Switch to using a macro invocation Verbos(n, s) in place of the
flags.verbose checks.
Provide the mechanics for individual suppression of any of the
existing messages that were considered verbose.
Mechanics only - this code update does not provide any means of
setting the suppression bits.
iflags.verbose = 0
is still a master suppression of all the verbose messages.
iflags.verbose = 1
turns on the verbose messages only for those whose suppression
bit is 0 (not set).
instead of as fake bear traps
Use the new traps and their tiles when confused gold detection finds
trapped doors and trapped chests. (Large boxes can be trapped too;
they use the trapped chest trap and corresponding tile rather than
have their own.)
Usually these pseudo-traps go away when as soon as they are within
line of sight. (While testing, I noticed that seeing a trapped door
from outside its room rather than inside didn't behave that way.
The door was created by wizard mode wishing; I don't know whether
that was a factor.)
I also discovered that secret doors weren't being handled correctly.
They can't be trapped because of their use of both the doormask and
wall_info overlays of levl[][].flags, but I had a secret door be
falsely displayed as a trap. This fixes that.
We should have obj->tknown and rm->D_TRAPKNOWN so that the hero won't
forget about these traps after declining to attempt to untrap them.
But that's more work than I care to tackle.
Cursed potions of object detection were showing all mimics disguised as
statues as 'i' glyphs, because object_detect used PM_TENGU as the
corpsenm of any mimic disguise. Instead, use MCORPSENM when available
so that hidden mimics will be mapped with glyphs corresponding to their
actual disguises.
Instead of returning 0 or 1, we'll now use ECMD_OK or ECMD_TURN.
These have the same meaning as the hardcoded numbers; ECMD_TURN
means the command uses a turn.
In future, could add eg. a flag denoting "user cancelled command"
or "command failed", and should clear eg. the cmdq.
Mostly this was simply replacing return values with the defines
in the extended commands, so hopefully I didn't break anything.
Replace some
(foo &&
bar)
that had crept back into the code with
(foo
&& bar)
to match the reformatting which took place before 3.6.0. There are a
couple of lines ending in '||' still present but they look intentional.
isaac64.c has some trailing '|' bit operators that could/should be
moved to the start of the next line but I didn't touch that file.
While in the affected files, I tried to shorten most overly wide lines
(the right margin is supposed to at column 78 and there are quite a
few lines which are 79 characters long, but I left most of those
rather than introduce new line splits). Also replace a handful of
tabs with spaces. I was a little surprised not find any trailing
spaces (in the dozen or so files being updated). I didn't look for
trailing arithmetic or '?'/':' operators which aught to be moved to
the start of the next line.
Doesn't currently happen as no Soko levels use secret doors,
but handle them anyway gracefully.
Secret doors have their doormask set, but it's overloaded wall_info.
The display routines aren't happy with D_CLOSED in wall_info.
Report raises two issues:
1) if you perform magic mapping while engulfed (or underwater) the
map got updated and player could view it with cursor+autodescribe,
but when done viewing it did not switch back to the limited engulfed
(or underwater) display.
2) when picking a teleport destination while engulfed/underwater you
have to pick the spot while seeing only the limited view of the map
that is shown while engulfed/underwater.
This fixes#1. I'm inclined to classify #2 as traditional behavior
and am not going to try to figure out a fix for it.
Fixes#483
"Demote" wizmgender from an obscure wizard mode extended command
to an obscure wizard mode boolean option. Behaves the same except
that no message is given when the value gets toggled.
This replaces the arcane system previously used by getobj where the
caller would pass in a "string" whose characters were object class
numbers, with the first up to four characters being special constants
that effectively acted as flags and had to be in a certain order.
Because there are many places where getobj must behave more granularly
than just object class filtering, this was supplemented by over a
hundred lines enumerating all these special cases and "ugly checks", as
well as other ugly code spread around in getobj callers that formatted
the "string".
Now, getobj callers pass in a callback which will return one of five
possible values for any given object in the player's inventory. The
logic of determining the eligibility of a given object is handled in the
caller, which greatly simplifies the code and makes it clearer to read.
Particularly since there's no real need to cram everything into one if
statement.
This is related to pull request #77 by FIQ; it's largely a
reimplementation of its callbacks system, without doing a bigger than
necessary refactor of getobj or adding the ability to select a
floor/trap/dungeon feature with getobj. Differences in implementation
are mostly minor:
- using enum constants for returns instead of magic numbers
- 5 possible return values for callbacks instead of 3, due to trying to
make it behave exactly as it did previously. PR #77 would sometimes
outright exclude objects because it lacked semantics for invalid
objects that should be selectable anyway, or give slightly different
messages.
- passing a bitmask of flags to getobj rather than booleans (easier to
add more flags later - such as FIQ's "allow floor features" flag, if
that becomes desirable)
- renaming some of getobj's variables to clearer versions
- naming all callbacks consistently with "_ok"
- generally more comments explaining things
The callbacks use the same logic from getobj_obj_exclude,
getobj_obj_exclude_too and getobj_obj_acceptable_unlisted (and in a few
cases, from special cases still within getobj). In a number of them, I
added comments suggesting possible further refinements to what is and
isn't eligible (e.g. should a bullwhip really be presented as a
candidate for readying a thrown weapon?)
This also removed ALLOW_COUNT and ALLOW_NONE, relics of the old system,
and moved ALLOW_ALL's definition into detect.c which is the only place
it's used now (unrelated to getobj). The ALLOW_ALL functionality still
exists as the GETOBJ_PROMPT flag, because its main use is to force
getobj to prompt for input even if nothing is valid.
I did not refactor ggetobj() as part of this change.
further adjustments to the window port interface to pass a pointer
to a glyph_info struct which describes not just the glyph number
itself, but also the ttychar, the color, the glyphflags, and the
symset index.
This affects two existing window port calls that get passed glyphs
and does the parameter consistently for both of them using the
glyph_info struct pointer:
print_glyph()
add_menu().
The recently added glyphmod parameter is now unnecessary and has been
removed.
remove unintentionally left M2_MALE flag on dwarf lord/lady/leader
provide a way to verify gender information relayed from the core
in debug mode on tty via #wizmgender debugging extended command
add MALE, FEMALE, and gender-neutral names for individual monster species
to the mons array. The gender-neutral name (NEUTRAL) is mandatory, the
MALE and FEMALE versions are not.
replace code uses of the mname field of permonst with one of the three
potentially-available gender-specific names.
consolidate some separate mons entries that differed only by species into a
single mons entry (caveman, cavewoman and priest,priestess etc.)
consolidate several "* lord" and "* queen/* king" monst entries into
their single species, and allow both genders on some where it makes some
sense (there is probably more work and cleanup to come out of this at some
point, and the chosen gender-neutral name variations are not cast in stone
if someone has better suggestions).
related function or macro additions:
pmname(pm, gender) to get the gender variation of the permonst name. It
guards against monsters that haven't got anything except NEUTRAL naming
and falls back to the NEUTRAL version if FEMALE and MALE versions are
missing.
Ugender to obtain the current hero gender.
Mgender(mtmp) to obtain the gender of a monster
While the code can safely refer directly to pmnames[NEUTRAL] safely in the
code because it always exists, the other two (pmnames[MALE] and
pmnames[FEMALE] may not exist so use:
pmname(ptr, gidx)
where -ptr is a permonst *
-gidx is an index into the pmnames array field of the
permonst struct
pmname() checks for a valid index and checks for null-pointers for
pmnames[MALE] and pmnames[FEMALE], and will fall back to pmnames[NEUTRAL] if
the pointer requested if the requested variation is unavailable, or if the
gidx is out-of-range.
Allow code to specify makemon flags to request female or male (via MM_MALE
and MM_FEMALE flags respectively)to makedefs, since the species alone doesn't
distinguish male/female anymore. Specifying MM_MALE or MM_FEMALE won't
override the pm M2_MALE and M2_FEMALE flags on a mons[] entry.
male and female tiles have been added to win/share/monsters.txt.
The majority are duplicated placeholders except for those that were
separate mons entries before. Perhaps someone will contribute artwork in the
future to make the male and female variations visually distinguishable.
tilemapping via has the MALE tile indexes in the glyph2tile[]
array produced at build time. If a window port has information that the
FEMALE tile is required, it just has to increment the index returned
from the glyph2tile[] array by 1.
statues already preserved gender of the monster through STATUE_FEMALE
and STATUE_MALE, so ensure that pmnames takes that into consideration.
I expect some refinement will be required after broad play-testing puts it to
the test.
consolidate caveman,cavewoman and priest,priestess monst.c entries etc
This commit will require a bump of editlevel in patchlevel.h because it alters
the index numbers of the monsters due to the consolidation of some. Those
index numbers are saved in some other structures, even though the mons[] array
itself is not part of the savefile.
Window Port Interface Change
Also add a parameter to print_glyph to convey additional information beyond
the glyph to the window ports. Every single window port was calling back to
mapglyph for the information anyway, so just included it in the interface and
produce the information right in the display core.
The mapglyph() function uses will be eliminated, although there are still some
in the code yet to be dealt with.
win32, tty, x11, Qt, msdos window ports have all had adjustments done to
utilize the new parameter instead of calling mapglyph, but some of those
window ports have not been thoroughly tested since the changes.
Interface change additional info:
print_glyph(window, x, y, glyph, bkglyph, *glyphmod)
-- Print the glyph at (x,y) on the given window. Glyphs are
integers at the interface, mapped to whatever the window-
port wants (symbol, font, color, attributes, ...there's
a 1-1 map between glyphs and distinct things on the map).
-- bkglyph is a background glyph for potential use by some
graphical or tiled environments to allow the depiction
to fall against a background consistent with the grid
around x,y. If bkglyph is NO_GLYPH, then the parameter
should be ignored (do nothing with it).
-- glyphmod provides extended information about the glyph
that window ports can use to enhance the display in
various ways.
unsigned int glyphmod[NUM_GLYPHMOD]
where:
glyphmod[GM_TTYCHAR] is the text characters associated
with the original NetHack display.
glyphmod[GM_FLAGS] are the special flags that denote
additional information that window
ports can use.
glyphmod[GM_COLOR] is the text character
color associated with the original
NetHack display.
Support for including the glyphmod info in the display glyph buffer
alongside the glyph itself was added and is the default operation.
That can be turned off by defining UNBUFFERED_GLYPHMOD at compile time.
With UNBUFFERED_GLYPHMOD operation, a call will be placed to map_glyphmod()
immediately prior to every print_glyph() call.
If you set COLNO larger than BUFSZ, few places cause a buffer overrun.
Add a new buffer size definition, COLBUFSZ, which is the larger of
COLNO and BUFSZ, used in places that care about a screen-wide string.
When SCORE_ON_BOTL is enabled, you could tell how much gold is
inside a container with unknown contents by having 'showsore' On
and watching how much the score changed on the status line when
picking the container up.
Allow crystal ball to search for furniture (stairs and ladders,
altar, throne, sink, fountain) as well as for a class or objects
or of monsters or all traps. Giving any of '<','>','_','\','#',
or '{' will find all of those rather than just the individual type
specified. Because of the default character conflict, '_' can no
longer be used to find chains; looking for altars is more useful.
The chance of getting the cursed effect due to failing a saving
throw against intelligence when the ball isn't actually cursed has
been reduced. If it is the hero's own quest artifact, it will
happen if rnd(8) is greater than Int, so Int of 8 or more will
never yield that effect. Otherwise if it is blessed, rnd(16) is
used so 16 or better Int means it can't act like it is cursed.
When uncursed and not hero's quest artifact, the old rnd(20) > Int
test is still used.
Crystal balls now start with 3..7 charges rather than 1..5, and
blessed charging sets the amount to 7 charges rather than 6 and
also blesses the ball. Recharing with uncursed scroll of charging
is slightly better (adds 1..2 charges instead of always just 1,
caps the amount at 7 rather than 5) and uncurses the ball. Cursed
scroll strips off all charges even if the ball is blessed and also
curses the ball so is harsher than before.
Crystal balls now cancel to -1 instead of 0, like wands, and using
one effect will destroy it, like zapping cancelled wands.
Also a minor tweak to the initial charges for can of grease (5..25
instead of 1..25) and horn of plenty and bag of tricks (both now
3..20 instead of 1..20).
Monster detection skipped dead monsters during fmon traversal but
found semi-dead guard parked at <0,0> waiting to remove temporary
vault corridor. If that happened to be the only monster found then
the feedback was incorrect (a blank map showing no found monsters
instead of a strange feeling). Object detection found semi-dead
guard's inventory and might report incorrectly too although the
chance of that being the only objects found on the level is a lot
less than it being the only monster.
When rest and search refuse to operate because a hostile monster is
adjacent, include a reminder of how to force them to operate. Every
time if 'cmdassist' is On, or just once until after some subsequent
try actually does something.
This new rest and search behavior probably needs to be optional and
default to the old behavior. It isn't uncommon to deliberately rest
while adjacent to a hostile monster if also adjacent to a peaceful
one and trying to wait for Stun or Confusion to time out, or maybe
search while next to such a monster hoping to find a secret door to
run away through. A count prefix won't work and needing an extra
keystroke each time is going to be an annoyance.
Generally speaking there's no reason to wait or search next to
a hostile monster, so let's just prevent those actions. You can
still do those commands by prefixing them with the 'm' prefix.
When a drum of earthquake targets a secret door, reveal it (which
is always followed by collapsing the door), and when it targets a
secret corridor, reveal that corridor. Both situations also place
a pit at the location.
Bite the bullet and add a special purpose boolean option to control
game behavior for random clairvoyance. When objects or monsters are
discovered, it normally issues "you sense your surroundings" and
performs a getpos() operation which allows the player to browse the
map by moving the cursor around and getting 'autodescribe' feedback.
But there have been complaints that once the hero has the Amulet
(which triggers random clairvoyance even though hero isn't flagged
as having that attribute) the message and pause-to-browse become too
intrusive.
This was initially combined with the 'timed clairvoyance' fix because
they both bump EDITLEVEL to invalidate existing save files, but their
details don't interact so I separated them.
This adds a boolean option, autounlock, defaulting to true. When this is
set to TRUE, messages stating that some door or container is locked are
automatically followed by a prompt asking if you would like to unlock
it, if you are carrying an unlocking tool (key, lock pick, or credit
card).
Architecturally, this extends the pick_lock function to take three
additional arguments (door coordinates or a box on the ground you are
autounlocking).
The code that selects an unlocking tool will always look first for a
skeleton key, then a lock pick, then a credit card. Since curses, rust,
and other attributes don't really have an effect on the viability of the
unlocking device, it didn't seem to warrant making a more complex
function for that.
Add hallucinatory trap names
This adds many funny, realistic, and nonsensical traps to the game, to
be shown when the player is hallucinating.
Architecturally, the biggest change is merging the what_trap macro and
the "defsyms[trap_to_defsym(ttyp)].explanation" pattern into a single
function "trapname", which returns the name of the trap, handling the
hallucination case. There is also a second parameter used for overriding
hallucination in the occasional cases where the actual trap name should
always be returned.
In addition, the what_trap and random_trap macros are now obsolete and
not used anywhere, so they are removed.
reinstate anti-rng abuse bit on hallucination
updates to hallucinatory trap names and fixes37.0 entry
When a monster is drawn on the map, remove any "remembered, unseen
monster" glyph being shown at the same spot. Clairvoyance shows
all monsters in vicinty, then ones which can't be seen are replaced
with the 'I' glyph (which is on the object layer or the display,
not the monster layer show is subject to different update behavior).
But subsequent monster refresh didn't get rid of it when a sensed
monster was displayed over it. (3.6.1 included a similar fix for
warned-of monsters.)
Also during clairvoyance, don't draw an 'I' at a spot that will
immediately be refreshed with a monster because 'I' clobbers any
remembered object at the same location.
A few symbol-related modifications:
- fulfill a request from a blind player to allow them to
specify a unique/recognizable character for all pets and/or
the player in the config file for use when using a screen
reader (S_player_override, S_pet_override). Requires sysconf
setting ACCESSIBILITY to be set to have an effect, although
they can still be specified in the config file.
- Config file SYMBOLS entries were not working properly on
the rogue level. Allow ROGUESYMBOLS as well as SYMBOLS to be
specified in the config file independently.
- When values are moved into showsyms[], the overriding SYMBOLS
or ROGUESYMBOLS entry from the config file is used if there is
one; if there is no overriding value for a particular symbol,
the loaded symset value is used; if there is no symset entry
loaded for the symbol then a default symbol is used.
Wizard mode ^E and any mode spell of detect unseen or wand of secret
door detection failed to find mon->mundetected monsters if they were
hiding under objects, and failed to find those or other hiders or
mimics when the hidden monster was at a trap location. The fix for
the latter initially only worked if the trap was known, so took two
tries when a monster hid at the location of an unseen trap. So this
makes the additional change to find both things at the same time; it
isn't manual searching that stops as soon as something is found.
Preserve temporary fake object's previous dknown value by storing it
as a flag value within the m_ap_type field of the posing monster, and
recalling it when it is needed.
This is intended to help eliminate observable differences in price display
between real objects and mimics posing as objects.
98% of this is just switching the code to utilize macro M_AP_TYPE(mon)
everywhere to ensure that the flag bits are stripped off when needed.
It's a gameplay-affecting action (it updates the character's
memory of the map), and there's no way to spam it without using
resources, so rn2 is safe.
This is branched from Alex's hallu-rng-stability branch,
with two build corrections (detect.c, zap.c), and merged
with the isaac64 branch that we have ready to go.
Alex's dual rng is supported by setting up the array
of multiple isaac64 contexts.
I stuck with Alex's approach of passing the rng function
name around as the parameter (rng or rn2_on_display_rng)
for the new additional parameter needed for
set_random(), init_random(), reseed_random(),
and init_isaac64().
This is based on the multiple-RNGs code fron NetHack4, but using
only the parts relevant to the display RNG (and with substantial
changes, both because of post-3.4.3 changes, and because Nethack4's
display code is based on Slash'EM's rather than NetHack's).
