Post-3.6 change to monster inventory handling could result in hero
remaining mounted on an unsaddled steed (if saddle was removed via
opening magic).
Hero falling out of saddle would fall to the ground and take damage
even if levitating or flying without steed's help after dismount.
Fixes#470
The code for doing this (basically an obj_extract_self() call plus
handling if the object was worn or wielded) was duplicated all over, and
inconsistent - for instance, though all of them updated the monster's
misc_worn_check to indicate it was no longer wearing something in
whatever slot, only one call also set the bit that flags the monster to
consider putting on other gear afterwards.
Under a new function, extract_from_minvent, all this extra handling is
checked in one function, which can simply replace the obj_extract_self
call.
A few callers (such as stealing) have some common code *after* the
object is extracted and some other things happen such as message
printing, such as calling mselftouch if the object was worn
gloves. extract_from_minvent does not handle these cases.
add MALE, FEMALE, and gender-neutral names for individual monster species
to the mons array. The gender-neutral name (NEUTRAL) is mandatory, the
MALE and FEMALE versions are not.
replace code uses of the mname field of permonst with one of the three
potentially-available gender-specific names.
consolidate some separate mons entries that differed only by species into a
single mons entry (caveman, cavewoman and priest,priestess etc.)
consolidate several "* lord" and "* queen/* king" monst entries into
their single species, and allow both genders on some where it makes some
sense (there is probably more work and cleanup to come out of this at some
point, and the chosen gender-neutral name variations are not cast in stone
if someone has better suggestions).
related function or macro additions:
pmname(pm, gender) to get the gender variation of the permonst name. It
guards against monsters that haven't got anything except NEUTRAL naming
and falls back to the NEUTRAL version if FEMALE and MALE versions are
missing.
Ugender to obtain the current hero gender.
Mgender(mtmp) to obtain the gender of a monster
While the code can safely refer directly to pmnames[NEUTRAL] safely in the
code because it always exists, the other two (pmnames[MALE] and
pmnames[FEMALE] may not exist so use:
pmname(ptr, gidx)
where -ptr is a permonst *
-gidx is an index into the pmnames array field of the
permonst struct
pmname() checks for a valid index and checks for null-pointers for
pmnames[MALE] and pmnames[FEMALE], and will fall back to pmnames[NEUTRAL] if
the pointer requested if the requested variation is unavailable, or if the
gidx is out-of-range.
Allow code to specify makemon flags to request female or male (via MM_MALE
and MM_FEMALE flags respectively)to makedefs, since the species alone doesn't
distinguish male/female anymore. Specifying MM_MALE or MM_FEMALE won't
override the pm M2_MALE and M2_FEMALE flags on a mons[] entry.
male and female tiles have been added to win/share/monsters.txt.
The majority are duplicated placeholders except for those that were
separate mons entries before. Perhaps someone will contribute artwork in the
future to make the male and female variations visually distinguishable.
tilemapping via has the MALE tile indexes in the glyph2tile[]
array produced at build time. If a window port has information that the
FEMALE tile is required, it just has to increment the index returned
from the glyph2tile[] array by 1.
statues already preserved gender of the monster through STATUE_FEMALE
and STATUE_MALE, so ensure that pmnames takes that into consideration.
I expect some refinement will be required after broad play-testing puts it to
the test.
consolidate caveman,cavewoman and priest,priestess monst.c entries etc
This commit will require a bump of editlevel in patchlevel.h because it alters
the index numbers of the monsters due to the consolidation of some. Those
index numbers are saved in some other structures, even though the mons[] array
itself is not part of the savefile.
Window Port Interface Change
Also add a parameter to print_glyph to convey additional information beyond
the glyph to the window ports. Every single window port was calling back to
mapglyph for the information anyway, so just included it in the interface and
produce the information right in the display core.
The mapglyph() function uses will be eliminated, although there are still some
in the code yet to be dealt with.
win32, tty, x11, Qt, msdos window ports have all had adjustments done to
utilize the new parameter instead of calling mapglyph, but some of those
window ports have not been thoroughly tested since the changes.
Interface change additional info:
print_glyph(window, x, y, glyph, bkglyph, *glyphmod)
-- Print the glyph at (x,y) on the given window. Glyphs are
integers at the interface, mapped to whatever the window-
port wants (symbol, font, color, attributes, ...there's
a 1-1 map between glyphs and distinct things on the map).
-- bkglyph is a background glyph for potential use by some
graphical or tiled environments to allow the depiction
to fall against a background consistent with the grid
around x,y. If bkglyph is NO_GLYPH, then the parameter
should be ignored (do nothing with it).
-- glyphmod provides extended information about the glyph
that window ports can use to enhance the display in
various ways.
unsigned int glyphmod[NUM_GLYPHMOD]
where:
glyphmod[GM_TTYCHAR] is the text characters associated
with the original NetHack display.
glyphmod[GM_FLAGS] are the special flags that denote
additional information that window
ports can use.
glyphmod[GM_COLOR] is the text character
color associated with the original
NetHack display.
Support for including the glyphmod info in the display glyph buffer
alongside the glyph itself was added and is the default operation.
That can be turned off by defining UNBUFFERED_GLYPHMOD at compile time.
With UNBUFFERED_GLYPHMOD operation, a call will be placed to map_glyphmod()
immediately prior to every print_glyph() call.
Cap overall AC at -99 instead of -128. Put the same limit of 99
on enchantment and charge count of individual objects.
^X now reports if/when AC has reached its limit since players
could see that reaching that limit and then enchanting worn items
will change the worn items but not the total. (Same thing would
have happened with -128, just without any explanation and less
likely to accomplish.)
Won't affect normal play for any reasonable definition of normal.
I started activating new program_state.saving and discovered that
saving of ball and chain could access freed memory. The change
for the former and fix for the latter are mixed together here (but
easily distinguishable).
The saving flag inhibits status updating and perm_invent updating,
also map updating that goes through flush_screen(). That should
fix the exception triggered after an impossible warning was issued
during a save operation. impossible() goes through pline() which
tries to bring the screen up to date before issuing a message.
During save, data for that update can be in an inconsistent state.
The code to save ball and/or chain when not on floor or in invent
(I think swallowed is the only expected case) was examining the
memory pointed to by uball and uchain even if saving the level had
just freed floor objects and saving invent had just freed carried
objects. So for the usual cases, stale pointer values for uball
and uchain would be present and checking their obj->where field
was not reliable.
If hero is a monk who is wearing a suit, have ^X mention the to-hit
penalty for that in the status section even though it isn't a normal
status line item. Combat feedback makes it annoyingly obvious, but
player might forget if MSGTYPE=hide is used to suppress the "Your
armor is rather cumbersome..." message.
We haven't added any new objects or monsters in a really long time.
This adds two new useful amulets, putting more pressure on the
decision over which type of amulet to wear.
amulet of flying: idea from slash'em, implemented from scratch.
Should be self-explanatory. Polymorphing into a form capable of
eating amulets and then eating one does not confer intrinsic
flight. (I've no idea how slash'em behaves is in that regard.)
amulet of guarding: adds +2 AC, which is fairly negligible, also
+2 MC, which is not. Initially called amulet of protection but MC
of 2 is referred to as 'guarded' by enlightenment so I changed it.
(By that reasoning, rings of protection ought to be called rings of
warding; oh, well.) Successfully eating one confers +2 AC without
any MC benefit. When wearing one of these, rings of protection
only confer AC, their +1 MC gets superseded rather than combined.
Monsters will wear an amulet of guarding and gain both the AC and
MC benefit, but if not cursed and they acquire one of life-saving or
reflection, they'll swap. They won't wear an amulet of flying.
I cloned two extra copies of the tile for one of the existing amulets
and ran sys/share/objects.txt through renumtiles.pl. The result
appears to be ok but on X11 the tiles map ends up looking psychedelic
so something beyond the tile art itself needs to be fixed here.
Fixes#177
The monst struct has 'mintrinsics' field which attempts to handle
both mon->data->mresists and extrinsics supplied by worn armor, but
polymorph/shape-change was clobbering the extrinsics side of things.
Potentially fixing that by changing newcham() to use set_mon_data(...,1)
instead of (...,0) solved that but exposed two other bugs. Intrinsics
from the old form carried over to the new form along with extrinsics
from worn armor, and update_mon_intrinsics() for armor being destroyed
or dropped only worked as intended if the armor->owornmask was cleared
beforehand--some places were clearing it after, so extrinsics from worn
gear could persist even after that gear was gone.
So, fixing the set_mon_data() call in newcham() was a no go. This
fixes update_mon_intrinsics() and adopts the suggested code from
github pull request #177 to have mon->mintrinsics only handle worn
gear instead of trying to overload innate intrinsics with that. This
is a superset of that; the flag argument to set_mon_data() is gone
and mon->mintrinsics has been renamed mon->mextrinsics. (The routine
update_mon_intrinsics() ought to be renamed too, but I didn't do that.)
A polymoprh zap which creates a long worm can hit and transform the
same monster again depending upon tail segment placement. Similar
behavior occurs if monpolycontrol is set in wizard mode and player
chooses 'long worm' for what to transform an existing one into (in
which case polymorph fails and zap might hit that same worm again
in another segment, prompting player to choose its new shape again).
Simplest fix would be to make tail segments be immune to polymorph,
but that would prevent players from deliberately attacking the tail
(for polymorph attacks only). Next simplest would be to make long
worms M2_NOPOLY so that polymorph can't create them, then just live
with multiple promptings when monpolycontrol is set. This fix
tracks whether a long worm has just been created via polymorph (or
explicitly retained its shape via monpolycontrol) and makes further
hits on same creature on same zap have no effect. It does so by
setting mon->mextra->mcorpsenm to PM_LONG_WORM when a long worm is
result of polymorph, and setting context.bypasses to get end-of-zap
cleanup. (It doesn't bother discarding mon->mextra if reset of
mcorpsenm leaves mextra empty.)
Redo how updates of permanent inventory window are suppressed during
restore. Reverses part of e9f1e03271
which included a simpler attempt to deal with this.
It looks like we should have been getting impossible "unpaid_cost:
object wasn't on any bill" but segfault was reported; I haven't tried
to figure out why. The band in xname() ought to be redundant now but
is included for bulletproofing.
Fixes#106
If dipping a worn amulet into a potion of polymorph turns it into an
amulet of change, the game panics while trying to use up that amulet
when the new one hasn't replaced the old one in inventory yet. Simply
reordering the relevant code isn't sufficient to fix things: once it
is in inventory and can be successfully used up, later code would end
up deferencing a stale pointer because it was unaware of the deletion.
H7205 - full-pack identify might skip items if perm_invent is on
because updating the inventory window might reorder 'invent'
while the identify code is in the midst of traversing it;
H7120 - pickup that doesn't pick anything up can change the glyph
shown on the map because the pile might be reordered such
that a different item is on top;
H5216 - performing a sortloot operation on a pile and then switching
back to sortloot:none doesn't restore pile's original order.
The 'revamp' that changed the contributed sortloot feature to switch
to simpler usage (object list itself was sorted rather than having a
parallel array that needed to be constructed, sorted, traversed, and
discarded) turns out to have too many problems. This reverts to a
hybrid solution that constructs an array for traversal, leaving the
linked list in its original order, but hides most of the details of
that from sortloot() callers. The 'revamp' benefit of being able to
use normal list traversal is lost, as is the potential to skip
sorting when the list turns out to already be in the desired order.
This could stand to have a lot more testing than it's had so far.
> [1. perm_invent is kept in flags so persists across save/restore, but
> perm_invent capability can change if player restores with a different
> interface--or same one running on a different-sized display--so it
> ought to be in iflags instead.]
Not addressed here.
> 2. perm_invent window does not get updated when charging a wand (or
> other chargeable item presumably), with a scroll of charging.
Most scrolls rely on useup() -> update_inventory(), but charging uses up
the scroll early so that it will be gone from inventory when choosing an
item to charge. It needed an explicit update_inventory() after charging.
> 3. update_inventory(), is called from setworn(), which is called from
> dorestore(), when loading a save. Segfaults have been observed in
> variants based on this code (though not yet in vanilla 3.6.1), so it's
> possible this may be unsafe. The update_inventory() call in setworn()
> could be protected with "if (!restoring) ..."
tty doesn't support perm_invent, so this might be a win32 issue.
I've made the suggested change, but a better fix would be to turn off
perm_invent as soon as options processing (new game) or options restore
(old game unless/until #1 gets changed) has finished setting things up,
then turn it back on at the end of moveloop()'s prolog when play is
about to start.
= =
Most of the read.c change is reordering prototypes to match the order
of the corresponding functions. I did this when adding a new static
routine, then ended up discarding that routine.
I think this finally quashes the "cursed without otmp" issue.
Various ways of destroying wielded weapon used setnotworn() rather
than unwield(), so the previous change to have unwield() clear the
pending W_WEP bit from takeoff.mask wasn't sufficient to prevent
'A' moving on from another item (blindfold--it's the only thing
processed before primary weapon) to weapon which wasn't there any
more. Also, if weapon was already set in takeoff.what to be
processed on the next move, clearing W_WEP from takeoff.mask wasn't
sufficient either.
Move the previous unwield() 'fix' to setworn() and setnotworn() and
extend it to include cancel_don() if the item being replaced or
removed is in progress or scheduled for next. (Most of the time,
remove_worn_item() has already done that before setworn() or
setnotworn() is called.)
timeout.c: the luck timeout expression caused a bit of thought trying
to decide whether it was doing what was intended (it was). Add some
parentheses so that thought is no longer required. ;-)
worn.c: fix up a macro where automated reformatting mistook a
bitwise-and operation for a cast applied to the address of something.
The automated reformatting put a space in casts of the form
'(type)(expression)', yielding '(type) (expression)', but it didn't
do that for '(typedef)(expression)'. There are lots of instances of
'(boolean)(expression)'; (uchar) and (xchar) also occur. I haven't
noticed other types, but I haven't looked in very many files yet.
End of first pass, but '[&|?:][ \t]*$' doesn't catch trailing operater
followed by end-of-line comment so more needs to be done. As with the
past couple of batches, I've removed redundant parentheses from 'return'
statements but only for files that had continuation fix-ups.
I've also removed tabs from comments in some of the files, but didn't
start until part way through this subset of the sources.
While looking at clear_bypasses() I noticed some excluded code [#if 0]
which could be risky to include, so update the comment there. Also,
excluded code tends to need formatting fix-up.
I'll push a formatting guide at some point. There may still be
outstanding changes, but please feel free to resolve those as you arrive
a them.
To the best of my knowledge, there is no changes to the actual code
content, but the formatter does have the occasional bug. If you run into
an issue, please fix it!
For those pro players who really want to try their hand
at that zen samurai, without needing to reroll thousands
of times to start with blindfold. Nudist starts without
any armor, and keeps tabs whether you wore any during
the game, for even more bragging rights.
Also makes the Book of the Dead readable even while
blind, for obvious reasons.
From a bug report, dropping a lit
(burning) potion of oil while levitating can produce an explosion which can
destroy inventory. If in the process of dropping multiple items, the ones
after the oil might be gone, resulting in use of stale pointers and possibly
triggering an "extract_nobj: object lost" panic or even a crash. While
testing my fix, I discovered that being killed by an exploding potion of oil
could produce an "object_is_local" panic if bones are saved (and reproduced
with unmodified 3.4.3).
In #H1820, <email deleted> reported that helms
of opposite alignment didn't work for monsters. There's never been
any attempt to implement that, and it wasn't omitted by accident, so
I wouldn't classify it as a bug. But it does seem buggy that temple
priests and minions of <deity> would be willing to put such helms on
and risk changing allegiance to another deity. This lets other types
of monsters still wear helms of opposite alignment as ordinary head
protection, but the explicity aligned creatures won't do so anymore.
Like their use of lizard corpses to defeat being turned into stone,
let monsters use wands of fire, fire horns, and scrolls of fire to try to
defeat being turned into slime. If the scroll is read while confused, it
won't succeed. Otherwise, monsters who don't resist fire will take some
damage in the process and might end up killing themselves (although with
the testing I've gone I've yet to see that happen--I guess that means
that handling for dying-in-the-process hasn't been adequately tested...).
So far, they don't know how to jump onto adjacent fire traps, nor
will fire breathing monsters breath at themselves. I don't know whether
I'll get around to tackling either of those.
Extend rotouch_equipment() to cover all items in use, worn/carried/
invoked in addition to wielded. Done when you change alignment, change
shape, or catch lycanthropy. No-longer-touchable items inflict modest
damage; worn/wielded ones will be unworn/unwielded. For the shape change
and lycanthropy cases, unwieled weapons are also dropped. Other unworn
stuff stays in inventory, as do weapons for the alignment change case.
It ought to force off gloves if worn silver--or hypothetical
artifact--ring has become untouchable and gets unworn. Instead it just
curses the gloves, if necessary, so that there's some plausibility to
having the ring come off.
From a bug report: zapping wand
of speed monster (or slow monster) at an immobile monster would give the
usual '<mon> is moving faster" (or slower) message even though the monster
couldn't move at all. This fixes that for monsters who can never move
and also for monsters who are temporarily paralyzed or asleep, although I
wonder whether speed change magic ought to also snap the latter out of it.
From a bug report. That's hard to fix in the general case because armor
and tools might not fit back into the same equipment slot, but most other
types of worn items can be re-worn after being transformed. This makes
any transformed worn item stay worn if it is wearable in the same slot.
simple_typename and obj_typename operate on item types rather than
particular objects so have to assume that the item involved has been seen.
That means that simple_typename(obj->otyp) is not suitable; if obj->dknown
hasn't been set, it gives away information. This adds mininal_xname(obj)
to be used for that purpose. I'm not aware of any straightforward way to
actually expose the original problem; it's more than hypothetical but not
something anyone's likely to have come across.
Not fixed: test driver program reveals that obj_typename(GOLD_PIECE)
and simple_typename(GOLD_PIECE) yield "coin of gold piece". But I don't
think there's any way to get nethack to show that to the user.
