Rename ``kickobj'' to ``kickedobj'' so that the tense matches that
of ``thrownobj''. Also, move their declarations to decl.h and their
definitions to decl.c since usage has spread from dokick.c/dothrow.c to
various files and is about to expand to another one.
On crash signal or panic(), use a configurable method to get a stacktrace
the user can easily report to us. Currently only for Unix/Linux and only
ifdef BETA. Hopefully ports can add additional methods.
Bits:
- linux hints file had PREFIX definition in the wrong place
- sample sysconf file used wrong delimiter for WIZARDS
- fix grammar error in support message when using sysconf.wizards
- options.c comment typo
- capitalize "Crash test" output from #panic command
I almost abandoned this when Michael beat me to it, but besides
handling the fruit rename bug it also moves `current_fruit' into the
context structure to eliminate separate save/restore for that.
infrastructure for "system options" - things currently specified at build
time that should be changeable at install time or run time but not really
under user control
generalize contact info so it can be localized and it doesn't have to be
an email address
move recently introduced WIZARDS into sysopt
drop bogus OPTIONS=wizards possibility
new function build_english_list() to comma-ize and add 'or' from a whitespace separated list: A. A or B. A, B, or C.
syscf file now handles: WIZARDS SUPPORT RECOVER
SUPPORT specifies local support information
RECOVER will eventually supply port-specific and/or localized info on how
to run recover (or get it run for you).
Note: in sys/msdos I changed sys.o (generated from pcsys.c) to pcsys.o
Note: sys/msdos/Makefile.GCC has 2 rules for sys.o (now pcsys.o)
Add options SYSCF (to add a system-wide configuration file) and SYSCF_FILE
(for a file-based implementation of SYSCF) - this allows a binary distribution
to be configured at install time. The only option supported at this time is
WIZARDS - a list of usernames which can use -D; currently only for unix-likes
but should be extendable to anything that has a concept of multiple users.
Add mac tty multiuser config using sgid.
There was an issue reported where save files between different
versions of a manufacturer's compiler were incompatible because the time_t
ubirthday field was changed from 32 bits to 64 bits.
32 bit time_t implementations will break at 19:14:07 on January 18, 2038.
64 bit time_t implementations will break at 23:59:59 on December 31, 3000.
This removes the dependency on the size of time_t from the save file.
The ubirthday field is no longer embedded in struct you.
This also adds two general purpose routines to hacklib.c, one to convert a time
value to a 14 character char representation and the other to convert that
back to time_t. Those are used by the save/restore routines.
This is a savefile breaking change, so editlevel in patchlevel.h was
incremented.
Get rid of most of the vestiges of the old warning code that was
replaced over 7 years ago. I left the list of colors which were used for
warning flashes.
[See cvs log for src/cmd.c for more complete description.]
This turns clearlocks() into a no-op during the period when the UNIX
port is asking the user to confirm whether to overwrite an existing game.
Also, this removes the duplication of code and function between hangup()
and end_of_input(), and it simplifies the check for whether hangups are
supported by adding new macro HANGUPHANDLING. (I don't think global.h is
the best place to be defining that but I couldn't figure out where else
it would fit, other than repeating for individual xxxconf.h files.) And
adds a couple more done_hup checks to try to cope with situations where
rhack() is being bypassed. Lastly, having readchar() return EOF was
ignored for non-UNIX configs; now everybody gets ESC instead of letting
EOF be seen further inside the core.
This patch attempts to add some levels of unicode support
to NetHack.
The master on/off switch for any Unicode support is
defining UNICODE_SUPPORT in config.h. Currently
there is code support for two subsets of unicode support:
UNICODE_DRAWING
If UNICODE_DRAWING is defined, then the data
structures used to house drawing symbols are expanded
to the size of wchar_t, big enough to hold unicode characters.
A typdef called `nhsym' is involved and if UNICODE_DRAWING
is defined, it is wchar_t, otherwise it is uchar.
UNICODE_WIDEWINPORT
If UNICODE_WIDEWINPORT is defined, then the data
structures inside the window port are expanded to the size of
wchar_t, big enough to hold unicode characters. Both map
symbols and text within the window port are expanded, in order
for potential support for displaying multinational characters some
day, but this patch only provides viewing of map symbols.
A typdef called `nhwchar' is involved and if UNICODE_WIDEWINPORT
is defined, it is wchar_t, otherwise it is char.
The only window port with code support for UNICODE_WIDEWINPORT
currently is the TTY port. Don't enable UNICODE_WIDEWINPORT
unless:
- it is a TTY port
- the underlying platform specific routines can
handle the larger data structures.
Don't enable UNICODE_SUPPORT unless:
- your compiler can handle wchar_t.
- your compiler can accept L'a' characters.
- your compiler can accept L"wide" strings.
Note that if your compiler can handle the above, you could
enable the larger data structures (currently if TTY) even if your
platform can't actually display unicode or UTF-8, by messing
with u_putch() in win/tty/wintty.c to only deal regular chars.
That should be the only function that actually pushes wide characters
out to the display.
If you enable UNICODE_SUPPORT, and your platform is capable
you will need to turn on the unicode run-time option to be able to
load unicode character sets from the symbol file, to be able to
push unicode characters to the display. You'll also want to load
a unicode symbol set once the unicode option is toggled on. In
a config file you would do that via these two lines:
OPTIONS=unicode
OPTIONS=symset:Unicode_non_US
The repository was stamped with NETHACK_PRE_UNICODE
prior to applying this patch, and stamped with
NETHACK_POST_UNICODE afterwards. The code differences
between those two tagged versions are this patch.
This is an overhaul to the NetHack drawing mechanism.
- eliminates the need to have separate lists in drawing.c
for the things and their associated explanations by grouping
those thing together on the same inializer in a struct.
- replaces all of these options: IBMgraphics, DECgraphics, MACgraphics,
graphics, monsters, objects, boulder, traps, effects
- drawing.c contains only the set of NetHack standard symbols for
the main game and a set of NetHack standard symbols for the
roguelevel.
- introduces a symbols file that contains named sets of
symbols that can be loaded at run time making it extensible
for situations like multinational code pages like those reported
by <Someone>, without hardcoding additional sets into the game code.
- symbols file uses names for the symbols, so offsets will not break
when new things are introduced into the game, the way the older
config file uchar load routines did.
- symbols file only contains exceptions to the standard NetHack
set, not entire sets so they are much less verbose than all of
the g_FILLER() entries that were previously in drawing.c
- 'symset' and 'roguesymset' config file options for
preselecting a symbol set from the file called 'symbols'
at startup time. The name of the symbols file is not under the
users control, only the symbol set name desired from within the
symbols file is.
- 'symset' config file option loads a desired symbol set for
everything but the rogue level.
- 'roguesymset' config file option loads a desired symbol set
for the rogue level.
- 'SYMBOLS' config file option allows the user to specify replacement
symbols on a per symbol basis. You can specify as many or as few symbols
as you wish. The symbols are identified by a name:value pair, and line
continuation is supported. Multiple symbol assignments can be made on
the same line if each name:value pair is separated by a comma.
For example:
SYMBOLS = S_bars:\xf0, S_tree: \xf1, S_room:\xfa \
S_fountain:\xf4 \
S_boulder:0
- 'symbols' file has the following structure:
start: DECgraphics
Handling: DEC
S_vwall: \xf8 # meta-x, vertical rule
S_hwall: \xf1 # meta-q, horizontal rule
finish
start: IBMgraphics
Handling: IBM
S_vwall: \xb3 # meta-3, vertical rule
S_hwall: \xc4 # meta-D, horizontal rule
finish
- 'symbols' file added to the source tree in the dat directory
- Port Makefiles/scripts will need to be adjusted to move them into
HACKDIR destination
Add support requested by a user for number_pad:3 to use a phone-style
keypad layout where 1,2,3 are on the top row and 7,8,9 on the bottom,
opposite of the adding machine layout adopted by computer keyboards. Also
number_pad:4 combines that with the number_pad:2 hack to give different
behavior for the 5 key (also meta-5 and meta-0). And number_pad:-1 is a
rather absurd way to support German keyboards which have y and z keys
swapped, avoiding the need to add a new option for that. With it, z moves
upper-left and y zaps wands, with corresponding swap of the upper case,
control, and meta variations of those two letters. (There is a "German
keyboard patch" for this floating around the net, but it implements a
compile time configuration setting which results in hard-coded behavior
for those keys. This implementation lets it be toggled on or off at will.)
There's more here, intended to ultimately simplify rhack() quite a
bit. Most of that isn't finished yet. However, the part that is done
should produce same run-time behavior as before. I hope....
iflags.num_pad and iflags.num_pad_mode should now be viewed as opaque
items used for communicating dynamically updated option settings to the
core only. Ports and/or interfaces which feel inclined to peek at them
should switch to Cmd.num_pad,&c instead. (I've made that switch for a
couple of places which would have stopped compiling due to sdir and ndir
going away, and for vms+tty where I could directly test the change(s),
possibly plus one or two places which got heldover over from my earlier
attempt that did try to update all of them. Ports which haven't made the
change yet ought to continue to work as-is though.)
Eventually ports/interfaces which implement alternate ways to invoke
commands (pull down menus or extra keyboard buttons or whatever) should be
able to scan Cmd.commands[] to figure out which input characters trigger
which nethack functions. The ones that currently use hardcoded key lists
will probably need to migrate before any dynamic key binding functionality
gets implemented. (Which may never happen; it's definitely not on my own
to-do list.) Cmd.serialno is intended to be the way for them figure out
when the commands have been changed (which right now only happens when 'O'
is used to alter the number_pad setting); perhaps a new interface callback
would be better suited for communicating this.
It may be necessary to rearrange header inclusion so that func_tab.h
gets included before flag.h (and/or struct cmd gets moved from the latter
to the former--but then func_tab.h would be needed in a bunch of places
which don't currently use it) to support some pre-ANSI compilers. And the
command initialization might need to be moved to somewhere earlier than
init_options() at some point if port/interface initialization starts caring
about it.
o Add support for zlib compression via ZLIB_COMP in config.h (ZLIB_COMP
and COMPRESS are mutually exclusive).
o rlecomp and zerocomp are run time options available if RLECOMP and
ZEROCOMP are defined, but not turned on by default if either COMPRESS
or ZLIB_COMP are defined.
o Add information to the save file about internal compression options
used when writing the save file, particularly rlecomp and zerocomp
support.
o Automatically adjust rlecomp and zerocomp (if support compiled in)
when reading in an existing savefile that was saved with those options
turned on. Still allows writing out of savefile in preferred format.
o In order to support zlib and not conflict with compress and uncompress
routines there, the NetHack internal functions were changed to
nh_uncompress and nh_compress as done in the zlib contribution received
in 1999 from <Someone>.
I tagged the sources NETHACK_3_5_0_PREZLIB prior to applying these
changes.
Fix the wizard mode crash From a bug report. Move the WIZKIT
message suppression to a lower level instead of trying to guard against
present and future pline() calls in the wishing code. The way that was
being handling wasn't suitable for dealing with quest feedback.
This also includes a couple of additional wishing synonyms.
on Sunday, April 4, 2004 at 20:27:06:
> On occassion when restoring a game where the
> character is wielding Sting, floor glyphs
> will show up before the --more-- prompt.
> These floor glyphs usually correspond to the
> location of monsters (sometimes they are just
> cavern features such as walls). Some of these
> floor glyphs are not in the character's line
> of sight upon restoring.
Also in this patch is a restore of Sting's ability
to glow blue.
This provides the core support needed for status field highlighting.
This patch doesn't actually perform status field highlighting for any port,
but provides the core hooks for doing so.
The syntax is:
OPTIONS=hilite_status:{fieldname}/{threshold}/{below}/{above}
where {fieldname} is the name of a status field.
{threshold} is the value used as the threshold to trigger a display
change. It can also be set to "updown" to trigger
a display change whenever it rises or whenever it falls.
If you end the threshold value with %, then it signifies
that you want to trigger the display change based on the
percentage of maximum.
{below}, {above}
are the color or display attribute that you want to use when
the field value is underneath the threshold. Supported display
fields are: normal, inverse, bold, black, red, green,
brown, blue, magenta, cyan, gray, orange,
bright-green, yellow, bright-blue, bright-magenta,
bright-cyan, or white.
Valid field names are:
alignment, armor-class, carrying-capacity,
charisma, condition, constitution, dexterity,
dungeon-level, experience-level, experience,
gold, HD, hitpoints-max, hitpoints, hunger,
intelligence, power-max, power, score,
strength, time, title, wisdom
Refer to window.doc for details. Guidebook updates to come later.
Introduction of a new set of window port status display
routines. The new routines are conditional on
STATUS_VIA_WINDOWPORT
being defined in config.h. See the experimental section,
where the #define resides for the time being.
An enhancement to the original to allow
two types of exceptions:
always pickup
never pickup
To specify "never pickup", begin the pattern string with '>'
which is NetHack's down direction symbol (for "leave it down")
To specify "always pickup", begin the pattern string with '<'
which is NetHack's up direction symbol.
For example, to pick up all arrows, regardless of the pickup_
types setting:
autopickup_exception = "<*arrows"
Add config.h experimental option AUTOPICKUP_EXCEPTIONS.
It's an interface-only change which allows you to add lines to your
config file to selectively avoid autopickup of items based on their
text description that is displayed when you pick them up. It does
it by matching a pattern against the xname singular return value.
For example:
autopickup_exception = "*corpse" will avoid picking up corpses, even if
food (%) is in your pickup_types.
autopickup_exception = "*brown*"
will avoid picking up any brown items (why, I do not know)
autopickup_exception = "*loadstone"
will NOT avoid picking up loadstones, unless they are already
identified, because the xname string will be "gray stone", so no
match there.
The matching has no knowledge of in-game objects, it is just
a text pattern match, thus it is an interface change, not a gameplay
change, and it is meant as a convenience for players.
Introduce a new set of functions to manage delayed killers in the trunk, used
in addressing the various reports of delayed killer confusion. Since existing
delayed killers are related to player properties, the delayed killers are
keyed by uprop indexes. I did this to avoid adding yet another set of
similar identifiers.
- the new delayed_killer() is used for stoning, sliming, sickness, and
delayed self-genocide while polymorphed. Some other timed events don't
use it (and didn't use the old delayed_killer variable) because they
use a fixed message when the timeout occurs.
- A new data structure, struct kinfo, is used to track both delayed and
immediate killers. This encapsulates all the info involved with
identifying a killer. The structure contains a buffer, which subsumes the
old killer_buf and several other buffers that didn't/couldn't use killer_buf.
- the killer list is saved and restored as part of the game state.
- the special case of usick_cause was removed and a delayed killer list
entry is now used in its place
- common code dealing with (un)sliming is moved to a new make_slimed function
- attempted to update all make dependencies for new end.c -> lev.h
dependency, sorry if I messed any up
Pat Rankin wrote:
> collect them all into some new struct and
> save that separately rather than jamming more non-option stuff
> into struct flags.
This patch:
- collects all context/tracking related fields from flags
into a new structure called "context."
It also adds the following to the new structure:
- stethoscope turn support
- victual support
- tin support
> I'm working on a Nethack port, and one of the header files a
> library uses has a structure with a member named "red". Since
> includes/decl.h #defines red to something, this totally loses.
>
> Attached is a patch which fixes the color defines.
<Someone> wrote:
> Linux, Redhat 7.1 nethack 3.4.0
>
>Please see attached patch file.
>
>I'm attempting to move more stuff into the "read-only" area, in
>preparation for a port to another OS.
The NOCWD_ASSUMPTIONS conditional code allows readonly
parts of NetHack to be separated from areas that require write-access.
This allows the recent panic log needed a prefix.
Replace "feature_toggle" implementation with an easier-to-understand
boolean option called "lootabc".
Provide "showrace", an option to display the hero by race glyph rather
than by role glyph.
Document the above.
Remove some obsolete Mac options.
This adds a generic feature_toggle mechanism to
the game. Code that wants to offer two different
ways of doing something can add an entry to
feature_toggles[] (in decl.c), and create a
preprocessor macro for its array index in decl.h.
Then the code can test it using
if (feature_toggle(FEATURE_NAME))
..do_this..
else
..do_that..
The player can toggle the alternate code path
on using OPTIONS=feature_toggle:feature_name_1 feature_name_2 ...
This seems better than creating brand new options
for controlling features (ala prayconfirm, which
could switch to this single option feature_toggle
mechanism as well)
My first use of it is to allow toggling of the selectors
on the loot menu, which I'm hesitant to just change back
because now people are actively using the new selectors and
the complaints would be really loud if the interface were
to just switch back after they adjusted.
The default behaviour is the new behaviour "iob", but with an
OPTIONS=feature_toggle:loot_menu_selectors
in your config file, it will revert to using "abc" as it did
in 3.3.1. I'll add a Guidebook page of "features/behaviour
that can be toggled" later.
The toggles can only be done in defaults.nh, and are
not saved with the game.
The autodig code still requires lots of interaction, because of all the
digging messages. Make these messages behave more like boulder pushing
messages, where they only display if the previous move wasn't a push.
>
> I'd like the default for "Would you like to see your <whatever>"
> at the end of a game to be "y" instead of "n". I haven't asked
> for full disclosure in order to have it skipped if I press the
> space bar once too often by mistake.
This changes the way the flags.end_disclose array is used to
allow what this request is asking for. It should be backward
compatible with previous "disclose" options.
The order that the end_disclore options are stored:
inventory, attribs, vanquished, genocided, conduct
There is an array in flags:
end_disclose[NUM_DISCLOSURE_OPT];
with option settings for the each of the following:
iagvc [see disclosure_options in decl.c]:
Legal setting values in that array are:
DISCLOSE_PROMPT_DEFAULT_YES ask with default answer yes
DISCLOSE_PROMPT_DEFAULT_NO ask with default answer no
DISCLOSE_YES_WITHOUT_PROMPT always disclose and don't ask
DISCLOSE_NO_WITHOUT_PROMPT never disclose and don't ask
Those setting values can be used in the option
string as a prefix to each disclosure option
to get the desired behaviour for that option.
For backward compatibility, no prefix is actually required,
and the presence of a i,a,g,v, or c without a prefix sets
the corresponding value to DISCLOSE_YES_WITHOUT_PROMPT;
The actual prefixes used are controlled by the following in flag.h:
#define DISCLOSE_PROMPT_DEFAULT_YES 'y'
#define DISCLOSE_PROMPT_DEFAULT_NO 'n'
#define DISCLOSE_YES_WITHOUT_PROMPT '+'
#define DISCLOSE_NO_WITHOUT_PROMPT '-'
As far as the docs go, I don't know if I've got the *roff
stuff right. The TeX stuff looks okay when I converted it to .pdf.
This increments EDITLEVEL. If that is a problem, I can
add a routine to restore.c to perform a conversion of the old
values in flags. Let me know.
