, outdated
compile tools, possibly with an old, outdated C dialect.
Some details:
- Game-related targets in the Makefiles (as opposed to util/host-side
targets that will be executed on the host), which could be destined
for another platform in a cross-compile scenario are prefixed with
$(TARGETPFX) so that they are distinguished.
The default scenario where no cross-compiler is involved, is to
define TARGETPFX to nothing, and therefore meant to have no effect.
- Game-related compile and link commands in the Makefiles and their
associated command line flags are distinguished from util/host-side
compile and link commands in the Makefiles by using $(TARGET_CC),
$(TARGET_CFLAGS), $(TARGET_LINK), $(TARGET_LFLAGS), $(TARGET_CXX),
$(TARGET_CXXFLAGS), $(TARGET_LIBS).
Those are used in the Makefile in place of $(CC), $(CFLAGS), $(LINK),
$(LFLAGS), $(CXX), $(CXXFLAGS), $(LIBS).
The default scenario where no cross-compiler is involved, defines
the TARGET_ version of those Makefile variables to match their
typical non-TARGET_ ounterparts.
- The dependency lists in the Makefiles includes the $(TARGETPFX)
prefix for stuff that would potentially be produced from a
cross-compile build.
- It adds pregame targets and $(PREGAME) variable, so that hints files
can add some additional stuff if required for a cross-compile
scenario.
The default scenario where no cross-compiler is involved doesn't
do anything for $(PREGAME).
- It adds $(BUILDMORE) target and variable, so that hints files
can add some additional things to be built for a cross-compile
scenario.
- It adds a "package" target and $(PACKAGE) variable, so that hints files
can add steps for the target platform in a cross-compile
scenario.
The "install" target assumes local build and placement and
isn't really applicable to a cross-compile scenario where the results
really just need to be bundled up for transport to the target platform.
- Also, this adds a pair of include files that can be updated with some
cross-compile recipes as they evolve. They are named "cross-pre.2020"
(for stuff to be included in the PRE section) and "cross-post.2020"
for stuff to be included in the POST section via sys/unix/setup.sh.
Those are included in sys/unix/hints/linux.2020 and
sys/unix/hints/macOS.2020 hints files.
|alloc.c:159:1: warning: no previous prototype for function 'dupstr'
after adding -Wmissing-prototypes to my CFLAGS (plus MONITOR_HEAP
defined in config.h).
I don't why I never noticed this before. It wasn't triggered by any
recent changes.
combine boolean and compound options into a single allopt[] array for
processing in options.c.
move the definitions of the options into new include/optlist.h file which
uses a set of macros to define them appropriately.
during compile of options.c each option described in include/optlist.h:
1. automatically results in a function prototype for an optfn called
optfn_xxxx (xxxx is the option name).
2. automatically results in an opt_xxxx enum value for referencing
its index throughout options.c (xxxx is the option name).
3. is used to initialize an element of the allopt[] array at index
opt_xxxx (xxxx is the option name) based on the settings in the
NHOPTB, NHOPTC, NHOPTP macros. Those macros only live during the
compilation of include/optlist.h.
each optfn_xxxx() function can be called with a req id of: do_init, do_set,
get_val or do_handler.
req do_init is called from options_init, and if initialization or memory
allocation or other initialization for that particular option is needed,
it can be done in response to the init req.
req do_set is called from parseoptions() for each option it encounters
and the optfn_xxxx() function is expected to react and set the option
based on the string values that parseoptions() passes to it.
req get_val expects each optfn_xxxx() function to write the current
option value into the buffer it is passed.
req do_handler is called during doset() operations in response to player
selections most likely from the 'O' option-setting menu, but only if the
option is identified as having do_handler support in the allopts[]
'has_handler' boolean flag. Not every optfn_xxxx() does.
function special_handling() is eliminated. It's code has been redistributed
to individual handler functions for the option or purpose that they serve.
moved reglyph_darkroom() function from options.c to display.c
teleds() is used for more than just teleportations, the teleportation message
was also given when mounting a steed.
Trying out a new bit flags method parameter design pattern.
Move option variable goldX (True: treat gold as BUC unknown, False:
treat gold as uncursed during BUCX filtering) from iflags to flags
so that it persists across save/restore.
Get rid of a few obsolete things from struct flags.
Try to make the 'cursesgraphics' option work although I don't think
that it was ever functional enough for anybody to use so probably
could have been removed instead.
Bump EDITLEVEL; any current save files are invalid.
Demote status from Beta to Work-in-Progress.
I modified src/sfdata.c manually (not included here) to get a full
build. The Unix Makefile.src needs to be taught when and how to
regenerate it.
Some support of new code #defines to faciliate cross-compiling:
OPTIONS_AT_RUNTIME If this is defined, code to support obtaining
the compile time options and features is
included. If you define this, you'll also have
to compile sys/mdlib.c and link the resulting
object file into your game binary/executable.
CROSSCOMPILE Flags that this is a cross-compiled NetHack build,
where there are two stages:
1. makedefs and some other utilities are compiled
on the host platform and executed there to generate
some output files and header files needed by the
game.
2. the NetHack game files are compiled by a
cross-compiler to generate binary/executables for
a different platform than the one the build is
being run on. The executables produced for the
target platform may not be able to execute on the
build platform, except perhaps via a software
emulator.
The 2-stage process (1. host, 2.target) can be done
on the same platform to test the cross-compile
process. In that case, the host and target platforms
would be the same.
CROSSCOMPILE_HOST Separates/identifies code paths that should only be
be included in the compile on the host side, for
utilities that will be run on the host as part of
stage 1 to produce output files needed to build the
game. Examples are the code for makedefs, tile
conversion utilities, uudecode, dlb, etc.
CROSSCOMPILE_TARGET Separates/identifies code paths that should be
included on the build for the target platform
during stage 2, the cross-compiler stage. That
includes most of the pieces of the game itself
but the code is only flagged as such if it must
not execute on the host.
If you don't define any of those, things should build as before.
One follow-on change that is likely required is setting the new dependency
makedefs has on src/mdlib.c in Makefiles etc.
More information about the changes:
makedefs
- splinter off some of makedefs functionality into a separate file
called src/mdlib.c.
- src/mdlib.c, while included during the compile of makedefs.c
for producing the makedefs utility, can also be compiled
as a stand-alone object file for inclusion in the link step
of your NetHack game build. The src/mdlib.c code can then
deliver the same functionality that it provided to makedefs
right to your NetHack game code at run-time.
For example, do_runtime_info() will provide the caller with
the features and options that were built into the game.
Previously, that information was produced at build time on the
host and stored in a dat file. Under a cross-compile situation,
those values are highly suspect and might not even reflect the
correct options and setting for the cross-compiled target
platform's binary/executable. The compile of those values and
the functionality to obtain them needs to move to the target
cross-compiler stage of the build (stage 2).
- date information on the target-side binary is produced from
the cross-compiler preprocessor pre-defined macros __DATE__
and __TIME__, as they reflect the actual compile time of the
cross-compiled target and not host-side execution of a utility
to produce them. The cross-compiler itself, through those
pre-defined preprocessor macros, provides them to the target
platform binary/executable. They reflect the actual build
time of the target binary/executable (not values produced
at the time the makefiles utility was built and the
appropriate option selected to store them in a text file.)
- most Makefiles should not require adding the new file
src/mdlib.c because util/makedefs.c has a preprocessor
include "../src/mdlib.c" to draw in its contents. As previously
stated though, the Makefile dependency may be required:
makedefs.o: ../util/makedefs.c ../src/mdlib.c
^^^^^^^^^^^^^^^
With 3.7+ aspirations of improving savefile interoperability between 32-bit
and 64-bit builds, as well as between platforms, it is better to not have
the underlying struct/array content be conditional.
This splits off some of the MAIL code into MAIL_STRUCTURES code. In theory,
since MAIL_STRUCTURES is unconditionally included, the macro could
just go away and leave that code unconditional, but this commit doesn't
go that far.
Game is playable, and should compile on linux and Windows.
Assumes you have a lua 5.3 library available.
Removes level compiler and associated files.
Replaces special level des-files with lua scripts.
Exposes some NetHack internals to lua:
- des-table with commands to create special levels
- nh-table with NetHack core commands
- nhc-table with some constants
- u-table with some player-specific data (u-struct)
- selection userdata
Adds some rudimentary tests.
Adds new extended command #wizloadlua to run a specific script,
and #wizloaddes to run a specific level-creation script.
nhlib.lua is loaded for every lua script.
Download and untar lua:
mkdir lib
cd lib
curl -R -O http://www.lua.org/ftp/lua-5.3.5.tar.gz
tar zxf lua-5.3.5.tar.gz
Then make nethack normally.
make typedef of boolean match mingw header files
link with shell32 and ole32 as Makefile.msc now had to do
kludge some stuff missing from mingw headers in sys/winnt/windmain.c
