This is an overhaul to the NetHack drawing mechanism.
- eliminates the need to have separate lists in drawing.c
for the things and their associated explanations by grouping
those thing together on the same inializer in a struct.
- replaces all of these options: IBMgraphics, DECgraphics, MACgraphics,
graphics, monsters, objects, boulder, traps, effects
- drawing.c contains only the set of NetHack standard symbols for
the main game and a set of NetHack standard symbols for the
roguelevel.
- introduces a symbols file that contains named sets of
symbols that can be loaded at run time making it extensible
for situations like multinational code pages like those reported
by <Someone>, without hardcoding additional sets into the game code.
- symbols file uses names for the symbols, so offsets will not break
when new things are introduced into the game, the way the older
config file uchar load routines did.
- symbols file only contains exceptions to the standard NetHack
set, not entire sets so they are much less verbose than all of
the g_FILLER() entries that were previously in drawing.c
- 'symset' and 'roguesymset' config file options for
preselecting a symbol set from the file called 'symbols'
at startup time. The name of the symbols file is not under the
users control, only the symbol set name desired from within the
symbols file is.
- 'symset' config file option loads a desired symbol set for
everything but the rogue level.
- 'roguesymset' config file option loads a desired symbol set
for the rogue level.
- 'SYMBOLS' config file option allows the user to specify replacement
symbols on a per symbol basis. You can specify as many or as few symbols
as you wish. The symbols are identified by a name:value pair, and line
continuation is supported. Multiple symbol assignments can be made on
the same line if each name:value pair is separated by a comma.
For example:
SYMBOLS = S_bars:\xf0, S_tree: \xf1, S_room:\xfa \
S_fountain:\xf4 \
S_boulder:0
- 'symbols' file has the following structure:
start: DECgraphics
Handling: DEC
S_vwall: \xf8 # meta-x, vertical rule
S_hwall: \xf1 # meta-q, horizontal rule
finish
start: IBMgraphics
Handling: IBM
S_vwall: \xb3 # meta-3, vertical rule
S_hwall: \xc4 # meta-D, horizontal rule
finish
- 'symbols' file added to the source tree in the dat directory
- Port Makefiles/scripts will need to be adjusted to move them into
HACKDIR destination
This patch by <email deleted> was released
when 3.4.1 was current and has been incorporated into slash'em. It is
extremely useful while using ranged weapons. When both autopickup and
pickup_thrown are enabled, walking across previously thrown objects will
pick them up even if they don't match the current pickup_types list.
[See cvs log for patchlevel.h for longer description.]
This patch alters wiz_identify so that it displays an
inventory menu with all items shown identified
without actually identifying them.
You can just press ^I (or whatever the wiz_identify command
is) a second time, while the menu is displayed to actually identify
them (tested with TTY menus only).
The in_lava_effects flag should never be saved and restored; putting
it into the context struct was a mistake. Move it to the iflags struct
(where the branch code already has it). I haven't bumped the EDITLEVEL
setting. Save and bones files from more that a few days ago were breifly
invalid but should be viable again. Save and bones files from the past
couple of days are now no good; sorry about that.
Add support requested by a user for number_pad:3 to use a phone-style
keypad layout where 1,2,3 are on the top row and 7,8,9 on the bottom,
opposite of the adding machine layout adopted by computer keyboards. Also
number_pad:4 combines that with the number_pad:2 hack to give different
behavior for the 5 key (also meta-5 and meta-0). And number_pad:-1 is a
rather absurd way to support German keyboards which have y and z keys
swapped, avoiding the need to add a new option for that. With it, z moves
upper-left and y zaps wands, with corresponding swap of the upper case,
control, and meta variations of those two letters. (There is a "German
keyboard patch" for this floating around the net, but it implements a
compile time configuration setting which results in hard-coded behavior
for those keys. This implementation lets it be toggled on or off at will.)
There's more here, intended to ultimately simplify rhack() quite a
bit. Most of that isn't finished yet. However, the part that is done
should produce same run-time behavior as before. I hope....
iflags.num_pad and iflags.num_pad_mode should now be viewed as opaque
items used for communicating dynamically updated option settings to the
core only. Ports and/or interfaces which feel inclined to peek at them
should switch to Cmd.num_pad,&c instead. (I've made that switch for a
couple of places which would have stopped compiling due to sdir and ndir
going away, and for vms+tty where I could directly test the change(s),
possibly plus one or two places which got heldover over from my earlier
attempt that did try to update all of them. Ports which haven't made the
change yet ought to continue to work as-is though.)
Eventually ports/interfaces which implement alternate ways to invoke
commands (pull down menus or extra keyboard buttons or whatever) should be
able to scan Cmd.commands[] to figure out which input characters trigger
which nethack functions. The ones that currently use hardcoded key lists
will probably need to migrate before any dynamic key binding functionality
gets implemented. (Which may never happen; it's definitely not on my own
to-do list.) Cmd.serialno is intended to be the way for them figure out
when the commands have been changed (which right now only happens when 'O'
is used to alter the number_pad setting); perhaps a new interface callback
would be better suited for communicating this.
It may be necessary to rearrange header inclusion so that func_tab.h
gets included before flag.h (and/or struct cmd gets moved from the latter
to the former--but then func_tab.h would be needed in a bunch of places
which don't currently use it) to support some pre-ANSI compilers. And the
command initialization might need to be moved to somewhere earlier than
init_options() at some point if port/interface initialization starts caring
about it.
o Add support for zlib compression via ZLIB_COMP in config.h (ZLIB_COMP
and COMPRESS are mutually exclusive).
o rlecomp and zerocomp are run time options available if RLECOMP and
ZEROCOMP are defined, but not turned on by default if either COMPRESS
or ZLIB_COMP are defined.
o Add information to the save file about internal compression options
used when writing the save file, particularly rlecomp and zerocomp
support.
o Automatically adjust rlecomp and zerocomp (if support compiled in)
when reading in an existing savefile that was saved with those options
turned on. Still allows writing out of savefile in preferred format.
o In order to support zlib and not conflict with compress and uncompress
routines there, the NetHack internal functions were changed to
nh_uncompress and nh_compress as done in the zlib contribution received
in 1999 from <Someone>.
I tagged the sources NETHACK_3_5_0_PREZLIB prior to applying these
changes.
- always write plname into save file, no longer conditional
- add 'selectsaved' wincap option to control the display of
a menu of save files for ports/platforms that support it.
- add support for win32 tty using normal nethack menus.
- the win/tty/wintty code is generalized enough that any
tty port could support the option if the appropriate port-specific
code hooks for wildcard file lookups are added to src/file.c
specifically in the get_saved_games() routine. There is posix
code in there from Warwick already, and there is findfirst/findnext
code in there from win32. Warwick has the posix code only
enabled for Qt at present, but with wintty support, that could be expanded
to other Unix environments quite easily I would think.
Here is what the tty support looks like:
NetHack, Copyright 1985-2005
By Stichting Mathematisch Centrum and M. Stephenson.
See license for details.
Select one of your saved games
a - Bob
b - Fred
c - June
d - mine3
e - Sirius
f - Start a new character
(end)
The following files existed in the NetHack SAVEDIR directory
at the time:
ALLISONMI-Bob.NetHack-saved-game
ALLISONMI-Fred.NetHack-saved-game
ALLISONMI-June.NetHack-saved-game
ALLISONMI-mine3.NetHack-saved-game
ALLISONMI-Sirius.NetHack-saved-game
Note that despite the file names, the actual character name
is drawn from the savefile.
The WIN32CON support passes
USER-*.NetHack-saved-game
to findfirst/findnext where USER is your login name of course.
This provides the core support needed for status field highlighting.
This patch doesn't actually perform status field highlighting for any port,
but provides the core hooks for doing so.
The syntax is:
OPTIONS=hilite_status:{fieldname}/{threshold}/{below}/{above}
where {fieldname} is the name of a status field.
{threshold} is the value used as the threshold to trigger a display
change. It can also be set to "updown" to trigger
a display change whenever it rises or whenever it falls.
If you end the threshold value with %, then it signifies
that you want to trigger the display change based on the
percentage of maximum.
{below}, {above}
are the color or display attribute that you want to use when
the field value is underneath the threshold. Supported display
fields are: normal, inverse, bold, black, red, green,
brown, blue, magenta, cyan, gray, orange,
bright-green, yellow, bright-blue, bright-magenta,
bright-cyan, or white.
Valid field names are:
alignment, armor-class, carrying-capacity,
charisma, condition, constitution, dexterity,
dungeon-level, experience-level, experience,
gold, HD, hitpoints-max, hitpoints, hunger,
intelligence, power-max, power, score,
strength, time, title, wisdom
Refer to window.doc for details. Guidebook updates to come later.
An optimization.
Split the patterns into two chains, one for things you want "always picked up", and one for things you want "never picked up". That way, the
entire exception list isn't being checked twice, once for each type of
check. The check for things to "always pick up" only checks the
chain at the AP_GRAB index, and the check for things to "never
pick up" only checks the chain at the AP_LEAVE index.
- Also modifies the toggle autopickup '@' message
appropriately for the AUTOPICKUP_EXCEPTIONS build.
(it just tacks on ", with some exceptions" if there are some)
Add config.h experimental option AUTOPICKUP_EXCEPTIONS.
It's an interface-only change which allows you to add lines to your
config file to selectively avoid autopickup of items based on their
text description that is displayed when you pick them up. It does
it by matching a pattern against the xname singular return value.
For example:
autopickup_exception = "*corpse" will avoid picking up corpses, even if
food (%) is in your pickup_types.
autopickup_exception = "*brown*"
will avoid picking up any brown items (why, I do not know)
autopickup_exception = "*loadstone"
will NOT avoid picking up loadstones, unless they are already
identified, because the xname string will be "gray stone", so no
match there.
The matching has no knowledge of in-game objects, it is just
a text pattern match, thus it is an interface change, not a gameplay
change, and it is meant as a convenience for players.
There was a great deal of inconsistency in
different menus on how headings were displayed.
This allows the user to select what they like best.
I was motivated to do this, because I wasn't satisfied
with the appearance of ATR_INVERSE in the menus
on win32tty, and several of them specified it.
+ Separate the two uses of flags.soundok.
+ Player-settable option is now called "acoustics".
+ Deafness is now handled as a full-fledged attribute.
+ Check for deafness in You_hear(), rather than caller.
+ Check for deafness in caller, rather than verbalize(),
because gods can speak to characters in spite of deafness.
+ Since changes are being made to prop.h, reorder it to the
same order as youprop.h and enlightenment.
There are still some extraneous checks and missing checks
for deafness, which will be followed up in a future patch.
Because of the size of this patch and its savefile incompatibilities,
it is only being applied to the trunk code. Portions of this patch
were written by Michael Allison.
Pat Rankin wrote:
> collect them all into some new struct and
> save that separately rather than jamming more non-option stuff
> into struct flags.
This patch:
- collects all context/tracking related fields from flags
into a new structure called "context."
It also adds the following to the new structure:
- stethoscope turn support
- victual support
- tin support
<Someone> wishes to add a couple of new options to the wince port ("run fullscreen" and "do not use CE software keyboard").
The wincap field was full, so this adds a second field for
additional options.
This is derived from the proposed patch and feedback to it. This applies
the last-position cache behavior without an option, making the behavior
more like it is for interfaces with a mouse, where holding the mouse still
acts the same way as the travel cache. The code is not #ifdef'd either.
This allows the use of the right mouse button to
look at things on the screen when the
'clicklook' option is set.
Concept came from a patch for 3.4.0
that I saw referenced on r.g.r.n
[see http://www.steelskies.com/nethack.php]
but the implementation is different.
The number_pad option can now optionally hold a value
{0,1, 2 } for {off, on, DOS-mode} but plain number_pad and
!number_pad in config files still work as before.
When number_pad:2 is set, iflags.num_pad_mode is set to 1
which triggers the following behaviour:
> '5', M('5') and M('0') are mapped in rhack()
>in cmd.c, only when they are entered as a command. When used as a
>number, like in the 'n' command, no mapping takes place. '0' is
>already mapped to 'i' by the core. The
>only difference [<Someone>] left in (deliberately) is when you press Ctrl-0;
>this used to map to C('i'), which is an invalid command; now
>keep it '0' (which is interpreted as 'i' by the core.)
- Move the code for keystroke handling into its own source file.
- Compile and link it as a dynamic link library.
- Dynamically load the keystroke handler at runtime
- Add support for specifying a different handler in defaults.nh
so that internationalization issues can be dealt with without
rebuilding nethack, just supply alternative handlers in HACKDIR.
The following exported functions need to be present in
the keystroke handler .dll:
ProcessKeystroke - returns an ascii value to NetHack
NHkbhit - allows peeking to see if a key/mouse press is waiting
SourceWhere - returns location for souce code for a keystroke handler
SourceAuthor - returns author information for a keystroke handler
KeyHandlerName - returns the full or short name of the keystroke handling dll.
- Version change from 3.4.x
- timed_delay feature ignore in makedefs
- several flags from iflags to flags
- use offsets from mons array entries in save file rather than storing
the ptr and calculating the distance from beginning of array
For "traditional" menu style, pickup and #loot/apply can't accept an 'm'
response to bring up a menu upon request when all items involved are of
the same class, because the prompt where that response is allowed only
gets issued when multiple classes are present.
> - I'd like to see another option added: scroll_amount. In
> combination with scroll_margin, this would control the amount
> of squares the screen is scrolled when the scroll_margin is
> reached (currently, this amount is 1, but if I recall
> correctly, it used to be more). For example, if both were 5,
> when you came within 5 spaces of the left screen border, the
> screen would shift 5 spaces to the right).
Provide some command assistance for newbies, but
suppress it with !cmdassist in the config file.
If someone misinterprets the Guidebook ^D, ^T
type command notation, this will pop up some
further information to possibly assist them and
explain the notation.
Several flags added since 3.4.0 were destined for flags
(to be saved with the game) but were placed in iflags for
savefile compatibility. These include:
boolean lootabc; /* use "a/b/c" rather than "o/i/b" when looting */
boolean showrace; /* show hero glyph by race rather than by role */
boolean travelcmd; /* allow travel command */
int runmode; /* update screen display during run moves */
This patch has no effect unless you define this in your port's
XXconf.h file.
#define SAVEFILE_340_CONVERT /* allow moving of some iflags fields to flags
without destroying savefile compatibility */
Without it, the new flags remain in "iflags." With it, the flags are moved to
"flags" and the structures are converted when the save file is read. There
is no reverse compatibility. If you save the game after conversion, you
can't load the savefile on 3.4.0, only 3.4.1.
Provide user control over screen updating for multi-step movement
(run via shift, control, &c and also travel). [See cvs history for
fixes34.1 for more details.]
by <Someone>
(the following text accompanies the patch at <Someone>'s web page)
add more configurability to the new msg_window option of [..]3.4.0.
It allows the configuration option to take an optional parameter to
specify the style of message history display to use.
allows the following configuration options:
msg_window:s - single message (as was the default in 3.3.0)
msg_window:c - combination; two messages in 'single', then as 'full'
msg_window:f - full window; oldest message first
msg_window:r - full window reversed; newest message first
In the event of no parameter being provided,
the patch is compatible with the current 3.4.0 behaviour:
msg_window = 'full'
!msg_window = 'single'
msg_window can be configured for these options in the
Options menu (Shift-O)
msg_window stores the current window type in the non-persistent
iflags structure, which means that savefile/bones files should be
100% compatible with Vanilla, but at the disadvantage that your
customisations to msg_window will be replaced with your
defaults.nh (or ~/.nethackrc) value every time you restart a saved game.
Credits:
The patch draws inspiration (and code snippets) extensively
from <Someone>'s original msg_window patch, [...] as well as <Someone>'s code for reverse ordering implemented until recently in
Slash'em.
Add "travel" boolean option to enable/disable travel command.
Add "mouse_support" wincap option to enable/disable mouse.
- When running the win32 tty version full-screen, some people
complained about the square mouse cursor.
Newsgroups: rec.games.roguelike.nethack
Subject: Re: Getting rid of the cursor?
<email deleted> <email deleted>
Followup-To:
On Thu, 04 Apr 2002 00:20:06 <email deleted> wrote:
> Ok, let me be more specific: when playing the windows non-GUI version, is
> there a way to get rid of the large rectangular white cursor?
>
> <email deleted> wrote in message
> <email deleted>
>> Can you get rid of the cursor in the windows version? I really hate that
>> thing.
>>
<email deleted>
>Newsgroups: rec.games.roguelike.nethack
>Subject: Disabling Mouse Input
>
>I purchased an older P120 laptop to be able to play Nethack at the hotel.
>I find that I rest my thumbs on the mouse touch pad all too often and my
>@ moves unexpectedly at times. I took a peruse through defaults.nh, but
>came up empty.
>
>Anyone know if mouse input can be disabled?
>
>MRSisson
Replace "feature_toggle" implementation with an easier-to-understand
boolean option called "lootabc".
Provide "showrace", an option to display the hero by race glyph rather
than by role glyph.
Document the above.
Remove some obsolete Mac options.
- splash_screen (boolean for whether to display splash screen at startup)
- player_selection:dialog|prompts
Also moves the font and window manipulation stuff in defaults.nh
further down the file, so that a tty users doesn't have to wade
through it all to find the character adjustment samples.
Add option windowcolors to control foreground/background
color of menu, message, status, and text windows.
(foreground color is the text color).
The value of the colors is window port specific, the
core code handles the storing of the strings only.
- new iflags.vision_inited to determine if vision is ready to go.
- the flag is set the first time vision_reset() completes, actually every time
- vision_recalc() checks the flag before doing anything.
As Warwick suggested, instead of having fixed tile
sizes as options, allow specification of the size
explicitly.
Also, at Yitzhak's suggestion, provide a hook for
overriding the port's tile file name. That name,
and the contents of the file it points to, will
be window-port specific of course.
to allow common parsing in the core, and direct access to the
results by the window port.
Notes:
o Adds a new field, wincap, to the window_procs
structure for setting bits related to the preference
features that the window port supports. This allows
run-time determination of whether a particular option
setting is applicable to the running window port. A
window-port is free to support as many, or as few,
of the available options as it wants. Ensure that
only the ones supported have their corresponding bit
set in window_proc.wincap. [see chart in
doc/window.doc for help with that.]
o The settings I stuck into wincap for each window
port are almost certainly not accurate, so each port
team should review them. You should only include
the ones that you will actually react to and make
adjustments for if the user changes that option.
Without the setting in wincap, the option won't even
show up in the 'O'ptions menu.
o preference_update() added to the window-port
interface, so that the window-port can be notified
if an option of interest (an option with its
corresponding bit set in wincap field) is
changed.
o provided a genl_preference_update() routine in
windows.c and used it for all the existing
window ports since they don't have a functional
one of their own yet.
o this messes around heavily with iflags and the options
arrays in options.c
o I hope I didn't break any port's existing code. I
tried not to. The Mac however, in particular, should
be looked at because it suffered a namespace collision
with what I was working on around fontname. It had
Mac specific font stuff in options.c. Please test
the Mac.
>
> I'd like the default for "Would you like to see your <whatever>"
> at the end of a game to be "y" instead of "n". I haven't asked
> for full disclosure in order to have it skipped if I press the
> space bar once too often by mistake.
This changes the way the flags.end_disclose array is used to
allow what this request is asking for. It should be backward
compatible with previous "disclose" options.
The order that the end_disclore options are stored:
inventory, attribs, vanquished, genocided, conduct
There is an array in flags:
end_disclose[NUM_DISCLOSURE_OPT];
with option settings for the each of the following:
iagvc [see disclosure_options in decl.c]:
Legal setting values in that array are:
DISCLOSE_PROMPT_DEFAULT_YES ask with default answer yes
DISCLOSE_PROMPT_DEFAULT_NO ask with default answer no
DISCLOSE_YES_WITHOUT_PROMPT always disclose and don't ask
DISCLOSE_NO_WITHOUT_PROMPT never disclose and don't ask
Those setting values can be used in the option
string as a prefix to each disclosure option
to get the desired behaviour for that option.
For backward compatibility, no prefix is actually required,
and the presence of a i,a,g,v, or c without a prefix sets
the corresponding value to DISCLOSE_YES_WITHOUT_PROMPT;
The actual prefixes used are controlled by the following in flag.h:
#define DISCLOSE_PROMPT_DEFAULT_YES 'y'
#define DISCLOSE_PROMPT_DEFAULT_NO 'n'
#define DISCLOSE_YES_WITHOUT_PROMPT '+'
#define DISCLOSE_NO_WITHOUT_PROMPT '-'
As far as the docs go, I don't know if I've got the *roff
stuff right. The TeX stuff looks okay when I converted it to .pdf.
This increments EDITLEVEL. If that is a problem, I can
add a routine to restore.c to perform a conversion of the old
values in flags. Let me know.
