Text windows only accept a few keys (<escape>, <return>, ':', now
<space>) and if they got other keys they passed those up the call
chain, arriving at the map where they were treated as commands
and were executed while the text window was still displayed. The
cited example was ',' for pickup while the "things that are here"
popup was shown. The 'foreign' key's command might be executed
successfully but the undismissed popup could become hung.
This fixes that ('foreign' keys will be ignored). It also lets
<space> be used to dismiss text windows.
Slightly better but far from perfect: if you perform a search,
then after it runs you need to type <escape> once, or <return>
or <space> twice, or else search again and pick [done] on the
search popup and then <return> or <space> once, to dismiss a
text window via keyboard. (Prior to this, typing <escape> or
searching again and picking [done] followed by <return> were the
only ways.) Also, searching for an empty string will now be
treated as if [done] had been picked.
Fixes#400
I have to manually uncompress save files before running nethack
under gdb control or they can't be opened. Normally that works ok,
but if the 'selectsaved' option is enabled, the code to look up
character names from their save files was mangling the file names
when stripping off the non-existent compression suffix, so couldn't
open them.
Dipping a unicorn horn to transform a potion causes that potion
to be removed from and re-inserted into inventory. If the hero
was above 'pickup_burden' threshold prior to dipping and
removing the old potion brought encumbrance back under that,
attempting to add the new one back would drop it instead of
re-exceeding the threshold.
I noticed that the & command was claiming that ^A is an unknown
command. Unlike the old static version, or the replaced-before-
ever-released conditional version, the fully dynamic variation
of '&' didn't know about any of the special commands: prefix
letters, ESC, and ^A.
I can't take credit for this and still have no idea why it is
needed, but it fixes use of ^V as a command and as input to
to the regular version of yn_function(). In particular, '&'
command reports it as ^V. Unfortunately when 'popup_dialog' is
set, no control characters seem to be accepted by the part of
NetHackQtYnDialog(Exec+KeyPressEvent) responsible for arbitrary
input.
It also causes getlin() to terminate but I can't think of any
situation where ^V would be considered to be valid input for
getlin() so won't worry about that.
I put it in as '#if MACOSX' because I don't know whether any
other Qt platforms need it.
Document m\ and m`.
Several years ago there was a suggestion--aka complaint--that
"menustyle:Traditional was the only alternative for early versions"
was too vague and requested that the version be included. It was
probably accurate at the time it was included, but I've changed it
from "early versions" to "very early versions" now. :-}
Redo the fake ESC handling for curses' wgetnstr() so that it
applies to all popup prompts rather than just to "Who are you?",
in case the player sets the 'popup_dialog' option.
Move the check for monsters that want to stay away from hero
due to having a ranged attack into a separate function.
Add monsters with polearms and breath attacks to it.
Monsters with breath attacks stay away only if they haven't
used their breath recently, or if they are injured.
further adjustments to the window port interface to pass a pointer
to a glyph_info struct which describes not just the glyph number
itself, but also the ttychar, the color, the glyphflags, and the
symset index.
This affects two existing window port calls that get passed glyphs
and does the parameter consistently for both of them using the
glyph_info struct pointer:
print_glyph()
add_menu().
The recently added glyphmod parameter is now unnecessary and has been
removed.
Noticed when implementing restore-via-menu for curses a couple
of days ago: The "Who are you?" prompt wouldn't let me cancel
out via <escape>. I created a character named '\033' which was
displayed as "^[" during play and produced a save file shown by
'ls' as "501?.Z".
To fix this properly, we will need to replace use of wgetnstr()
with something of our own. That's more work than I feel like
tackling. This fakes ESC handling if the player is willing to
type <escape><return> rather than just <escape> when terminating
the prompt.
Update makdefs source and its man page.
Remove all mentions of the vision table files from:
o .gitattributes
o .gitignore
o Files
o Cross-compiling
Add a brief note in the fixes file.
Clone the tty SELECTSAVED code in curses. If you would be getting
the "who are you?" prompt (perhaps via 'nethack -u player') and
you have at least one save file, you'll get a menu of save files
(plus entries for 'new game' and 'quit') to choose from. Requires
'#define SELECTDSAVED' at build time (only ntconf.h does that by
default) and when present, can be disabled by setting 'selectsaved'
to False in NETHACKOPTIONS or .nethackrc.
Another one from several years ago. Document 'pickup_types:.'
as a way to set pickup_types to a value that won't ever cause
anything to be picked up, in order to leave all autopickup
decisions to player's autopickup exceptions.
Actually implementing pickup_types:none would require just as
much documentation plus extra code.
Reported by a beta tester four years ago: if you telepathically
observed a pet eat a mimic corpse and temporarily change shape,
you were told that you sensed it happening but the map continued
to show its true form (because telepathy overrides mimicking).
Attempting to force the map to show the alternate shape in that
situation was hopeless, so give an alternate message instead.
While trying to fix this, I noticed my dog mimicking a throne
several times. The list of alternate shapes for quickmimic
included SINK which happens to have the same value as S_throne.
Change that to S_sink.
Being able to swap places with peaceful monsters instead of just
with pets made it possible to cause them to flee. Shopkeepers
wouldn't abandon the shop door but temple priests would attack
if hero tried to chat while they were fleeing.
The block of sanity check code that is causing impossible warnings
about the Wizard mimicking a monster was initially only used for
furniture and objects specifically because of the Wizard. When it
got extended to check for mimicking monsters, an exception for the
Wizard was needed but not added.
Fixes#432
ensure that monster female name variation ends up as a female during ^G
arbitrate when there is a conflict between gender term (male or female) and
a gender-tied monster name (cavewoman) during ^G; gender term wins
From the pull request author NullCGT:
This pull request is a response to 0c3b964, in which nhmall expressed interest in contributions that would make gendered tiles visually distinguishable from one another. Since I've spent way too many hours editing NetHack's default tileset and the thought of trying to merge this commit into my variant gives me an absurdly massive headache, I thought I would have a go at it!
Making tiles of different genders distinct in NetHack presents an interesting problem. While it would be fun to create highly distinct tiles for every gender, doing so would reduce the accessibility of the game, since players would have to remember many more tiles, and might end up confusing one monster for another. Visual clarity is key.
Therefore, I had the following goals when creating this pull request:
1. If there is an interesting way to differentiate tiles by gender, do so.
2. Any sort of differentiation should be minor enough that a user can still tell what a monster is at a glance. Essentially, visual clarity comes before differentiation by gender.
3. Try to use a "TDTTOE method" of differentiating tiles. For example, female cats are more colorful than males, because generally male cats have only two colors of fur. Basically, I spent a lot of time on wikipedia researching sex characteristics of different species.
4. Try not to fall into "female = longer hair / eyelashes." While this feature will unfortunately require some gender-essentialist visual shorthand, this tropes is overdone and exhausting.
Please let me know what you think; I'm totally open to feedback on all of this and happy to make modifications. I've attached the resulting tiles file to this post in png form.
The alterations made in this pull request are as follows:
- Female ants are slightly larger than male ants, just like in real life. I could have added wings to the male ants, but I felt that doing so would lead to some confusion.
- Female wolves are slightly smaller than male wolves. There wasn't a great way to show this without making winter wolves look very similar to winter wolf cubs, so I just made the female wolves tails slightly shorter.
- Calico cats are almost exclusively female, so I turned the female cats into calico cats. The other piece of logic behind this choice was that players will probably really enjoy seeing different variants of their pets.
- Female hobbits, minotaurs, humans, werecreatures, and aleaxes wear slightly different clothing.
- Dwarfs are not differentiated in any way whatsoever. According to Terry Pratchett (in Unseen Academicals, if I remember correctly) it is almost impossible to tell what gender a dwarf is, even for fellow dwarfs. I strongly believe that NetHack should follow this tradition.
- Female leprechauns, archons, frost giants, guards, and all types of gnomes are clean-shaven. Although of course not one hundred percent accurate, it's convenient visual shorthand.
- Centaur tiles have no differentiation because the different types of centaurs are already extremely difficult to tell apart from one another.
- Female ogre tyrants and elven monarchs have slightly different crowns.
- Female quantum mechanics have a different hairstyle and no beard. Genetic engineers look the same, because the genetic engineer tile is perfect.
- Female barrow wights look like old grandmothers with flyaway hair. I kept the hair color the same and used a similar quantity of pixels so that they look similar enough to the males that you can tell they are barrow wights.
- Female archeologist tile is a reference to a certain archeologist known for raiding tombs.
remove unintentionally left M2_MALE flag on dwarf lord/lady/leader
provide a way to verify gender information relayed from the core
in debug mode on tty via #wizmgender debugging extended command
add MALE, FEMALE, and gender-neutral names for individual monster species
to the mons array. The gender-neutral name (NEUTRAL) is mandatory, the
MALE and FEMALE versions are not.
replace code uses of the mname field of permonst with one of the three
potentially-available gender-specific names.
consolidate some separate mons entries that differed only by species into a
single mons entry (caveman, cavewoman and priest,priestess etc.)
consolidate several "* lord" and "* queen/* king" monst entries into
their single species, and allow both genders on some where it makes some
sense (there is probably more work and cleanup to come out of this at some
point, and the chosen gender-neutral name variations are not cast in stone
if someone has better suggestions).
related function or macro additions:
pmname(pm, gender) to get the gender variation of the permonst name. It
guards against monsters that haven't got anything except NEUTRAL naming
and falls back to the NEUTRAL version if FEMALE and MALE versions are
missing.
Ugender to obtain the current hero gender.
Mgender(mtmp) to obtain the gender of a monster
While the code can safely refer directly to pmnames[NEUTRAL] safely in the
code because it always exists, the other two (pmnames[MALE] and
pmnames[FEMALE] may not exist so use:
pmname(ptr, gidx)
where -ptr is a permonst *
-gidx is an index into the pmnames array field of the
permonst struct
pmname() checks for a valid index and checks for null-pointers for
pmnames[MALE] and pmnames[FEMALE], and will fall back to pmnames[NEUTRAL] if
the pointer requested if the requested variation is unavailable, or if the
gidx is out-of-range.
Allow code to specify makemon flags to request female or male (via MM_MALE
and MM_FEMALE flags respectively)to makedefs, since the species alone doesn't
distinguish male/female anymore. Specifying MM_MALE or MM_FEMALE won't
override the pm M2_MALE and M2_FEMALE flags on a mons[] entry.
male and female tiles have been added to win/share/monsters.txt.
The majority are duplicated placeholders except for those that were
separate mons entries before. Perhaps someone will contribute artwork in the
future to make the male and female variations visually distinguishable.
tilemapping via has the MALE tile indexes in the glyph2tile[]
array produced at build time. If a window port has information that the
FEMALE tile is required, it just has to increment the index returned
from the glyph2tile[] array by 1.
statues already preserved gender of the monster through STATUE_FEMALE
and STATUE_MALE, so ensure that pmnames takes that into consideration.
I expect some refinement will be required after broad play-testing puts it to
the test.
consolidate caveman,cavewoman and priest,priestess monst.c entries etc
This commit will require a bump of editlevel in patchlevel.h because it alters
the index numbers of the monsters due to the consolidation of some. Those
index numbers are saved in some other structures, even though the mons[] array
itself is not part of the savefile.
Window Port Interface Change
Also add a parameter to print_glyph to convey additional information beyond
the glyph to the window ports. Every single window port was calling back to
mapglyph for the information anyway, so just included it in the interface and
produce the information right in the display core.
The mapglyph() function uses will be eliminated, although there are still some
in the code yet to be dealt with.
win32, tty, x11, Qt, msdos window ports have all had adjustments done to
utilize the new parameter instead of calling mapglyph, but some of those
window ports have not been thoroughly tested since the changes.
Interface change additional info:
print_glyph(window, x, y, glyph, bkglyph, *glyphmod)
-- Print the glyph at (x,y) on the given window. Glyphs are
integers at the interface, mapped to whatever the window-
port wants (symbol, font, color, attributes, ...there's
a 1-1 map between glyphs and distinct things on the map).
-- bkglyph is a background glyph for potential use by some
graphical or tiled environments to allow the depiction
to fall against a background consistent with the grid
around x,y. If bkglyph is NO_GLYPH, then the parameter
should be ignored (do nothing with it).
-- glyphmod provides extended information about the glyph
that window ports can use to enhance the display in
various ways.
unsigned int glyphmod[NUM_GLYPHMOD]
where:
glyphmod[GM_TTYCHAR] is the text characters associated
with the original NetHack display.
glyphmod[GM_FLAGS] are the special flags that denote
additional information that window
ports can use.
glyphmod[GM_COLOR] is the text character
color associated with the original
NetHack display.
Support for including the glyphmod info in the display glyph buffer
alongside the glyph itself was added and is the default operation.
That can be turned off by defining UNBUFFERED_GLYPHMOD at compile time.
With UNBUFFERED_GLYPHMOD operation, a call will be placed to map_glyphmod()
immediately prior to every print_glyph() call.
Binding 'repeat' (DOAGAIN, or redo) to a different key than ^A
didn't work as intended because the code that used it was
checking for DOAGAIN (a key value from config.h) instead of
g.Cmd.spkeys[NHKF_DOAGAIN] (the key currently bound to repeat).
Contrary to the github issue, re-bound prefix keys worked ok for
me if followed by a direction. However, they behaved strangely
if followed by anything else. If the keystroke was stolen from
some other command and that command hadn't been bound to another
key, following the prefix with a non-direction could end up
executing the command that used to own the key. For example,
BIND=d:nopickup
to use 'd' to move without auto-pickup would work if you used
d<direction> but if you used d<something-else> if would execute
the drop command.
The NHKF_REQMENU prefix could be bound to some key other than
'm' but it only worked as intended if the new key was a movement
prefix.
This also makes DOAGAIN be unconditional. If it is deleted or
commented out in config.h, the default binding will be '\000' so
unusable (freeing up ^A for something), but still be available
to be bound to some key (perhaps even ^A).
This also includes an unrelated change to mdlib.c. The comments
added to config.h will force a full rebuild. Changing mdlib.c
now rather than separately will avoid forcing that twice.
Fixes#426
The change to make mail objects and monsters separate from mail
delivery (so that toggling the latter wouldn't invalidate save
and bones files) made it possible to wish for scrolls of mail,
find such in bones left by someone who did, or write such via
magic marker. That was probably unintentional but I've left it
as-is. The problem was that reading such scrolls issued a
warning: "What weird effect is this?" because reading scrolls
of mail was only allowed when interacting with MAIL was enabled.
The issue suggested replacing #if MAIL with #if MAIL_STRUCTURES
in seffects(), and then insert #if MAIL in the part of reading
that deals with 'real' (or randomly faked for micros) mail. I've
done both of those, and also added a couple of message variations
for the unreal cases.
Closes#427
For farlook description of a monster, and for "killed by monster"
when game ends, include an indication of the monster's health:
uninjured full health
barely wounded 95%+ health
slightly wounded 80%+
wounded 20%..80%
heavily wounded 20%-
nearly deceased 5%-, or 1HP for really weak monsters
These descriptions and the criteria for choosing which one will
probably need some tuning.
Messages referring to the monster, including combat, do not
include the extra verbosity.
This got out of hand pretty quickly. can_reach_floor() had
different criteria than trap activation. Objects dropped at a
hole locations that don't fall through were treated as if they
were at the bottom of an abyss, so couldn't be examined or
picked up.
This a bunch of changes; it is bound to introduce some new bugs.
Turns out it was nearly as simple as I originally thought.
I just missed one significant detail the first time around.
This leaves DYNAMIC_STATUSLINES as conditionl but now enables
it by default. Using 'O' to change 'statuslines' from 2 to 3
or vice versa now works for Qt as well as for curses and tty.
Cap overall AC at -99 instead of -128. Put the same limit of 99
on enchantment and charge count of individual objects.
^X now reports if/when AC has reached its limit since players
could see that reaching that limit and then enchanting worn items
will change the worn items but not the total. (Same thing would
have happened with -128, just without any explanation and less
likely to accomplish.)
Won't affect normal play for any reasonable definition of normal.
The pull request changed \ and ` output to unconditionally show
discoveries in alphabetical order. That's nearly useless except
when looking at prediscovered weapons and armor that fighter
types start out knowing.
This allows the player to choose sorting order via the new
'sortdiscoveries' option. In addition to setting it via
config file or 'O', it can be set via 'm' prefix for \ and `.
Choices are:
o - sort by class, by order of discovery in class (default);
s - sort by 'sortloot' classification which groups sub-class
items (so all helmets before any other armor, then all
gloves, then boots, and so on); within each sub-class, or
whole class for classes which don't subdivide so usefully,
partly-discovered types (where a name has been assigned)
come before fully ID'd types;
c - sort by class, alphabetically within class;
a - sort alphabetically across all classes.
Turned out to be a large amount of work for fairly little gain,
although I suspect that 'sortdiscoveries:s' will eventually be
more popular than the default.
Invalidates existing save files so that current sort setting can
persist across save/restore cycles.
Closes#334
Don't let hero at water or lava location swap places with a
pet that can't survive there. This was a regression to 3.4.3
behavior introduced when displacer beast monster was added.
I can't remember whether the regression was intentional at the
time, but guess not because I'm fairly sure that I would have
included a comment about it.
Add some more checks to sanity_check_single_mon(). If mon->data
is discovered to be bad, panic instead of just issuing a warning
since a subsequent crash would be inevitable. Make sure hidden
ceiling hiders have a ceiling to hide at (so not on the planes of
air or water; some quest levels should probably be classified as
"no ceiling" but currently aren't). Perform a few mimic checks.
Protection from shape changers had a couple of minor bugs. A mimic
hidden at a spot the hero couldn't see would be allowed to remain
hidden (and stay that way once within view because protection from
shape changers isn't re-checked during ordinary activity). Also,
if a pet was shape-changed while eating a mimic corpse at the time
protection from shape changers started, it would fall into untimed
sleep as part of being forced back to normal shape [rescham()] if
its location could be seen.
Hidden tail segment was taken off the map as intended but the
check and warning in place_wormtail_randonly() didn't expect
to see that. A post-3.6 issue.
Also fix the spelling error in the warning message.
'? i' shows three keyless commands in the General section. This
makes M-X the key for #exploremode. #herecmdmenu and #therecmdmenu
are still keyless but now autocomplete.
A ridiculous amount of documentation for a three line code change.
