- bmp2iff_host: convert nhtiles.bmp to Amiga IFF tile files. Uses
the AMIV UI palette in pens 0-15, remaining pens filled with tile
colors sorted by frequency.
Usage: bmp2iff_host -planes N input.bmp output.iff
- xpm2iff_host: convert XPM to IFF for tomb.iff (RIP screen).
Adapted from xpm2iff.c, Copyright (c) 1995 Gregg Wonderly.
- Auto-select tiles32.iff (5 planes) or tiles16.iff (4 planes)
based on screen color depth at runtime.
- Fix NO_GLYPH in amiv_lprint_glyph: return early to prevent
blitting with uninitialised data (caused black spots).
- Add AmigaFont symbol set to dat/symbols for AMII text mode.
I normally force DECgraphics for tty and for curses so hadn't noticed
this before. I recently let curses default to 'cursesgraphics' and the
engraving-in-room character was crossed horizontal and vertical bars,
the crosswall character. It certainly stood out in the middle of a
room, but the emphasis seems out of proportion for "engraving here".
There is no 'epsilon' among the DEC line drawing characters. Curses
might be able to render one, but not with DEC-style rendering of 0xEE.
Comment out S_engroom so that curses inherits the default backtick.
Exercise the previous commit a little.
FIQ's suggested wildcard syntax would make this easier
and a lot less verbose, but that isn't available yet.
This updates (adds some colored walls on specific levels) to the following:
IBMgraphics
IBMgraphics_1
IBMgraphics_2
curses
DECgraphics
The 0x1000000 bit (NH_BASIC_COLOR bit) was used to mark
CLR_BLACK when storing it in u->ucolor. Now, all of the basic CLR_*
colors are stored that way.
The NH_BASIC_COLOR bit indicates that the value in u->ucolor is
not an rgb value, rather it is one of the 0-15 basic NetHack colors.
The window-ports need to strip the NH_BASIC_COLOR bit off before using
it for color changes.
Noticed when testing the OPTIONS=symset:blank fix, map spots holding
engravings weren't blank.
Are there any other relatively recently added symbols that need to be
added to the blank set?
1. Add "engraved room floor" pchar sym (S_engroom). The symbol that
displays at the engraved part of a room (not a corridor though).
The default symbol is '`' which is currently never shown if people
have defined the boulder symbol to '0' and statues are displayed as
monster symbols. It is bright blue.
Add some stylized variations of the S_engroom symset to some of
the symsets.
2. Add "engraved corridor" pchar sym (S_engrcorr). The symbol that
displays at the engraved part of a corridor. The default symbol is
'#', and it matches the symbol for corridor from for whatever the
current symset uses. It is bright blue to match the color of the
S_engroom symbol. Using the normal corridor symbol for display
preserves the lines of the corridor so is not as visually-disruptive
as a smaller symbol would be. Explicit entries that match the S_corr
symbol have been added to the symset file.
Magic mapping and clairvoyance impacts yet to be determined.
The Guidebook updates will come later.
Add "walls of lava", basically lava which blocks vision and
require a bit more than just levitation or flight to move through.
No levels use this yet, as testing isn't thorough enough.
A new feature, enabled by default to maximize testing, but one which can
be disabled by commenting it out in config.h
With this, some additional information is added to the glyphmap entries
in a new optional substructure called u with these fields:
ucolor RGB color for use with truecolor terminals/platforms.
A ucolor value of zero means "not set." The actual
rgb value of 0 has the 0x1000000 bit set.
u256coloridx 256 color index value for use with 256 color
terminals, the closest color match to ucolor.
utf8str Custom representation via utf-8 string (can be null).
There is a new symset included in the symbols file, called enhanced1.
Some initial code has been added to parse individual
OPTIONS=glyph:glyphid/R-G-B entries in the config file.
The glyphid can, in theory, either be an individual glyph (G_* glyphid)
for a single glyph, or it can be an existing symbol S_ value
(monster, object, or cmap symbol) to store the custom representation for
all the glyphs that match that symbol.
Examples:
OPTIONS=glyph:G_fountain/U+03A8/0-150-255
(Your platform/terminal font needs to be able to include/display the
character, of course.)
The NetHack core code does parsing and storing the customized
entries, and adding them to the glyphmap data structure.
Any window port can utilize the additional information in the glyphinfo
that is passed to them, once code is added to do so.
Also, consolidate some symbol-related code into symbols.c, and remove it from
files.c and options.c
The walls for the mines, gehennom, knox, and sokoban had been
changed at the "tile"-level, with no awareness of the core game,
or non-tile interfaces.
- Expand the glyphs to include a set of walls for the main level
as well as each of those mentioned above.
Altars had been adjusted at the map_glyphinfo() level to substitute
some color variations on-the-fly for unaligned, chaotic, neutral,
lawful altars, and shrines. The tile interface had no awareness of
the feature.
- Expand the glyphs to include each of the altar variations that
had been implemented in the display code for tty-only. This required
the addition of four placeholder tiles in other.txt. Someone with
artistic skill will hopefully alter the additional tiles to better
reflect their intended purpose.
Explosions had unique tiles in the tile window port, and the display
code for tty tinkered with the colors, but the game had very little
awareness of the different types of explosions.
- Expand the glyphs to include each of the explosion types: dark,
noxious, muddy, wet, magical, fiery and frosty.
Pile-markers to represent a pile had been introduced at the
display-level, without little to no awareness by the core game.
- Expand the glyphs to include piletops, including objects,
bodys, and statues.
Recently male and female variations of tiles and monsters had been
had been introduced, but the mechanics had been mostly done at the
display-level through a marker flag. The window port interface then
had to increment the tile mapped to the glyph to get the female version
of the tile.
- Expand the glyphs to include the male and female versions of the
monsters, and their corresponding pet versions, ridden, detected
versions and statues of them.
Direct references to GLYPH_BODY_OFF and GLYPH_STATUE_OFF
in object_from_map() in pager.c were getting incomplete results.
- Add macros glyph_to_body_corpsenm(glyph) and
glyph_to_statue_corpsenm(glyph) macros for obtaining the corpsenm
value after passing the glyph_is_body() or glyph_is_statue() test.
Other relevant notes:
- The tile ordering in the win/share/*.txt tile files has been altered,
other.txt in particular.
- tilemap.c has had a lot of alterations to accommodate the expanded
glyphs. Output that is useful for troubleshooting will end up in
tilemappings.lst if OBTAIN_TILEMAP is defined during build.
It lists all of the glyphs and which tile it gets mapped to, and also
lists each tile and some of the references to it by various glyphs.
- An array glyphmap[MAXGLYPH] is now used. It has an entry for each
glyph, ordered by glyph, and once reset_glyphs(glyph) has been run, it
contains the mapped symindex, default color, glyphflags, and tile
index.
If USE_TILES is defined during build, the tile.c produced from the
tilemap utility populates the tileidx field of each array element with
a glyph-to-tile mapping for the glyph. Later on, when reset_glyphmap()
is run, the other fields of each element will get populated.
- The glyph-to-tile mapping is an added field available to a window
port via the glyphinfo struct passed in the documented interface. The
old glyph2tile[] array is gone. The various active window ports that
had been using glyph2tile[] have been updated to use the new interface
mechanism. Disclaimer: There may be some bug fixing or tidying
required in the window port code.
- reset_glyphmap() is called after config file options parsing
has finished, because some config file settings can impact the results
produced by reset_glyphmap().
- Everything that passes the glyph_is_cmap(glyph) test must
return a valid cmap value from glyph_to_cmap(glyph).
- An 'extern glyph_info glyphmap[MAX_GLYPH];' is inserted into the
top of only the files which need awareness of it, not inserted into
display.h. Presently, the only files that actually need to directly
reference the glyphmap[] array are display.c, o_init.c (for shuffling
the tiles), and the generated tile.c (if USE_TILES is defined).
- Added an MG_MALE glyphflag to complement the MG_FEMALE glyphflag.
- Provide an array for wall colorizations. reset_glyphmap() will draw
the colors from this array: int array wallcolors[sokoban_walls + 1];
The indices of the wallcolors array are main_walls (0), mines_walls
(1), gehennom_walls (2), knox_walls (3), and sokoban_walls (4).
In future, a config file option for adjusting the wall colors and/or
an 'O' option menu to do the same could be added. Right now, the
initializaton of the wallcolors[] array entries in display.c leaves the
walls at CLR_GRAY, matching the defsym color.
- Most of the display-level kludges for some of the on-the-fly
interface features have been removed from map_glyphinfo() as they
aren't needed any longer. These glyph expansions adhere more closely to
the original glyph mechanics of the game.
- Because the glyphs are re-ordered and expanded, an update to
editlevel will be required upon merge of these changes.
Use a slightly more meaningful name for each one rather than
a sequential numerical name.
S_explode1 to S_expl_tl
S_explode2 to S_expl_tc
S_explode3 to S_expl_tr
S_explode4 to S_expl_ml
S_explode5 to S_expl_mc
S_explode6 to S_expl_mr
S_explode7 to S_expl_bl
S_explode8 to S_expl_bc
S_explode9 to S_expl_br
Symbol set changes...
curses:
S_tree (use plus-or-minus sign instead of accidental horizontal line);
S_bars (switch from default '#' to not-equals sign);
DECgraphics:
S_altar (switch from default '_' to 'pi');
S_bars (switch from 'pi' to not-equals sign);
DECgraphics_2: get rid of this commented out set since its contents are
now folded into DECgraphics.
(The IBMgraphics one is just whitespace; delete a <space> that precedes
a <tab>.)
Change the way symbol sets are loaded to make them have the same order
as they appear in the symbols file rather than being reversed.
Revise dat/symbols so that the new ordering yields a result similar
to the old ordering, more or less. I've added a few set descriptions.
The only substantive change is marking DECgraphics as primary-only
(not available on rogue level) and adding new set DECgraphics_2 which
is commented out near the end.
Define symbol handling H_MAC since one of the sets specifies
'handling: MAC'. All H_MAC is used for now is to avoid showing
MACgraphics as a symset when compiled without MAC_GRAPHICS_ENV (which
was used for pre-OSX Mac by the old code in sys/mac/), so it will be
hidden for everyone.
I left handling H_CURS even though curses doesn't implement anything
for it. It could do something when rendering the map or assign a
function to 'cursesgraphics_mode_callback' for special init or both
but hasn't needed to. Since curses is now supporting DECgraphics,
define 'decgraphics_mode_callback' for it. No value is being
assigned so that doesn't do anything; curses seems to be setting up
the primary character set as text and secondary one as line-drawing
without the need for that hook.
With the added set descriptions, 'O's symset menu looked horrible for
curses due to the way curses decides to set the width of menus and
the resulting line wrapping which took place because of a too-narrow
menu. I've added a chunk of code to the options handling code which
shouldn't really be there but makes the menu much easier to read.
Lastly, do some formatting cleanup in files.c.
This time I'm putting things in as-is before making a few tweaks.
The pull request was three or four separate changes. I used the
patch instead so they've been collected into one commit.
For the DECgraphics symbol set, down ladder is the greater-than-or-
equal-to character as intended and up ladder is less-than-or-equal-to,
but comments in dat/symbols had their descriptions transposed.
The blank symbol set can be used with screen reader software
to prevent it from reading the map symbols.
Prevent a segfault when looking at the map and many symbols
share the same character. Don't list too many symbols when
looking at those, if many share the same character.
I don't know whether this fixes #H4335 but it does eliminate a
bunch of duplicate symbol entries. And the two whose duplicates
had different values are suspicious ones: using linefeed and tab as
the character for object class symbol, which could easily confuse
the tty interface's cursor position tracking. But those should
have been overridden by the later entries which specified the
default object class characters--I couldn't find anything in symbol
processing which would cause it to keep the first value instead of
replacing that with the second one.
The report had a link to screen shot which showed a door (I think
an open one despite the '+' shape) in the corner inside a room,
something like
--+-----------
| |
| =
| ..##
| .+#
----+---------
where the '+#' in the lower right looks like it belongs two rows up
and one column over, the upper left of the three '#' is white and
the other two gray (lit corridor or empty dooryway or what?), the
'=' is actually three horizontal bars in green, and the lower '.'
has the cursor on it. There aren't any object class symbols shown
(unless the triple-barred = is one), so linefeed and tab don't look
like likely culprits.
This set is the same as the default ascii symbols except that corner
walls are represented with '+' instead of '-' or '|' so that wall
joins are clearer. The baalz level looks a little better this way,
although not a lot. Unfortunately, most levels look a bit cluttered
with this, so I imagine it won't get a lot of use. At least it
serves as an example of being able to use "'c'" instead of "\123".
Originally I specified every terrain symbol explicitly, which was
how I noticed that S_darkroom and S_vibrating_square weren't being
handled. This has cut it down to just the wall symbols, serving as
explicit example of accepting default symbols for unspecified ones.
This reverts commit 7f0f43e6f9 and some related
subsequent commits.
This compiles, but I have not done extensive testing.
Conflicts:
include/config.h
include/decl.h
include/extern.h
include/global.h
include/tradstdc.h
include/wintty.h
src/drawing.c
src/files.c
src/hacklib.c
src/mapglyph.c
src/options.c
sys/winnt/nttty.c
win/tty/getline.c
win/tty/topl.c
win/tty/wintty.c
This patch attempts to add some levels of unicode support
to NetHack.
The master on/off switch for any Unicode support is
defining UNICODE_SUPPORT in config.h. Currently
there is code support for two subsets of unicode support:
UNICODE_DRAWING
If UNICODE_DRAWING is defined, then the data
structures used to house drawing symbols are expanded
to the size of wchar_t, big enough to hold unicode characters.
A typdef called `nhsym' is involved and if UNICODE_DRAWING
is defined, it is wchar_t, otherwise it is uchar.
UNICODE_WIDEWINPORT
If UNICODE_WIDEWINPORT is defined, then the data
structures inside the window port are expanded to the size of
wchar_t, big enough to hold unicode characters. Both map
symbols and text within the window port are expanded, in order
for potential support for displaying multinational characters some
day, but this patch only provides viewing of map symbols.
A typdef called `nhwchar' is involved and if UNICODE_WIDEWINPORT
is defined, it is wchar_t, otherwise it is char.
The only window port with code support for UNICODE_WIDEWINPORT
currently is the TTY port. Don't enable UNICODE_WIDEWINPORT
unless:
- it is a TTY port
- the underlying platform specific routines can
handle the larger data structures.
Don't enable UNICODE_SUPPORT unless:
- your compiler can handle wchar_t.
- your compiler can accept L'a' characters.
- your compiler can accept L"wide" strings.
Note that if your compiler can handle the above, you could
enable the larger data structures (currently if TTY) even if your
platform can't actually display unicode or UTF-8, by messing
with u_putch() in win/tty/wintty.c to only deal regular chars.
That should be the only function that actually pushes wide characters
out to the display.
If you enable UNICODE_SUPPORT, and your platform is capable
you will need to turn on the unicode run-time option to be able to
load unicode character sets from the symbol file, to be able to
push unicode characters to the display. You'll also want to load
a unicode symbol set once the unicode option is toggled on. In
a config file you would do that via these two lines:
OPTIONS=unicode
OPTIONS=symset:Unicode_non_US
The repository was stamped with NETHACK_PRE_UNICODE
prior to applying this patch, and stamped with
NETHACK_POST_UNICODE afterwards. The code differences
between those two tagged versions are this patch.
Pat Rankin wrote:
> I was about to also suggest that there
> be a rogue/non-rogue (with perhaps a third choice meaning "both")
> attribute. That way we could keep the rogue choices from being
> listed in the "symset" menu and the non-rogue choices from the
> "roguesymset" menu. Players who deliberately wanted to switch
> over would need to modify the attribute, possibly on a cloned set.
> Or perhaps they could just explicitly set their desired choices
> via NETHACKOPTIONS or .nethackrc and not use the 'O' menues--the
> new attribute doesn't necessary have to block which sets get used
> where, just filter menu entries to display the most applicable
> candidates.
Pat Rankin wrote:
> Symbol set definitions need a description attribute, above and
> beyond allowing comments in the file, for inclusion in the 'O'
> command's menu entries for selecting them.
[...]
> mapglyph.c isn't the proper place to decide whether to define
> ROGUE_COLOR. That may need to become a symbol attribute,
> which we'd then specify on the Epyx rogue set(s).
Implement both of the suggestions above.
A first cut at adding some user-level documentation to dat/symbols.
It should probably include a brief example (not verbose description) of
how to specify values in the various supported formats (decimal, octal,
hexadecimal, simple string, string including escape sequeces?). Perhaps
a pointer to the Guidebook too. :-}
This takes the PC config file commented symbol value
recommendations from <Someone> for blind players
and puts them into a symset.
[note to devteam: They look odd. I thought perhaps that
something was code wrong, but I went back to 3.4.3
and uncommented the config file stuff. They look the
same there, still odd, especially corridors.
Does anyone have any of the e-mail from <Someone> that might give an indication of what is supposed
to be seen on the display? I wonder if those config
file options fell out of synch with the code long ago]
