This is the code I built trying to figure out the large window size issue.
It completely compiles out if not needed (see -DWINCHAIN in hints/macos10.7)
and except for one call during setup has zero overhead if compiled in and
not used. See window.doc for more info.
Defs for UNUSED parms. I know this has been controversial, so use is isolated
to the chain code and windows.c (where it shouldn't be intrusive and saves about
50 warnings).
Hints file for 10.7, but the build process still needs to be migrated from
the branch.
Pat noted that I neglected to drop the SCCS lines on the files I've been
committing, so clean up those and any others I could find where the SCCS
line date is out of date.
Conditional on H2344_BROKEN which can be disabled at the top of the file if
necessary. This appears to handle all the cases I was able to reproduce from
Pat's list, with the caveat that msg_window=f fails on very wide windows on
Mac OSX Lion with the default terminal emulation. When the emulation is set
to ANSI, it works (the failure mode is the output from a simple putchar() loop
across the contents of history called up from ^P wraps at about the middle
of the window).
Provide a mechanism for cleanly moving between tentative window system
selections during startup. Now, before a second (or later) system is selected,
the first will be notified that it is losing control. See window.doc.
Undo the win/tty/wintty.c bands of the H2344 fix until the fix is fixed. I
didn't take out the type changes to hopefully avoid putting people through
a full recompile.
The presence of conditional code for both UNICODE_WIDEWINPORT and
NEWAUTOCOMP in hooked_tty_getlin() was making it be pretty hard to read.
This simplifies the UNICODE_WIDEWINPORT parts similar to what was done in
topl.c a year or two back. The NEWAUTOCOMP parts are still cluttered.
This compiles successfully with UNICODE_WIDEWINPORT enabled but that
configuration is otherwise untested.
Tested on the unix port; I've updated as many other ports as I can figure
out but they're not tested. See window.doc for info on the changed banner
lines. Also adds the ability to override the generic "Unix" port - used now to get
"MacOSX" into the version line instead of "Unix" (so we don't scare people who don't
know what's going on).
Move the toptenwin option from flags to iflags to keep it out of
save files, thus preventing odd behavior from win32 (nethackW.exe) when
restoring and finishing games started and saved with tty (nethack.exe).
[See cvs log entry for flag.h for more complete explanation.]
Since the current suite is freely downloadable, remove the older VS files.
Committed on the Free edition of March Hare Software CVSNT Server.
Upgrade to CVS Suite for more features and support:
http://march-hare.com/cvsnt/
This is all tiny stuff - allow overriding WIDENED_PROTOTYPES from the hints
file, missing NO_SIGNAL conditionals, remove a GCC-ism, conditional indentation,
void return in a non-void function.
PORTS: Please make sure I've done the right thing for/to your code.
This patch adds a new winproc that lets the window port approve or cancel
the suspend request - this should take care of the Mac Qt lockup issue.
In addition, Unix suspend is restricted to accounts that can use the shell
if SYSCF is defined.
Will require additional work for 3.5 (shouldn't blindly remove perm_lock
without asking the user; update comments; add standard headers) but I don't
want to lose this code.
Hide most of the Unicode support in tty's top line manipulation.
The new code is somewhat fragile, but the clutter from the many instances
of #if UNICODE_WIDEWINPORT was making it difficult to work on some other
changes.
[Make use of recent message history changes.]
Add support to makedefs and the core for including a line of summary
text with quest messages that don't use pline() delivery. The multi-line
record structure of quest.txt begins each entry with %C and ends with %E.
makedefs now examines the %E lines looking for "[anything]" and adds that
to quest.dat where deliver_by_window() can find it. The square brackets
are required in the input and intentionally carried along to the output.
putmsghistory() is used to put the summary text into the message history
buffer for use by ^P, without being displayed first. (So this is a no-op
for interfaces which haven't implemented putmsghistory yet. Maybe
genl_putmsghistory() should pass such text to pline() as a quick hack?)
This adds a few summary lines to quest.txt so that the feature can
be tested. Most of them were written by <Someone> nearly three years
ago. I'm planning to add a couple of new control codes that'll allow some
of them to expand into shorter text. (The one where the Archeologist
leader tells you that the nemesis stole the artifact so your mission is
to find the goal level, defeat the nemesis, and return with the artifact
ends up being roughly 160 characters long.)
[Third of three message history patches.]
Add another argument to putmsghistory() so that it can tell whether
it's processing multiple messages for restore (which should be treated as
being older than any current messages) or a single message to stuff into
history (which should be treated as the most recent message even though
it hasn't been displayed in the message window).
tty's role confirmation menu was always showing "dwarven" as the
chosen race. I don't know how many times I saw it without ever realizing.
``races[FACE]'' in the code eventually stood out enough to be noticed. :-)
[See cvs log for src/role.c for a much longer description.]
When picking role, race, and so forth, new menu entries allow you to
pick any of the other items before the one currently being handled. After
picking all four of race, role, gender, and alignment (or if you answered
'y' to "shall I pick for you?"), there is a followup prompt to confirm the
choices. It's a menu which also provides a chance to rename the character.
This has only been implemented in win/tty's player_selection(), with
some support code in the core that might be useful to other interfaces.
And so far, the chance to rename is only presented as a menu choice if
you've given an answer to "who are you?" prompt earlier during startup.
Also, ports that use pcmain.c aren't able to perform hero renaming yet.
infrastructure for "system options" - things currently specified at build
time that should be changeable at install time or run time but not really
under user control
generalize contact info so it can be localized and it doesn't have to be
an email address
move recently introduced WIZARDS into sysopt
drop bogus OPTIONS=wizards possibility
new function build_english_list() to comma-ize and add 'or' from a whitespace separated list: A. A or B. A, B, or C.
syscf file now handles: WIZARDS SUPPORT RECOVER
SUPPORT specifies local support information
RECOVER will eventually supply port-specific and/or localized info on how
to run recover (or get it run for you).
Note: in sys/msdos I changed sys.o (generated from pcsys.c) to pcsys.o
Note: sys/msdos/Makefile.GCC has 2 rules for sys.o (now pcsys.o)
build system.
Anyone who wants to do a build from sys/unix and doesn't want to figure this
out just needs to do:
sh setup.sh hints/unix
instead of:
sh setup.sh
and then continue on as usual.
New files:
sys/unix/NewInstall.unx - the new directions
sys/unix/hints/* - the hints files. There will be more later.
sys/unix/mkmkfile.sh - helper for setup.sh
Summary of changes:
see NewInstall.unx for info on the new build system
introduction of various preprocessor symbols to turn options off that
are defaulted on historically
comment out nethackrc (and similar) entries that still use the old symbol
syntax.
commenting out of Makefile.* lines that now come from hints/unix
GAMEDIR is replaced with HACKDIR so the Makefiles and the C source agree.
Note that I have NOT changed the docs and/or Makefiles for be, msdos, os2,
vms, or winnt. If port maintainers don't then I will, but I can't test
those ports.
nethack.sh now handles the font path automatically
The hangup check added to xwaitforspace() (which gets tty user's
response to --More-- and "Press Return to continue: ") wouldn't be good
enough if hangup occurred while that routine's input loop was executing.
NOSAVEONHANGUP isn't documented anywhere. I don't see why it should
wipe out recoverable level files just because it doesn't want to build a
save file out of them during the hangup. Leave them intact if checkpoint
is active. If someone really wants to make them always go away, they'll
need to disable INSURANCE as well as enable NOSAVEONHANGUP.
tty's getret() -> xwaitforspace() could get stuck in a loop after
hangup, depending upon the state of terminal shutdown (accepting EOF or
ESC cares about cbreak mode?). Make xwaitforspace() become a no-op during
hangup processing.
vms's call to hangup() from an exit handler took place after the
terminal has been reset (the exit handler for the latter is registered
later so executes sooner). Then exit_nhwindows() resulted in a second tty
reset attempt and settty() -> setctty() encountered an error (which it
reported, triggeting a getret() call). Make the vms code correctly guard
against multiple resets.
A recent change to force gold in inventory (during multi-item Drop or
applying/looting containers) to have '$' for its inventory letter for the
!GOLDOBJ configuration has revealed a bug which 3.4.3 has for the GOLDOBJ
configuration. Specifying a count followed by '$' to use a subset of
carried gold didn't work under tty; the $ was treated as a group accelator
and overrode the count, so full stack was always used. (The code a few
lines above this which counts the occurrences of group accelators already
includes this same fix: ignore an item's group accelator when it matches
the selector.)
I wouldn't be surprised if other interfaces are subject to the same
problem; since I can't test those I'm not attempting to fix them blindly.
Typing a response at the "Who are you?" prompt didn't allow digits in
the character's name under Unix and VMS; something like "arc15" came out
as "arc__". This allows them to be used anywhere except for the first
character. "arc15" now works; "15arc" ends up as "_5arc" so that there
still won't be a leading digit abutting the uid value when they're joined
to form the save file name.
Move the code to use a nethack menu for restoring a saved game. It
was inline in tty_askname() but is now a separate routine, restore_menu()
in restore.c. There was no port-specific code and only a small amount of
tty-specific code; it should be useable by anyone (but Qt doesn't have to
switch over if it doesn't want to).
The original behaved strangely if there were exactly 26 saved chars;
the "start new game" menu entry ended up using "{" as selection character.
There wasn't any comparable problem at 52; it was limiting the menu to 51
games. Now it will allow 52 (with "start a new game" bumped into "#" if
there are that many), and adds an explicit quit entry (unless there are
52 or more games so that # is already used by new-game, then quit remains
implicit rather than resort to some other none-of-the-above character).
Explicitly truncate the query prompt string to QBUFSZ-1 characters.
For tty and Amiga, no longer include the choices and default within that
length limit; use a bigger buffer to hold them along with the prompt.
[See cvs log for doc/window.doc for more details.]
This patch attempts to add some levels of unicode support
to NetHack.
The master on/off switch for any Unicode support is
defining UNICODE_SUPPORT in config.h. Currently
there is code support for two subsets of unicode support:
UNICODE_DRAWING
If UNICODE_DRAWING is defined, then the data
structures used to house drawing symbols are expanded
to the size of wchar_t, big enough to hold unicode characters.
A typdef called `nhsym' is involved and if UNICODE_DRAWING
is defined, it is wchar_t, otherwise it is uchar.
UNICODE_WIDEWINPORT
If UNICODE_WIDEWINPORT is defined, then the data
structures inside the window port are expanded to the size of
wchar_t, big enough to hold unicode characters. Both map
symbols and text within the window port are expanded, in order
for potential support for displaying multinational characters some
day, but this patch only provides viewing of map symbols.
A typdef called `nhwchar' is involved and if UNICODE_WIDEWINPORT
is defined, it is wchar_t, otherwise it is char.
The only window port with code support for UNICODE_WIDEWINPORT
currently is the TTY port. Don't enable UNICODE_WIDEWINPORT
unless:
- it is a TTY port
- the underlying platform specific routines can
handle the larger data structures.
Don't enable UNICODE_SUPPORT unless:
- your compiler can handle wchar_t.
- your compiler can accept L'a' characters.
- your compiler can accept L"wide" strings.
Note that if your compiler can handle the above, you could
enable the larger data structures (currently if TTY) even if your
platform can't actually display unicode or UTF-8, by messing
with u_putch() in win/tty/wintty.c to only deal regular chars.
That should be the only function that actually pushes wide characters
out to the display.
If you enable UNICODE_SUPPORT, and your platform is capable
you will need to turn on the unicode run-time option to be able to
load unicode character sets from the symbol file, to be able to
push unicode characters to the display. You'll also want to load
a unicode symbol set once the unicode option is toggled on. In
a config file you would do that via these two lines:
OPTIONS=unicode
OPTIONS=symset:Unicode_non_US
The repository was stamped with NETHACK_PRE_UNICODE
prior to applying this patch, and stamped with
NETHACK_POST_UNICODE afterwards. The code differences
between those two tagged versions are this patch.
Add putmixed() to the window port. It allows map symbols to
be included in the string by encoding them in a unique fashion.
This was done because Unicode symbols, for instance, could be
longer than the size of a char.
The encoding of the map symbols in this patch is done by
prefixing a glyph value with \GXXXX, where XXXX is a
random value for the current game. The reason for the random
prefix is to minimize the possibility that a player can trigger
the escape sequence processing within text under their control
(dog names, etc.) the way they could if the sequence was fixed
in the source code. The random prefix remains the same throughout
the lifetime of a game because message window strings are
saved in the save file.
(There was actually a bug present because of the embedded
character even before the recent symbol changes, because if
someone was using a different set of characters between games,
the saved messages would reflect the original characters, rather
than the current. That bug was introduced with the ability to
save messages to the savefile.)
A window port does not have to supply an XXX_putmixed() routine,
it can use genl_putmixed() which uses the old behavior of
embedding the sequence as a character within the string
and calling putstr(). genl_putmixed() takes care of the decoding
of the escape sequence.
This also #ifdef's out code in pager.c for converting a glyph
to a character, and uses mapglyph() to do that instead. Does
anyone see a problem with doing that through mapglyph instead
of repeating similar code within pager.c?
Pat wrote:
> <Someone> has a patch (we've added a couple of
> his earlier ones) which changes the statue display from a single
> one size fits all "`" to a gray monster symbol instead.
> But I think the idea is a good one, and along with the
> bouldersym option could make the fairly hard to
> distinguish back-tick character go away.
Sources tagged before applying NETHACK_PRE_STATUE,
and afterwards with NETHACK_POST_STATUE for easy
rollback.
- reduce the number of symbol tables for each graphics
set {PRIMARY, ROGUESET} from three {map, oc, mon}
tables for each of the display symbols, the loadable symbols,
and the rogue symbols, to one continguous table for
each:
showsyms: the current display symbols
l_syms: the loaded, alterable symbols
r_syms: the rogue symbols
- Modify mapglyph so that the index into the symbolt table is
available as a return value (it was a void function), rather than
just the char converted from the glyph.
- That makes it possible for a window port to use the same
index value to extract from another table (perhaps a unicode
table) for a different set of display symbols. The index
is much more useful than trying to convert the character
into another type of symbol, as some contributed patches
have done.
- It is much easier to load a single alternative flat table to
make substitutions, since the corresponding value just
has to get placed into the same index offset in the
alternative table.
This also fixes a bug I found in botl.c, where you could
go to the rogue level, and the bottom line gold symbol
was not being updated with the new character as it should.
The reason was because the gold value had not changed,
only the field symbol used had changed.
This updates multiple ports to place a (void) cast on
the mapglyph call, now that it returns a value, so this
is going to generate a lot of diff e-mails.
