mons[].difficulty takes over for monstr[]
Invoking "makedefs -m" gives a deprecation message; it is also included
in the (now mostly empty) monstr.c.
Ports should now remove "makedefs -m" from their build procedures but this
commit does not include that change.
Change the extended command section from a mixture of
|#cmd This is a short-named command.
|#command
| This is a long-named command.
to every command having its descriptive text start on the next line
|#cmd
| This is a short-named command.
|#command
| This is a long-named command.
which results in a longer document but the extended commands section
is much easier to read.
No change to Guidebook.txt, where the previous command name padding
was wide enough to accomplish the same for fixed-width tty font.
There is an update to that though; a previous change omitted it.
This started out as some formatting cleanup for src/windows.c but
ended up removing calloc() from the WINCHAIN code, plus fixing a
couple of compiler complaints for win/chain/wc_trace.c.
I tried to actually run with +trace enabled and never managed to
get anything to happen. trace_procs_init() was never called. I've
never tried to use it before so don't know whether something which
used to work has gotten broken or I'm just doing it wrong.
Fixes#94
I thought maintenance of this was going to be automated?
Add missing special levels: bigroom6..10.lev and medusa3..4.lev
in the generated at build time section of dat/.
Fixes#38
In 3.6.1, some code in mfind0(detect.c) was mis-indented in a way
which suggested that the grouping within braces might not be what was
intended, and that was right--there was a pair of braces missing when
compared with older versions of the code involved. A previous patch
(post-#38) had changed the indentation to match the surrounding braces
without really addressing the issue. But it turned out not to make
any difference either way since mundetected is only used by hiders
and eels. This reorganizes the relevant code to make it simpler to
understand, I hope.
Change instances of 'C' and ``C'' to `C'.
Change a few double quotes, "..." to ``...''.
Remove some trailing spaces (for Guidebook.mn too).
One tweak in wording: for #offer, ``use `m' to skip items on altar''
followed by ``you'll need to find an altar'' sounded strange. Move the
``skip items on altar'' sentence after the ``need an altar'' sentence.
Apparently this doesn't work, for some reason every widget reports
a different window, even when they are in the same window ...
Maybe widgets inside and outside a viewport are technically
in different windows?
Replace `C' and 'C' with \(oqC\(cq (open and close single quote).
For plain text output, the new form generates the first form. Most
single quotes were using that, but there was quite a bit of C-style
char quoting that was somewhat inconsisent.
There are several text changes too, mostly small. The few I can
remember are
replacing several ``#twoweapon'' with `X';
pets: change 'cat' to 'kitten' and mention that horses are
vegetartian where it claims that pets usually feed themselves;
NETHACKOPTIONS: add `bash' to the shells mentioned,
describe `NETHACKOPTIONS=@filename' better,
shorten the example (it's still too long for Guidebook.txt);
Configuring Status Hilites: expand the `behavior' descriptions
to mention the value limits for percentage and absolute, and
include post-3.6.1 '<=' and '>=' for them,
add omitted fields `hunger' and `title' to text match.
I also changed a bunch of examples in the option configuation section
from bold font to constant-width Roman which more closely resembles
the \tt font in TeX. Probably a whole bunch of other bold items
ought to follow suit.
Issues:
title for section 9.3 (NETHACKOPTIONS) is too close to the sample
config file at the end of section 9.2;
as mentioned above, the sample ``setenv NETHACKOPTIONS foo'' is
much too long for Guidebook.txt, and ``NETHACKOPTIONS=foo'' is
slightly too long; they're ok in Guidebook.ps (assuming default
page size);
does `WIZKIT=~/wizkit.txt' actually work? That's the example shown.
I started out updating Guidebook.mn to use \(oq and \(cq for single
quotes but ended up including some new text. I've separated that
part out (there are a few instances of altered quoting in the midst
of it--the separation wasn't 100%) to commit separately.
Add verbiage to "choosing race" and several commands: f, s, S, t,
w, and ^X.
Change `E-' and `w-' to use minus sign instead of hyphen. The TeX
edition uses \tt font for those which has the same effect of making
those dashes be more prominent.
Fix typo/thinko in `IX': Guidebook.mn and Guidebook.txt said that
displayed inventory items whose bless/curse state is "known".
Guidebook.tex had it right, "unknown".
The core wants to reuse the permanent inventory window for choosing
an object from inventory, but the perm_invent window could be
hard to focus - it could even be on another display!
Instead, create a temporary new window from which the user can
pick an inventory item.
Dead hero's map coordinates are set to <0,0> part way through bones
creation, then were being used to record grave location for overview
feedback with "final resting place for <dead hero>" if/when another
character got those bones and found the grave (actually, spotted the
location where first hero died regardless of whether a grave gets
placed there). Record dead hero's pre-<0,0> coordinates as intended.
Not previously noticed because in wizard mode the final resting place
becomes part of overview info as soon as bones are loaded rather than
waiting for the death location to be reached.
Putting a box around the simulated screenshot has a side-effect of
forcing it to the next page if there isn't room on the current page.
And it looks at least as good as the old top and bottom horizontal
lines, if not better. This also eliminates the blank left-most
column (relative to those lines) which isn't part of the screenshot.
There are issues:
1) for Guidebook.ps, the "Figure 1" label underneath seems to be
too close to the box; I didn't try to force a blank line in front
of it because that increases the risk of pushing it to the next
page if the figure lands at the bottom;
2) for Guidebook.txt, the "Figure 1" label actually overwrites the
bottom line of the box, and the embedded space allows the line
to show through: "---Figure-1---"; I tried using "\ Figure\ 1\ "
to see if that might hide the issue by making it seem that the
label in intended to be on that line, but it didn't help--
unbreakable-space evidently does not imply always-visible-space;
3) the box is one column wider than the rest of the document (the
previous horizontal lines were two or three columns wider, so
this is actually a tiny imrovement); squeezing out some whitespace
to make the status lines narrower didn't help--or at least not
enough; squeezing some spaces was needed to match STATUS_HILITES-
era status formatting anyway.
4] if there was a footnote (we have some for trademarks) on the same
page as the screenshot, either the footnote or the table would
probably become confused, perhaps both. I think we just pretend
that that will never come up....
5} I've made no attempt to alter Guidebook.tex to try to match.
I'm throwing in the towel. Fixing this up is way beyond my limited
'roff/tbl capability. (There's probably a much more straightforward
way to achieve what we want.)
I may not get around to doing anything with 'C' vs `C' vs \(oqC\(cq
for a while. Bring Guidebook.txt up to date now rather than waiting
so that the repository's copy reflects the #H7444 fix.
This has ended up with substantial spurious differences due to it
placing padding in different spots during line justification. I
hope that's due to different groff version using a slightly different
algorithm rather than something like phase of the moon. :-]
There also differences caused by "..." taking less space than ``...''.
Reported for Windows beta3 but turns out to be present in 3.6.1
distribution.
| #wait
| Rest one move while doing nothing. Default key is '.', and '
| ' if rest_on_space is on.
where the line split occurs in the middle of "' '". We should
switch from the ascii single quote to the 'nroff open and close
single quote escapes but I haven't gotten around to that.
Preceding the space with backslash prevents a line break there.
Replace ``foo'' with \(lqfoo\(rq (many instances) so that the
plain text Guidebook will use ". Also a few `bar' with \(lqbar\(rq
(mostly `#enhance' and `#twoweapon') to be consistent with other
command names that all use double quotes. And replace a few strings
in actual double quotes with corresponding \(lq or \(rq.
Replace command descriptions using ^X with \(haX to get the larger
circumflex character (aka 'hat') instead of the smaller circumflex
punctuation. (Not noticeable with plain text output.)
Changed one DOS and a few MSDOS to MS-DOS to match the spelling in
the trademark line at the end.
Start each sentence on its own line for the paragraphs which were
being subjected to the above changes.
Also a much smaller subset for Guidebook.tex (not tested...).
Does not address the "wrapped to next line in middle of ' '" issue.
Fixes#144
While giving a new character his/her starting equipment, don't clear
alternate weapon when putting on a shield since that weapon should
still be available to swap with primary. Affected knight's lance
and valkyrie's dagger.
Also, guard against wearing an initial shield if already wielding a
two-handed weapon, or wielding such a weapon if already wearing a
shield. Both situations are hypothetical with current starting gear.
\#H7448 - option 'dark_room' showed incorrect default value.
\#H7446 - persistence of objects section was missing a word in
its second paragraph.
Also, fix up some clumsy wording in the first paragraph of that
same section.
Don't "feel like a hypocrite" when on Elberth and attacking a monster
which isn't scared by Elbereth (exception: peaceful creatures aren't
scared but attacking them in such situation is hypocritical anyway).
This means that players can use Elbereth to scare away some creatures
while continuing to fight others. Elbereth won't be automatically
erased, but weapon attacks will scuff the engraving; wand zaps don't.
Reduce the -5 alignment penalty when alignment is 5 or less. Reduced
amount is -(1..5), so -3 average.
BUG REPORT:
comments:
1. I start a new character.
2. The first command I type is '&'
3. I type "?" and "<enter key>" at the prompt.
4. Cannot open "keyhelp" data file!--More--
? give a help message.
1559
Replace the XawList with our own lists of labels and command widgets
to allow for menucolors. Supports only inverse line attribute for now.
Allow key translations to work with menus on Linux.
