Add a #saveoptions extended command, to allow saving configuration
settings from within the game. This is still highly experimental,
and gives plenty of warnings before asking to overwrite the file.
Lack of option saving is one of the biggest complaints new players
have, so this should help with it. More experienced players with
highly customized config file should not use this feature, as it
completely rewrites the file, removing all comments and non-config
lines.
Reformat most of optlist.h. In the process, fix a couple of
conditionally included items which were mis-classified as set_in_game
when excluded. Add "permablind" as an alias for the "blind" option.
[I don't understand the size value of 70 for #if BACKWARD_COMPAT
{curses,DEC,IBM,Mac}_graphics but didn't alter that.]
Include 'pickup_types' in the behavior section; it's useful from
turn 1 and does get adjusted from time to time during play.
Include 'color' in the map section, but hide it for wc_tiled_map.
Include 'showscore' and 'statuslines=2|3' in the status section.
I didn't rebuild with SCORE_ON_BOTL enabled so the showscore part
hasn't been tested.
Make the default options menu only show the most important
options, split into categories. The full, traditional menu
can be accessed by using the m-prefix.
Issue reported by schauveau: when the command line specifies the
'--nethackrc=file' option (Unix, including linux and OSX, only) the
value of 'file' was set in pointer g.cmdline_rcfile and the options
parsing made a copy of that pointer rather than of what it pointed
to, then freed g.cmdline_rcfile before using the copy. So it ended
up using a pointer to freed memory.
Stick with copying the pointer but defer freeing the original until
after its copy is no longer needed.
Fixes#832
Change the inner workings of the experimental TTY_PERM_INVENT.
Switch to delivering the content to tty for the experimental perm_invent
via the existing window port interface (start_menu(), add_menu(), end_menu).
This also adds a new window port interface call ctrl_nhwindow() for
delivering information to the window port, and/or obtaining specific
information from the window port. The information and requests can
be extended as required. To be documented later once the changes settle
down.
Due to the intrusive nature of these changes and the possibility of
some bugs in the new code, I'm going to leave TTY_PERM_INVENT commented
out in the repository for a day or two. Anyone wishing to test it out
can do so by uncommenting TTY_PERM_INVENT in config.h.
Change the regex_error_desc() interface. Have the caller pass in
a pointer to a buffer of at least BUFSZ characters and have
regex_error_desc() populate that. No need for static buffers or
extra dynamic alloction.
Also, change it to never return Null. None of its callers were
checking for that and could have passed Null to config_error_add()
or raw_print(). printf("%s", NULL) produces "null" on OSX but other
systems would probably crash if a Null result ever actually occurred.
The error explanation returned by cppregex included a trailing period.
config_error_add() adds one, so the message ended up with two. Have
regex_error_desc() check for final period and strip it off if found.
(My test case used a menucolor pattern of "[" which triggers an error
about mismatched brackets.)
Reformat cppregex.cpp; treat 'extern "C" {' as if it isn't introducing
a nested block. Fix the '#include <hack.h>' that 'make depend' was
ignoring.
One of the drivers of this change was that screen coordinates require a
type that can hold values greater than 127. Parameters to the window
port routines require a large type in order to be able to have values
a fair bit larger than COLNO and ROWNO passed to them, particularly for
their use to the right of the map window.
This splits the uses of xchar into 3 different situations, and adjusts
their type and size:
xchar
|
-----------------------
| | |
coordxy xint16 xint8
coordxy: Actual x or y coordinates for various things (moved to 16-bits).
xint16: Same data size as coordxy, but for non-coordinate use (16-bits).
xint8: There are only a few use cases initially, where it was very
plain to see that the variable could remain as 8-bits, rather
than be bumped to 16-bits. There are probably more such cases
that could be changed after additional review.
Note: This first changed all xchar variables to coordxy. Some were
reviewed and got changed to xint16 or xint8 when it became apparent that
their usage was not for coordinates.
This increments EDITLEVEL in patchlevel.h
Add a non-string identifier to window_procs for use in runtime
identification of the current window port being used.
Use a macro WPID to add the identification at the top of the
various existing window_procs declarations. It expands to the
existing text string, as well as the newly added field wp_id
with a wp_ identifier.
For example, WPID(tty) expands to: "tty", wp_tty
The generated wp_tty must be present in the wp_ids enum at
the top of include/winprocs.h.
The WINDOWPORT(x) macro has been updated to expand to a simple
value comparison (port.wp_id == wp_x), instead of a
string comparison.
(user-side decisions really, but as it stands right now
user-side decisions/options are made and processed by the core)
add a parameter to add_menu so color can be passed
This starts the tty perm_invent just in time later in the
startup rather than initializing it with the other
game windows.
This also splits the duties:
The core will inquire from the window port about how many
inventory slots it can fill.
The core will handle figuring out the inventory text and
inventory letters, and will do the traversing of internal
data structures like obj chains, and passing customization
options on to the window port.
The window port will look after placing each inventory slot's
text at an appropriate location on the screen.
This, in theory, makes the core-portion available for
window ports other than tty to use, though none currently do.
The decision of what goes in an inventory slot is all left up
to the core with the update_invent_slot interface.
Documentation updates will come later, not at this time.
Modify the error message delivery when too-small so that it works for
both NETHACKOPTIONS or .nethackrc and for 'O'. "Early failure" isn't
very early; using pline() instead of raw_print() ends up writing to
the base window but also works normally when used for failed attempt
to set perm_invent with 'O'.
Fix the off by one error in height which required an extra line that
ended up going unused.
Fix an off by one error in the middle divider. Forcing the same item
from the left column to the right column, I was seeing
"f - an uncursed +0 pair of leather glove" ["s (being worn)" truncated]
"F - an uncursed +0 pair of leather gl"
After the fix I get
"f - an uncursed +0 pair of leather glov"
"F - an uncursed +0 pair of leather glo"
(When terminal width is even, the left side is one character wider
than the right.)
Split the invent window creation code out of tty_create_nhwwindow() to
new routine tty_create_invent(). I came across
if (r == 0 || (newwin->maxrow - 1)
in the process (note lack of 'r ==' in the second part). I'm not sure
what the initialization code is intended to accomplish but missing
that init for the bottom (boundary box) row didn't seem to be causing
any problem.
This forces the required size to be big enough to handle statuslines:3
regardless of what the setting for that is at the time the perm_invent
window is created. When the value is 2, there will be a blank line
between status and the boundary box of perm_invent. When it is 3, the
third line will use that line and the only separator will be the top
boundary box line. Toggling back and forth with 'O' works as expected.
I'm not sure what happened but something that worked when I tested
yesterday wouldn't work today. Have 'O' was pass TRUE rather than
FALSE to tty_perm_invent_toggled() when perm_invent is set to 'on'.
And skip that code for .nethackrc or NETHACKOPTIONS because it was
segfaulting.
Boolean switches: add an omitted 'break', plus a few 'default' cases
that would matter if someone turned on the warning about a switch
statement with 'enum' index that doesn't have cases for all possible
values of that enum. I haven't made any attempt to be exhaustive
about those; these few were just right in the same place.
The code for toggling perm_invent when windowtype=="tty" was inserted
into the middle of several switch cases that share 'need_redraw' so
was getting executed for various other options such as 'use_inverse'
that precede it in the list of cases. It was also continuing on to
general feedback for boolean options, reporting "'perm_invent option
toggled on" even if it failed and the option stayed off.
Add a rudimentary experimental always-up inventory display
capability to tty when the perm_invent option is in effect.
It requires an additional 28 rows available on the terminal
underneath the bottom status line.
It hasn't been optimized for performance as of yet.
Switch to using a macro invocation Verbos(n, s) in place of the
flags.verbose checks.
Provide the mechanics for individual suppression of any of the
existing messages that were considered verbose.
Mechanics only - this code update does not provide any means of
setting the suppression bits.
iflags.verbose = 0
is still a master suppression of all the verbose messages.
iflags.verbose = 1
turns on the verbose messages only for those whose suppression
bit is 0 (not set).
3.7 has a new size prefix for globs that 3.6 didn't. The code that
decides whether player is naming slime molds after an actual object
needs to know about it.
A new feature, enabled by default to maximize testing, but one which can
be disabled by commenting it out in config.h
With this, some additional information is added to the glyphmap entries
in a new optional substructure called u with these fields:
ucolor RGB color for use with truecolor terminals/platforms.
A ucolor value of zero means "not set." The actual
rgb value of 0 has the 0x1000000 bit set.
u256coloridx 256 color index value for use with 256 color
terminals, the closest color match to ucolor.
utf8str Custom representation via utf-8 string (can be null).
There is a new symset included in the symbols file, called enhanced1.
Some initial code has been added to parse individual
OPTIONS=glyph:glyphid/R-G-B entries in the config file.
The glyphid can, in theory, either be an individual glyph (G_* glyphid)
for a single glyph, or it can be an existing symbol S_ value
(monster, object, or cmap symbol) to store the custom representation for
all the glyphs that match that symbol.
Examples:
OPTIONS=glyph:G_fountain/U+03A8/0-150-255
(Your platform/terminal font needs to be able to include/display the
character, of course.)
The NetHack core code does parsing and storing the customized
entries, and adding them to the glyphmap data structure.
Any window port can utilize the additional information in the glyphinfo
that is passed to them, once code is added to do so.
Also, consolidate some symbol-related code into symbols.c, and remove it from
files.c and options.c
For char *next; don't compare (next = index(...)) != '\0'.
'\0' has value 0 and 0 used in a pointer context is a null pointer.
So the code worked as intended even though it wasn't written as
what was intended. Fix: take off the char decoration.
Implement 'untrap' as an 'autounlock' action. Quite a bit more work
than anticipated. The new documentation is rather clumsy; too many
if-this and if-not-that clauses have intruded.
I'll be astonished if all the return values are correct....
[A couple of places were checking for (rx != 0 && ry != 0) to decide
whether they were performating an autounlock action at <rx,ry> but
that erroneously excludes the top line of the map if the current
level extends that far. Just check rx for zero/non-zero.]
This gives the player more control over what autounlock does. It is
now a compound option rather than a boolean, and takes values of
autounlock:none
!autounlock or noautounlock (shortcuts for none)
autounlock:untrap + apply-key + kick + force (spaces are optional
or can be used instead of plus-signs, but can't mix "foo bar+quux")
autounlock (without a value, shortcut for autounlock:apply-key).
Default is autounlock:apply-key.
Untrap isn't implemented (feel free to jump in) so is suppressed from
the 'O' command's new sub-menu for autounlock. It's parsed and
accepted from .nethackrc but won't accomplish anything.
[Just musing: it should be feasible to kick in direction '.' to break
open a container or #force to an adjacent spot to break open a door.
If that was done, autounlock:kick+force (or more likely autounlock:
apply-key+kick+force when lacking a key) would resort to force if hero
couldn't kick due to wounded legs or riding.
This changes struct flags so increments EDITLEVEL again.
This includes pull requests #750 from entrez and #751 from FIQ but was
entered from scratch rather than using use their commits.
Closes#750Closes#751
mungspaces() returns its argument itself, so `newop` is assigned to `buf`, and always non-null.
`tfg` and `tbg` is assigned to (some addition of) `newop`, so these are also always non-null.
Hide 'altkeyhandling' from the 'O' menu for !WIN32 builds. If
present in run-time config file it will be parsed and then ignored.
Instead of showing "unknown" for the value of the 'hilite_status'
compound option, show "none" if there are no highlighting rules, or
a pointer to other option "status highlight rules" when there are.
Deal with a few function parameters that are used for some
combination of build-time config settings and unused for others.
Change 'O's sub-menu for selecting new msg_window option setting to
work similar to the one for menustyle: show a description of what
the values mean with a two-line, two-column menu entry. Also make
its current value be pre-selected.
msg_window is a bit more complicated than menustyle because only
some interfaces support it and curses only supports two of the four
choices. It currently has one hard-coded reference to "^P" (in the
tty-specific 'combination' choice). Changing that is feasible but
seems like more trouble than it'd be worth.
