Reported by jeremyhetzler and confirmed by k2: dead monsters weren't
leaving corpses at the spot they died.
Don't set a monster's mx,my coordinates to 0,0 when taking it off the
map (unless it is migrating to another level; mx==0 is the bit of data
used to indicate that). Corpse drop happens after that and expects
the dead monster's former map coordinates to be intact.
Fixes#764
When wormgone() takes a long worm off the map, clear its stale mx,my
coordinates. None of its callers need those anymore.
Also a bit of potential long worm clean up that occurred to me when
I looked at object bypass handling. Expected to be a no-op here.
The change to zero out a monster's map coordinates when it is taken
off the map yesterday messed up migration between levels inside the
Wizard's tower. (Didn't apply when accompanying the hero between
levels, so probably unlikely to be noticed.)
Noticed while moving some replicated code into its own routine.
Reported directly to devteam by a hardfought player and also by
entrez. The recent mon_leaving_level() change resulted in objects
dropped by a dying monster not being displayed immediately.
It justed needed the relobj(mon, 0, FALSE) to relobj(mon, 1, FALSE)
change in m_detach() but this does some related cleanup in
mon_leaving_level()'s callers. wormgone() takes a long worm off the
map but leaves its stale coordinates set because some code relied on
that. This takes away the need for that but still doesn't actually
clear them.
This adds redundant 'return' statements at the end of a few void
functions that are longer than fits within a typical screen display.
They make searching for the end of the current routine in an editor
or pager easier without resorting to regular expressions and can
also be used to search for the beginning if/when preceding routine
ends in 'return' too.
From 6 year old email: m_detach (monster death or removal from play)
and relmon (monster migrating to another level) both take a monster
off the map but they weren't consistent with each other. Change them
to use a common routine for that.
I'm not sure whether the inconsistencies resulted in any bugs. The
email was concerned about handling for monsters that emit light, but
those aren't actually common to the two removal methods and turned
out to be ok.
Always give a message when creating a detected monster
during gameplay (as opposed to during level creation).
To prevent the message, use the MM_NOMSG flag for makemon.
Most places already handled their own messaging, but there
were some, such as bag of tricks, create monster magic
and random monsters created during gameplay that didn't.
Teleporting a monster only updated the map. Give a message
so blind players can get the same information.
Making a monster invisible gives the same message, if you
cannot detect invisible.
Several other places where monsters teleported themselves
now also give the same message.
It's redundant with g.moves, so there is no more need for it.
Way, way back, it looks like g.moves and g.monstermoves can and did
desync, where g.moves would track the amount of moves the player had
gotten (and would therefore increase faster if the player were hasted)
and g.monstermoves would track the amount of monster move cycles, aka
turns. But this has not been the case for a long time, and they both
increment together in the same location in allmain.c. There are no
longer any cases where they will not be the same value.
This is a save-breaking change because it changes struct
instance_globals, but I have not updated the editlevel in this commit.
Use (obj->spe & CORPSTAT_GENDER) for figurines as well as for
statues and corpses.
Support wishing for
"{female,male,neuter} {corpse,statue,figurine} [of <monster>]".
and
"{female,male,neuter} <monster> {corpse,statue,figurine}".
Also
"{corpse,statue,figurine} of {female,male,neuter} <monster>"
where the qualifier might be in the middle instead of a prefix.
add MALE, FEMALE, and gender-neutral names for individual monster species
to the mons array. The gender-neutral name (NEUTRAL) is mandatory, the
MALE and FEMALE versions are not.
replace code uses of the mname field of permonst with one of the three
potentially-available gender-specific names.
consolidate some separate mons entries that differed only by species into a
single mons entry (caveman, cavewoman and priest,priestess etc.)
consolidate several "* lord" and "* queen/* king" monst entries into
their single species, and allow both genders on some where it makes some
sense (there is probably more work and cleanup to come out of this at some
point, and the chosen gender-neutral name variations are not cast in stone
if someone has better suggestions).
related function or macro additions:
pmname(pm, gender) to get the gender variation of the permonst name. It
guards against monsters that haven't got anything except NEUTRAL naming
and falls back to the NEUTRAL version if FEMALE and MALE versions are
missing.
Ugender to obtain the current hero gender.
Mgender(mtmp) to obtain the gender of a monster
While the code can safely refer directly to pmnames[NEUTRAL] safely in the
code because it always exists, the other two (pmnames[MALE] and
pmnames[FEMALE] may not exist so use:
pmname(ptr, gidx)
where -ptr is a permonst *
-gidx is an index into the pmnames array field of the
permonst struct
pmname() checks for a valid index and checks for null-pointers for
pmnames[MALE] and pmnames[FEMALE], and will fall back to pmnames[NEUTRAL] if
the pointer requested if the requested variation is unavailable, or if the
gidx is out-of-range.
Allow code to specify makemon flags to request female or male (via MM_MALE
and MM_FEMALE flags respectively)to makedefs, since the species alone doesn't
distinguish male/female anymore. Specifying MM_MALE or MM_FEMALE won't
override the pm M2_MALE and M2_FEMALE flags on a mons[] entry.
male and female tiles have been added to win/share/monsters.txt.
The majority are duplicated placeholders except for those that were
separate mons entries before. Perhaps someone will contribute artwork in the
future to make the male and female variations visually distinguishable.
tilemapping via has the MALE tile indexes in the glyph2tile[]
array produced at build time. If a window port has information that the
FEMALE tile is required, it just has to increment the index returned
from the glyph2tile[] array by 1.
statues already preserved gender of the monster through STATUE_FEMALE
and STATUE_MALE, so ensure that pmnames takes that into consideration.
I expect some refinement will be required after broad play-testing puts it to
the test.
consolidate caveman,cavewoman and priest,priestess monst.c entries etc
This commit will require a bump of editlevel in patchlevel.h because it alters
the index numbers of the monsters due to the consolidation of some. Those
index numbers are saved in some other structures, even though the mons[] array
itself is not part of the savefile.
Window Port Interface Change
Also add a parameter to print_glyph to convey additional information beyond
the glyph to the window ports. Every single window port was calling back to
mapglyph for the information anyway, so just included it in the interface and
produce the information right in the display core.
The mapglyph() function uses will be eliminated, although there are still some
in the code yet to be dealt with.
win32, tty, x11, Qt, msdos window ports have all had adjustments done to
utilize the new parameter instead of calling mapglyph, but some of those
window ports have not been thoroughly tested since the changes.
Interface change additional info:
print_glyph(window, x, y, glyph, bkglyph, *glyphmod)
-- Print the glyph at (x,y) on the given window. Glyphs are
integers at the interface, mapped to whatever the window-
port wants (symbol, font, color, attributes, ...there's
a 1-1 map between glyphs and distinct things on the map).
-- bkglyph is a background glyph for potential use by some
graphical or tiled environments to allow the depiction
to fall against a background consistent with the grid
around x,y. If bkglyph is NO_GLYPH, then the parameter
should be ignored (do nothing with it).
-- glyphmod provides extended information about the glyph
that window ports can use to enhance the display in
various ways.
unsigned int glyphmod[NUM_GLYPHMOD]
where:
glyphmod[GM_TTYCHAR] is the text characters associated
with the original NetHack display.
glyphmod[GM_FLAGS] are the special flags that denote
additional information that window
ports can use.
glyphmod[GM_COLOR] is the text character
color associated with the original
NetHack display.
Support for including the glyphmod info in the display glyph buffer
alongside the glyph itself was added and is the default operation.
That can be turned off by defining UNBUFFERED_GLYPHMOD at compile time.
With UNBUFFERED_GLYPHMOD operation, a call will be placed to map_glyphmod()
immediately prior to every print_glyph() call.
Use a linked list to store stair and ladder information, instead
of having fixed up/down stairs/ladders and a single "special" (branch)
stair.
Breaks saves and bones.
Adds information to migrating objects and monsters for the dungeon
and level where they are migrating from.
Move clearing of polearm context from migrate_to_lev() to lower
level relmon(). Add missing transfer of polearm context from
old mon to new mon in replmon(). These days it seems to only be
used for creating a monster from saved traits, so polearm context
in it should be moot.
Issue was for dropping glob of green slime while swallowed by a
purple worm but also applied to pet eating habits. Green slime
corpse doesn't exist any more; check for glob instead.
Fixes#333
Ported from SpliceHack, and generalized to all shapeshifters (Splice
only implemented it for chameleons). It's very aggravating when your
powerful but hungry pet chows down on a shapeshifter before you can stop
them and then turns into something much more useless, so this aims to
prevent that.
The extreme circumstances under which a pet will eat a shapeshifter are:
1. The pet is starving, and prefers polymorph to starvation
2. The pet's tameness is 1
The reasoning behind the second condition is that if you mistreat your
pet almost to the point of untaming it, it might want to take a chance
on turning into something that might get some more respect from you.
Practically, whenever this happens, this will result in the player now
owning a newly polymorphed and *still* nearly feral pet.
mon_arrive() -> m_into_limbo() -> migrate_to_level() -> wormgone()
followed by place_monster() "for relmon". relmon() was changed (last
November, cc5bb44a9a) to not require
the monster be on the map, so just get rid of the place_monster() that
was trying to put the "gone" long worm at <0,0>.
Also, another m_into_limbo() bit: make mdrop_special_objs() check the
location and send any dropped items to random locations if the monster
dropping things isn't on the map, instead of placing them at <0,0>.
Seven year old suggestion was to have a killer bee eat royal jelly if
there was no queen around, then after a short delay it would become a
queen. This does that, with "no queen around" being "no queen bee on
current dungeon level" and the transformation happening immediately
with the "short delay" taking place after.
Pet killer bees will target nearby royal jelly if there's no queen,
hostile killer bees will only eat it if they happen to walk on the
same spot as one. Both types accept either tame or hostile queen bee
as an existing queen.
Killer bees eating royal jelly will drop dead if queen bees have been
genocided, and aren't smart enough to avoid the instinct to eat such
if/when that happens to be the situation.
During level change, when a monster from mydogs (monsters accompaying
hero, usually pets) couldn't be placed because the level was full, it
was set to migrate to that level (in order to get another chance to
arrive if hero left and returned). The code sequence
mon_arrive()-> mnexto()-> m_into_limbo()-> migrate_to_level()-> relmon()
tried to remove the monster from the map, but it wasn't necessarily on
the map (depending upon whether it couldn't arrive at all, or arrived
at the hero's spot and couldn't be moved out of the hero's way). The
EXTRA_SANITY_CHECKS for remove_monster() issued impossible "no monster
to remove". relmon() now checks whether monster is already off the map.
While investigating that, I discovered that pets set to re-migrate
to the same level to try again on hero's next visit didn't work at all.
migrating_mons gets processed after mydogs so moving something from
the latter to the former after arrival failure just resulted in
immediate second failure when the more general list was handled during
the hero's current arrival. And failure to arrive from migrating_mons
would kill the monster instead of scheduling another attempt.
The sanest fix for that turned out to be to have all monsters who
can't arrive be put back on the migrating_mons list to try again upon
hero's next visit. Pets still fail twice but are no longer discarded
during the second time, and now do arrive when hero leaves and comes
back provided he or she has opened up some space before leaving. If
there's still no space on the next visit, monsters who can't arrive
then are scheduled to try again on the visit after that.
Recent fix for invalid corpses becomes moot. Monsters aren't killed
during arrival failure so there are no resulting corpses to deal with.
Migrating monster attempting to arrive on a level which is already
full of monsters gets killed off. It was leaving a corpse without
regard for whether it was a type of of monster which should never
leave corpses.
I'd prefer that it be put back on the migrating_mons list rather
than be killed off, but this just suppresses impossible corpses.
