Update tty command completion to ignore #shell and #suspend when
they're disabled. (Since they aren't flagged for command completion,
this should be unnoticeable.)
Update X11 extended command selection to not show shell and suspend
in the menu when they're disabled. (Trickier than I expected.)
X11 currently rejects #suspend (at run time, not compile time) but
allows #shell. If it was launched syncronously from a terminal
window, shell escape behaves sanely. Otherwise, that seems like
asking for trouble.
When a getlin() response is being typed, it wraps to second line if
the cursor tries to go past COLNO-1, but if a previous response is
treated as part of the prompt, using pline() to write prompt+space+text
wraps at a whole word boundary. tty's getlin() assumes that the screen
position can be derived from that prompt+space+text_so_far but that
doesn't match if wrapping at a word boundary leaves blank space at end
of the top line.
When a prompt is accompanied by default answer, output the answer
separately instead of pretending it is part of the prompt. Line-wrap
should occur at same point as when it was originally typed and avoid
the confusion about how far to back up when deleting characters.
This hasn't been exhaustively tested but it seems to work correctly
for ordinary input, input erased one character at a time, and input
killed all at once. One thing which definitely hasn't been tested is
having the prompt itself be so long that it needs to wrap.
After about the third time typing '#' and getting a prompt of "# K", I
decided that it wasn't clumsy typing. The call chain for get_ext_cmd()
was passing an uninitialized output buffer to [hooked_tty_]getlin()
which treated random junk as the previous result to be used as current
default. Other interfaces may need a similar fix.
Before this change, more-prompts and input text -prompts could not
be accepted with carriage return. Now, just like in menus, carriage
return is treated the same as a newline.
To test, use 'stty -icrnl'
I couldn't reproduce the reported problem of the "In what direction?"
being issued after the screen was cleared, but bypassing pline() in
favor of putstr(WIN_MESSAGE) for tty prompts did also bypass
if (vision_full_recalc) vision_recalc(0);
if (u.ux) flush_screen(1);
done in pline(). Inadvertent loss of the latter could conceivably be
responsible for the problem. If so, the escape code used by cl_end()
may be broken for somebody's termcap or terminfo setup since clearing
to the end of the line in the message window shouldn't erase the rest
of the screen.
Regardless, the prompting change also bypassed the ability to show
the prompt with raw_printf() if the display wasn't fully intialized
yet, so some change to the revised prompting was necessary anyway.
Switching back from putstr(WIN_MESSAGE) to pline() resulted in
duplicated entries in DUMPLOG message history, one with bare prompt
followed by another with response appended, so more tweaking was
needed. The result is use of new custompline() instead of normal
pline(). custompline() accepts some message handling flags to give
more control over pline()'s behavior. It's a more general variation
of Norep() but its caller needs to specify an extra argument.
Update DUMPLOG's message history to include player responses to
most queries. For tty, both getlin() and yn_function(). For other
interfaces, only yn_function() is covered. (It's intercepted by a
core routine that can take care of the logging; getlin() isn't.)
Also includes saved messages from previous session(s), for the
interfaces which support that (tty), to fill out the logging when
a game ends shortly after a save/restore cycle.
The tty interface was using pline() to display prompt strings.
Having 'MSGTYPE=hide "#"' or 'MSGTYPE=hide "yn"' in .nethackrc
would suppress many prompt strings (in the two examples mentioned,
entering extended commands or the vast majority of yes/no questions,
respectively) and generally lead to substantial confusion even if
done intentionally, so switch to putstr(WIN_MESSAGE) instead.
This is a modified version of Jason Dorje Short's key rebinding
patch, and allows also binding special keys, such as the ones
used in getloc and getpos.
One of the ways to play NetHack on nethack.alt.org is via a HTML
terminal in browser. Unfortunately this means several ctrl-key
combinations cannot be entered, because the browser intercepts
those. Similar thing applies to some international keyboard layouts
on Windows. With this patch, the user can just rebind the command
to a key that works best for them.
I've tested this on Linux TTY, X11, and Windows TTY and GUI.
I'll push a formatting guide at some point. There may still be
outstanding changes, but please feel free to resolve those as you arrive
a them.
To the best of my knowledge, there is no changes to the actual code
content, but the formatter does have the occasional bug. If you run into
an issue, please fix it!
On NAO, one of the major complaints was accidental escaping
from wishing prompt when using cursor keys. The users were
trying to go "back" on the entry to fix a typo, but lost
the wish instead.
This prevents escaping out of a text prompt if there is any
text entered into the prompt; pressing escape clears the prompt.
This reverts commit 7f0f43e6f9 and some related
subsequent commits.
This compiles, but I have not done extensive testing.
Conflicts:
include/config.h
include/decl.h
include/extern.h
include/global.h
include/tradstdc.h
include/wintty.h
src/drawing.c
src/files.c
src/hacklib.c
src/mapglyph.c
src/options.c
sys/winnt/nttty.c
win/tty/getline.c
win/tty/topl.c
win/tty/wintty.c
The presence of conditional code for both UNICODE_WIDEWINPORT and
NEWAUTOCOMP in hooked_tty_getlin() was making it be pretty hard to read.
This simplifies the UNICODE_WIDEWINPORT parts similar to what was done in
topl.c a year or two back. The NEWAUTOCOMP parts are still cluttered.
This compiles successfully with UNICODE_WIDEWINPORT enabled but that
configuration is otherwise untested.
The hangup check added to xwaitforspace() (which gets tty user's
response to --More-- and "Press Return to continue: ") wouldn't be good
enough if hangup occurred while that routine's input loop was executing.
NOSAVEONHANGUP isn't documented anywhere. I don't see why it should
wipe out recoverable level files just because it doesn't want to build a
save file out of them during the hangup. Leave them intact if checkpoint
is active. If someone really wants to make them always go away, they'll
need to disable INSURANCE as well as enable NOSAVEONHANGUP.
tty's getret() -> xwaitforspace() could get stuck in a loop after
hangup, depending upon the state of terminal shutdown (accepting EOF or
ESC cares about cbreak mode?). Make xwaitforspace() become a no-op during
hangup processing.
vms's call to hangup() from an exit handler took place after the
terminal has been reset (the exit handler for the latter is registered
later so executes sooner). Then exit_nhwindows() resulted in a second tty
reset attempt and settty() -> setctty() encountered an error (which it
reported, triggeting a getret() call). Make the vms code correctly guard
against multiple resets.
This patch attempts to add some levels of unicode support
to NetHack.
The master on/off switch for any Unicode support is
defining UNICODE_SUPPORT in config.h. Currently
there is code support for two subsets of unicode support:
UNICODE_DRAWING
If UNICODE_DRAWING is defined, then the data
structures used to house drawing symbols are expanded
to the size of wchar_t, big enough to hold unicode characters.
A typdef called `nhsym' is involved and if UNICODE_DRAWING
is defined, it is wchar_t, otherwise it is uchar.
UNICODE_WIDEWINPORT
If UNICODE_WIDEWINPORT is defined, then the data
structures inside the window port are expanded to the size of
wchar_t, big enough to hold unicode characters. Both map
symbols and text within the window port are expanded, in order
for potential support for displaying multinational characters some
day, but this patch only provides viewing of map symbols.
A typdef called `nhwchar' is involved and if UNICODE_WIDEWINPORT
is defined, it is wchar_t, otherwise it is char.
The only window port with code support for UNICODE_WIDEWINPORT
currently is the TTY port. Don't enable UNICODE_WIDEWINPORT
unless:
- it is a TTY port
- the underlying platform specific routines can
handle the larger data structures.
Don't enable UNICODE_SUPPORT unless:
- your compiler can handle wchar_t.
- your compiler can accept L'a' characters.
- your compiler can accept L"wide" strings.
Note that if your compiler can handle the above, you could
enable the larger data structures (currently if TTY) even if your
platform can't actually display unicode or UTF-8, by messing
with u_putch() in win/tty/wintty.c to only deal regular chars.
That should be the only function that actually pushes wide characters
out to the display.
If you enable UNICODE_SUPPORT, and your platform is capable
you will need to turn on the unicode run-time option to be able to
load unicode character sets from the symbol file, to be able to
push unicode characters to the display. You'll also want to load
a unicode symbol set once the unicode option is toggled on. In
a config file you would do that via these two lines:
OPTIONS=unicode
OPTIONS=symset:Unicode_non_US
The repository was stamped with NETHACK_PRE_UNICODE
prior to applying this patch, and stamped with
NETHACK_POST_UNICODE afterwards. The code differences
between those two tagged versions are this patch.
This is an initial round of SAFERHANGUP hangup changes. It introduces
SAFERHANGUP, provides the core framework, and enables it for UNIX.
Window-port changes are provided for win/tty, win/X11 and win/gnome. Qt
changes should be forthcoming after having Warwick look at them.
window.doc is updated so windowport maintainers have an clue what needs to
be done to support SAFERHANGUP.
The problem with the new autocomplete was tracked down to
be the result of differences between different implementations
of backsp(). The differences go all the way back to the
early MSDOS port by the look of it, and the win32,
and Mac tty ports all seemed to pattern themselves after the
MSDOS port for that routine. Apparently, it didn't cause any
harm until now.
The problem is that backsp() sends a character sequence
of 0x08, 0x20, 0x08 on at least those ports, where the Unix
tty code only sends 0x08. So the characters in the new
autocomplete were all being erased from the screen.
This patch only fixes the win32 tty port, so I've left the
conditional code in getline.c for DOS and Mac. I
Change tty extended command autocomplete, based loosely on <Someone>'s
patch, to allow you to type autocompleted characters. That is, you can type
characters the autocompleter inserted without invalidating the command.
I haven't looked closely, but at least some other windowport extended
command readers seem to already behave similarly.
I've found myself adding a trailing space to various extend
commands from time to time, and the program fails to recognize then
when that happens. It might be less likely once none of them has
any embedded spaces, but this wouldn't hurt anything if that becomes
the case.
by <Someone>
(the following text accompanies the patch at <Someone>'s web page)
add more configurability to the new msg_window option of [..]3.4.0.
It allows the configuration option to take an optional parameter to
specify the style of message history display to use.
allows the following configuration options:
msg_window:s - single message (as was the default in 3.3.0)
msg_window:c - combination; two messages in 'single', then as 'full'
msg_window:f - full window; oldest message first
msg_window:r - full window reversed; newest message first
In the event of no parameter being provided,
the patch is compatible with the current 3.4.0 behaviour:
msg_window = 'full'
!msg_window = 'single'
msg_window can be configured for these options in the
Options menu (Shift-O)
msg_window stores the current window type in the non-persistent
iflags structure, which means that savefile/bones files should be
100% compatible with Vanilla, but at the disadvantage that your
customisations to msg_window will be replaced with your
defaults.nh (or ~/.nethackrc) value every time you restart a saved game.
Credits:
The patch draws inspiration (and code snippets) extensively
from <Someone>'s original msg_window patch, [...] as well as <Someone>'s code for reverse ordering implemented until recently in
Slash'em.
- attempt to determine if tty_wait_synch() is called during the ending
dialogs due to an interrupt, and not re-display the previous message
at the wrong time
- also, "msg_window display anomaly" fix was missing code to still treat ^P
properly while in a prompt
