It was too early to call the windowport change_color() routine
while processing the config file. The windowport was not yet
fully operational.
Now the palette option processing will just place the rgb
value into the appropriate ga.altpalette[CLR_MAX] entry.
init_sound_disp_gamewindows(void) [allmain.c] calls
change_palette() [coloratt.c] and it will call the windowport
change_color() function for each ga.altpalette[] entry that
has been set.
Notes:
The rgb values stored in ga.altpalette[] have the NH_ALTPALETTE bit set
so that the rgb value of 0 can be stored and be distinguishable from
a "not set" entry.
The NH_ALTPALETTE bit is cleared from the rgb value in change_palette()
prior to calling the windowport change_color() function.
The syntax for palette is colorname/r-g-b.
For example: palette:black/12-12-12
colorname must be one of the NH_BASIC_COLOR names or a suitable
alias for one of those 16 entries.
Some of the windowport CHANGE_COLOR functions had the wrong parameters,
perhaps due to bitrot. Those have been corrected to match the prototype.
Change the inner workings of the experimental TTY_PERM_INVENT.
Switch to delivering the content to tty for the experimental perm_invent
via the existing window port interface (start_menu(), add_menu(), end_menu).
This also adds a new window port interface call ctrl_nhwindow() for
delivering information to the window port, and/or obtaining specific
information from the window port. The information and requests can
be extended as required. To be documented later once the changes settle
down.
Due to the intrusive nature of these changes and the possibility of
some bugs in the new code, I'm going to leave TTY_PERM_INVENT commented
out in the repository for a day or two. Anyone wishing to test it out
can do so by uncommenting TTY_PERM_INVENT in config.h.
One of the drivers of this change was that screen coordinates require a
type that can hold values greater than 127. Parameters to the window
port routines require a large type in order to be able to have values
a fair bit larger than COLNO and ROWNO passed to them, particularly for
their use to the right of the map window.
This splits the uses of xchar into 3 different situations, and adjusts
their type and size:
xchar
|
-----------------------
| | |
coordxy xint16 xint8
coordxy: Actual x or y coordinates for various things (moved to 16-bits).
xint16: Same data size as coordxy, but for non-coordinate use (16-bits).
xint8: There are only a few use cases initially, where it was very
plain to see that the variable could remain as 8-bits, rather
than be bumped to 16-bits. There are probably more such cases
that could be changed after additional review.
Note: This first changed all xchar variables to coordxy. Some were
reviewed and got changed to xint16 or xint8 when it became apparent that
their usage was not for coordinates.
This increments EDITLEVEL in patchlevel.h
(user-side decisions really, but as it stands right now
user-side decisions/options are made and processed by the core)
add a parameter to add_menu so color can be passed
Add a new window-port interface function
perminvent_info *
update_invent_slot(winid window, int slot, perminvent_info *);
That should be nice and flexible and allow exchanges of useful
information between the core and the window port. Information
to be exchange can be easily modified in include/wintype.h as
things evolve.
Information useful to the core can be exchanged from the
window-port in struct to_core.
Information useful from the core to the window-port can be
passed in struct from_core.
I'm not going to update any docs until much later after things
are fully working and settled.
This also doesn't fix or have anything to do with existing
TTY_PERM_INVENT issues.
Give the window-port side of *_update_inventory() an argument.
Calls in the core still omit that; invent.c's update_inventory()
is the only place that cares.
further adjustments to the window port interface to pass a pointer
to a glyph_info struct which describes not just the glyph number
itself, but also the ttychar, the color, the glyphflags, and the
symset index.
This affects two existing window port calls that get passed glyphs
and does the parameter consistently for both of them using the
glyph_info struct pointer:
print_glyph()
add_menu().
The recently added glyphmod parameter is now unnecessary and has been
removed.
add MALE, FEMALE, and gender-neutral names for individual monster species
to the mons array. The gender-neutral name (NEUTRAL) is mandatory, the
MALE and FEMALE versions are not.
replace code uses of the mname field of permonst with one of the three
potentially-available gender-specific names.
consolidate some separate mons entries that differed only by species into a
single mons entry (caveman, cavewoman and priest,priestess etc.)
consolidate several "* lord" and "* queen/* king" monst entries into
their single species, and allow both genders on some where it makes some
sense (there is probably more work and cleanup to come out of this at some
point, and the chosen gender-neutral name variations are not cast in stone
if someone has better suggestions).
related function or macro additions:
pmname(pm, gender) to get the gender variation of the permonst name. It
guards against monsters that haven't got anything except NEUTRAL naming
and falls back to the NEUTRAL version if FEMALE and MALE versions are
missing.
Ugender to obtain the current hero gender.
Mgender(mtmp) to obtain the gender of a monster
While the code can safely refer directly to pmnames[NEUTRAL] safely in the
code because it always exists, the other two (pmnames[MALE] and
pmnames[FEMALE] may not exist so use:
pmname(ptr, gidx)
where -ptr is a permonst *
-gidx is an index into the pmnames array field of the
permonst struct
pmname() checks for a valid index and checks for null-pointers for
pmnames[MALE] and pmnames[FEMALE], and will fall back to pmnames[NEUTRAL] if
the pointer requested if the requested variation is unavailable, or if the
gidx is out-of-range.
Allow code to specify makemon flags to request female or male (via MM_MALE
and MM_FEMALE flags respectively)to makedefs, since the species alone doesn't
distinguish male/female anymore. Specifying MM_MALE or MM_FEMALE won't
override the pm M2_MALE and M2_FEMALE flags on a mons[] entry.
male and female tiles have been added to win/share/monsters.txt.
The majority are duplicated placeholders except for those that were
separate mons entries before. Perhaps someone will contribute artwork in the
future to make the male and female variations visually distinguishable.
tilemapping via has the MALE tile indexes in the glyph2tile[]
array produced at build time. If a window port has information that the
FEMALE tile is required, it just has to increment the index returned
from the glyph2tile[] array by 1.
statues already preserved gender of the monster through STATUE_FEMALE
and STATUE_MALE, so ensure that pmnames takes that into consideration.
I expect some refinement will be required after broad play-testing puts it to
the test.
consolidate caveman,cavewoman and priest,priestess monst.c entries etc
This commit will require a bump of editlevel in patchlevel.h because it alters
the index numbers of the monsters due to the consolidation of some. Those
index numbers are saved in some other structures, even though the mons[] array
itself is not part of the savefile.
Window Port Interface Change
Also add a parameter to print_glyph to convey additional information beyond
the glyph to the window ports. Every single window port was calling back to
mapglyph for the information anyway, so just included it in the interface and
produce the information right in the display core.
The mapglyph() function uses will be eliminated, although there are still some
in the code yet to be dealt with.
win32, tty, x11, Qt, msdos window ports have all had adjustments done to
utilize the new parameter instead of calling mapglyph, but some of those
window ports have not been thoroughly tested since the changes.
Interface change additional info:
print_glyph(window, x, y, glyph, bkglyph, *glyphmod)
-- Print the glyph at (x,y) on the given window. Glyphs are
integers at the interface, mapped to whatever the window-
port wants (symbol, font, color, attributes, ...there's
a 1-1 map between glyphs and distinct things on the map).
-- bkglyph is a background glyph for potential use by some
graphical or tiled environments to allow the depiction
to fall against a background consistent with the grid
around x,y. If bkglyph is NO_GLYPH, then the parameter
should be ignored (do nothing with it).
-- glyphmod provides extended information about the glyph
that window ports can use to enhance the display in
various ways.
unsigned int glyphmod[NUM_GLYPHMOD]
where:
glyphmod[GM_TTYCHAR] is the text characters associated
with the original NetHack display.
glyphmod[GM_FLAGS] are the special flags that denote
additional information that window
ports can use.
glyphmod[GM_COLOR] is the text character
color associated with the original
NetHack display.
Support for including the glyphmod info in the display glyph buffer
alongside the glyph itself was added and is the default operation.
That can be turned off by defining UNBUFFERED_GLYPHMOD at compile time.
With UNBUFFERED_GLYPHMOD operation, a call will be placed to map_glyphmod()
immediately prior to every print_glyph() call.
Provide a way to communicate additional behaviors and/or appearances
desired from NetHack window port menus.
This is foundation work for changes to follow at a future date.
groundwork only - window port interface change
This changes the last parameter for add_menu() from a boolean
to an unsigned int, to allow additional itemflags in future
beyond just the "preselected" that the original boolean offered.
There shouldn't be any functionality changes with this groundwork-only
change, and if there are it is unintentional and should be reported.
Defined strbuf_t and related routines to support dynamically sized
strings. Modified strip_newline() to strip the last newline in a string
instead of the first.
Simplified splash window code using new strbuf_t.
Prior to exiting game, re-enable getreturn and call wait_synch() in
case there is buffered raw prints that must be displayed to user.
Changes to be committed:
modified: Files
deleted: sys/winnt/Makefile.bcc
modified: sys/winnt/Makefile.gcc
modified: win/win32/winMS.h
Since borland Makefile isn't operational, remove it for
this release as recommended.
Changes to install.nt pending.
Changes to be committed:
modified: doc/window.doc
modified: include/qt_win.h
modified: include/trampoli.h
modified: include/winX.h
modified: include/wingem.h
modified: include/winprocs.h
modified: include/wintty.h
modified: src/display.c
modified: src/windows.c
modified: sys/amiga/winami.p
modified: sys/amiga/winfuncs.c
modified: sys/amiga/winproto.h
modified: sys/wince/mswproc.c
modified: sys/wince/winMS.h
modified: win/Qt/qt_win.cpp
modified: win/X11/winmap.c
modified: win/chain/wc_chainin.c
modified: win/chain/wc_chainout.c
modified: win/chain/wc_trace.c
modified: win/gem/wingem.c
modified: win/gem/wingem1.c
modified: win/gnome/gnbind.c
modified: win/tty/wintty.c
modified: win/win32/mswproc.c
modified: win/win32/winMS.h
print_glyph now takes a second parameter.
Tiles on tiled ports always looked odd on places like the plane of air
where the background color of the tile didn't match the general background
of the surrounding area.
3.6 made that even worse and more glaringly noticeable with the introduction
of darkened room tiles.
The code to actually send something useful through the new parameter
for window ports to take advantage if they want will follow.
I did my best to exempt some of the bigger aligned blocks from the reformatting
using the /* clang-format off */ and /* clang-format on */ tags. Probably some
that shouldn't have been formatted were anyway; if you encounter them, please
fix.
The clang-format tags were left in on the basis that it's much easier to prune
those out later than to put them back in, and it means that, modulo my custom
version of clang-format, I should be able to run clang-format on the source tree
again without changing anything, now that Pat has fixed the VA_DECL issues.
Part II of the bones tracking patch. Change umpteen different outrip()
routines to handle its new time_t argument, and use formatkiller() instead
of directly accessing killer.{format,name} and killed_by_prefix[]. The
latter is now static within formatkiller().
The many sys/* and win/* changes are untested....
[Third of three message history patches.]
Add another argument to putmsghistory() so that it can tell whether
it's processing multiple messages for restore (which should be treated as
being older than any current messages) or a single message to stuff into
history (which should be treated as the most recent message even though
it hasn't been displayed in the message window).
On Mon, 03 Jan 2005 12:04:29 +0000, <email deleted> wrote:
> Dear NetHack win32 developers,
>
> This bug does not affect the win32 binaries that you distribute but it
> does affect NetHack 3.4.3 if I build it from source. The difference may
> be due to different compilers or whatever. I'm using mingw32-gcc v3.2
>
> I don't quite understand what's going on (I never was much good at
> win32 programming), but it appears that the WM_KEYDOWN message for
> AltGr-4 is being translated into a WM_CHAR message with a wParam of
> 128. I don't understand why that should be, but anyway. The problem
> then occurs when NetHack casts wParam to char which, since char is
> signed, gives -128. onListChar() then passes -128 to isdigit() which
> causes the crash. The fix appears to be to simply drop the cast:
Also
> <email deleted>
> Newsgroups: rec.games.roguelike.nethack
> Subject: Changing tile set for item list?
> Date: 1 Jan 2005 20:03:08 -0800
> <email deleted>
>
> I'm using the windows interface for Nethack 3.4, and I've successfully
> changed the tileset used by changing defaults.nh. The only problem is,
> the item list (i.e. The list that comes up when I press "i") still uses
> the old tiles. Is there any way to change the list so it uses the new
> tiles? I've searched the guidebook to no avail. I'm debating if it is
> even possible.
>
> Thanks for the help,
> -Zmann
trunk patch:
- menu: display custom tiles if map is not ASCII
- menu: display '-'/'+'/'#' in place of a tile if map is ASCII
- fix isdigit() crash on AltGr-4 with mingw
It looks kinda weird with huge tiles (e.g. absurd96) but that could
be just me. Comments/suggestions are welcome.
-<Someone>
What's in it:
some MessageBox tidbits:
- Let all MessageBoxes display an icon
- Introduced NHMessageBox to have messageboxes display a consistent title
- Change icon in mswin_display_file from MB_ICONERROR to MB_ICONEXCLAMATION
for non-fatal error
And to solve #U355: NetHackW won't run on Win2K OS:
- Avoid a crash when closing the main window while the splash screen is
displayed.
- Make sure NetHack starts normal when closed minimized
- Center the splash screen on the screen, not on the parent window
(which may be off-screen)
What's new in it:
- Show copyright banner in textbox in splash screen instead of over the picture
- Show news in splash screen only if iflags.news (solves W341-6)
- show complete version information in splash screen when it is used as about box)
[Also reverse the numkey patch in main trunk]
- My "various Windows refinements" patch from yesterday went into 3.4.x correctly
- My "NumberPad" patch went into 3.4.x, but should be backed out
- My "various Windows refinements" patch from last week was for 3.5.0, but is incomplete; you can safely ignore that.
- I'll make a new "various Windows refinements" patch for 3.5.0 tonight.
(2 troublesome bands removed
and will follow later)
Here's the new patch with the Windows improvements; this should apply to the
3.4.2 tree. Note the changed filename in the diff lines.
What's in it:
> some MessageBox tidbits:
> - Let all MessageBoxes display an icon
> - Introduced NHMessageBox to have messageboxes display a consistent title
> - Change icon in mswin_display_file from MB_ICONERROR to MB_ICONEXCLAMATION
> for non-fatal error
>
> And to solve #U355: NetHackW won't run on Win2K OS:
> - Avoid a crash when closing the main window while the splash screen is
> displayed.
> - Make sure NetHack starts normal when closed minimized
> - Center the splash screen on the screen, not on the parent window (which may
> be off-screen)
What's new in it:
- Show copyright banner in textbox in splash screen instead of over the picture
- Show news in splash screen only if iflags.news (solves W341-6)
- show complete version information in splash screen when it is used as about
box
