Apparently the compiler for OSX 10.11 + Xcode 7.3.1 is defaulting
to C99 (or C11?) because it is enabling a gcc warning that is
included by -Wextra (newer name for obscure -W) for C99 or later.
lev_comp.y:2276:20: warning: shifting a negative signed value is undefined
[-Wshift-negative-value]
(yyval.i) = SP_OBJ_PACK(-1, (yyvsp[(1) - (1)].i));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../include/sp_lev.h:248:33: note: expanded from macro 'SP_OBJ_PACK'
\#define SP_OBJ_PACK(o, c) (((o) << 8) + ((char) (c)))
\ ~~~ ^
SP_MONST_PACK() and SP_OBJ_PACK() are both called with -1, and
SP_MAPCHAR_PACK() is called with either -1 or -2. The revised
macros add 10 when encoding and subtract it when decoding so that
they can handle -1 through -10 without shifting negative values.
There were also several bitwise ANDs that the bulk reformatting
misclassified as casts of hardcoded addresses.
"Your pair of speed boots glow silver for a moment." should be
"Your pair of speed boots glows silver for a moment.". The fix
reverses a post-3.6.0 change to is_plural(). Also, add new
pair_of() to test for object formatted as "pair of Bars". For verb
usage, that's definitely singular, but for pronoun usage, sometimes
plural seems better (although it might actually be incorrect).
I fixed up the formatting of a block comment in obj.h, but it is
still a candidate for tab cleanup.
The #tip command tries to reduce verbosity by formatting drop messages
with just the object name instead of with full sentences, yielding
Objects spill out: obj1, obj2, obj3, ..., objN.
where the trailing comma or period is included with each successive
object. If an intervening message occurs, such "25 zorkmids are
added to your credit", the rest of the objects will no longer be
extending the original sentence and end up looking silly.
Objects spill out: obj1, obj2,--More--
25 zorkmids are added to your credit. obj3, ..., objN.
This fix causes the post-interruption messages to revert to verbose
format.
Objects spill out: obj1, obj2,--More--
25 zorkmids are added to your credit.--More--
obj3 drops to the floor.--More--
...
objN drops to the floor.
The interrupting message still follows the comma of the partial
sentence, but I don't see any sane way to fix that other than to
abandon the terse format altogether, and doing that makes #tip way
too verbose when the container has a lot of items in it. But #tip
inside shops now does that, since there will always be buy/not-
interested feedback interrupting the terse format in that situation.
For other situations, a full sentence message might end up following
a partial sentence list of dropped items.
There was a more significant bug. Dropping a hero-owned container
with gold in it onto shop floor sold the gold to shk, giving hero
credit. Subsequent #tip gave the hero credit for that same gold
when it spilled out. addtobill(obj) relies on obj->ox,oy to
determine whether events are taking place in a shop, and #tip was
relying on placement onto floor to set those, too late for shop
billing. The fix yields suboptimal results: you're given credit
when you drop the container, then during #tip when you spill the
contents, credit for the gold is removed, then new credit for it
is given. That's down to shop insanity, not tipping behavior.
My old monkey patch was a bit more extensive than Pasi's, although
it didn't originally include letting apes be tameable with bananas.
No sense in throwing it away:
1) Make monkeys and apes be omnivores instead of carnivores.
2) Make bananas be preferred food for herbivore/omnivore subset
of Y-class, so excludes carniverous ape, owlbear, and yeti.
[Sasquatch remain omnivorous but aren't tameable with bananas.]
3) While updating befriend_with_food(), make horses be affected
only by food they might eat, not by meat and corpses and tins.
So they'll be somewhat harder to cope with for characters not
strong enough to kill them. [Dogs and cats are unchanged.]
Not included (not even implemented...):
0) Allow archeologists to choose monkey for starting pet.
[The one in "Raiders of the Lost Ark" didn't actually belong
to Indiana Jones but spent a lot of time accompanying him.]
Bananas are quite rare, and none of the simians are very strong,
so this won't be in any way overpowered - just a bit of flavor.
I think this was originally Derek's change from Sporkhack, but
similar ones have been done in the community multiple times
in the past.
Config file handling remembers the name of the last config file
read in order for options processing to use it in messages, but
it was also reused as default config file name if user-supplied
config file name failed access() test. So the SYSCF file became
the default user config file after it was used. The config file
handling was a real mess.
This patch fixes it for Unix but there is a lot of scope for
typos in the changes for other platforms. Testing is needed.
Make the whatdoes ('&' or '?f') command support the 'altmeta' option
for meta-characters generated by two character seqeunce 'ESC char'.
Also, make it be more descriptive when reporting "no such command"
by including the numeric value it operated on when failing to match
any command. That might provide a way for us to get some extra
information when players report problems with odd keystrokes: we ask
them to type such at the "what command?" prompt and then tell us what
numbers come up.
It's been given a help file to deal with assorted idiosyncracies
which can come up when querying what keys do. Unfortunately that
ended up being way more verbose than intended.
Installation of the extra data file has only been done for Unix.
Other platforms will get "can't open file" if they respond with
'&' or '?' to the "what command?" prompt. The command will still
work though, just without the extra text.
This is the Pet ranged attack -patch by Darshan Shaligram,
with the spellcaster parts removed to keep it simpler.
Pets will now throw, spit and breathe at other monsters.
Change most instances of detection to offer the player a chance to
move the cursor around on the map so that the getpos() autodescribe
feature can explain things that might go away as soon as the
current detection completes. The few instances that don't offer
such a chance are the ones where everything which has been revealed
will still be there once the action finishes (such as regular magic
mapping and blessed/persistent monster detection).
There were quite a lot of inconsistencies in things like handling
for detection while swallowed or underwater. I didn't keep track
of them to distinguish between 3.6.0, current dev code, or my patch
in progess. They should be much more consistent now but without a
comprehensive fixes36.1 entry.
Blessed clairvoyance (divination spells at skilled or expert) now
shows monsters as well as terrain. I first had it like that for
any clairvoyance, but having getpos/autodescribe kick in every 15
or 30 turns once you have the amulet--or pay the appropriate amount
to a temple preist--was nearly unplayable. When it only follows an
explicit spell cast it is not intrusive.
Some groundwork for detection enhancements.
you.h - just formatting
flag.h - add iflags.save_uswallow so that u.uswallow manipulation ...
save.c - ... can be undone if a hangup save occurs
When confused gold detection finds a door trap or a chest trap, it
puts a bear trap glyph/tile on the map at that location. (They
disappear once they're within sight.) Those should be given their
own glyphs so that they can have their own tiles, but this doesn't
do that. What it does do is describe such fake bear traps as
"trapped door" or "trapped chest" when examined with far-look.
The '^' command--if used while blind so that '^' hasn't disappeared
yet--needs to catch up: it says "I can't see a trap there" when the
adjacent '^' is a fake bear trap.
When travel fails to reach its destination, it remembers the target
spot to use as default next time. But that spot is only meaningful
on the current level. Discard last travel destination when moving
to a different level.
Also, discard unlocking context when changing level unless the
context is for a container being brought along (after having been
picked up since you can't unlock a carried box). Previously, a
door pointer on the new level could happen to match the last one
being unlocked on the old level.
Discard trap setting context when changing level even if the trap
object is brought along.
Somehow the code for applying a touchstone got inserted in between
two sections of code for applying a trap (ages ago; probably since
touchstone was first introduced however many versions back), so
clean that up.
Add MG_BW_LAVA to mapglyph() instead of hijacking MG_DETECT. Used
to display lava in inverse video if color is disabled and lava is
using the same display character as water (which is the default).
(The use_inverse option must be enabled for tty to honor it. X11's
text mode doesn't care. Win32 does care but probably shouldn't--it's
not a case like tty where the hardware might not support it.)
This implements both MG_DETECT and MG_BW_LAVA for X11, but only if
the program is built with TEXTCOLOR enabled. Those should work even
when color is not supported, but I suspect that configuration is
unlikely to ever be used so didn't want to spend the time to figure
out how to do it. (The relevant data is overloaded on the color
data, so not available when TEXTCOLOR is disabled.)
The win32 revision is untested.
Reported almost exactly one year ago by a beta tester proofreading
the Guidebook, the number_pad setting to support the German keyboard
which swaps the Y and Z keys is for a keyboard that is used in other
places too. The report mentioned France and Belgium; Wikipedia's
"keyboard layout" entry mentions "Germany, Austria, Switzerland and
other parts of Central Europe". This changes references to "German
keyboard" (there were only a couple) into "QWERTZ keyboard".
Requested during beta-testing however long ago: want a way to
look at specific map locations while #terrain is showing them
without monsters and/or objects and/or traps being displayed in
the way. The post-3.6.0 autodescribe feature for getpos() made
this pretty easy to achieve, although the lookat() aspect felt
more like trail-and-error than careful design.
Instead of putting up a --More-- prompt, ask the player to pick
a location with the cursor. Moving the cursor gives the terse
description for every location traversed. Actually picking a
spot just ends #terrain and goes back to normal play.
Do it properly, using the arguments to xkilled() instead of reversing
the conduct counter after the fact.
The xkilled() flag value of '1' has been reversed. It used to mean
'display message' but now means 'suppress message' since both of the
other flag bits are for suppression. All callers have been updated
to specify either XKILL_GIVEMSG or XKILL_NOMSG so the underlying
number remains transparent.
...to make it more interesting. Using #vanquished in wizard mode
or answering 'a' to the "disclose vanquished monsters?" prompt will
put up a menu to choose how the list of vanquished monsters should
be ordered. Right now there are 6 choices:
Traditional: by monster level, by internal index within level;
by monster toughness, by internal index within monstr[] rating;
alphabetically, first unique monsters, then others;
by monster class, low to high level within class;
by count, high to low, by internal index within tied count;
by count, low to high, by internal index within tied count.
Two other orderings are implemented but suppressed from the menu
since they seemed uninteresting (alphabetical with uniques
intermixed with other monsters, and by-class high to low within
class). The first two are very similar to each other and one of
them should probably be discarded too. The by-class order(s) have
class-name separator lines between classes.
Options parsing for end of game disclosure has extended current
+v (always show vanquished monsters)
-v (never show vanquished monsters)
yv (prompt about them, with default response 'y')
nv (prompt about them, with default response 'n')
to include
#v (always show vanquished monsters and choose the ordering)
?v (prompt about them, with default response 'a' to choose ordering)
The 'a' response was picked because it's easy to use ynaq()
instead of ynq(), but it can be considered to mean "ask about sort
order". (Neither of the two new option values could be "av"; 'a'
for disclosing attributes would become ambiguous.)
+v or answering 'y' for any of yv, nv, or ?v uses the most recent
sort ordering (if #vanquished has been used in wizard mode) or the
traditional one (normal mode, or #vanquished not used). Players
will probably want to specify a default order and then use +v
rather than choose the final order from a menu. That hasn't been
implemented here. Count high to low might be a better default than
level high to low.
While looking through Guidebook.tex to try to determine whether
the new text needed special handling, I spotted multiple mistakes
in the existing text. Probably all from earlier updates of mine;
this attempts to fix them. As usual of late, Guidebook.mn has been
tested and Guidebook.tex hasn't.
At the end of December, farlook was changed to use doname() instead
of xname() in order to give more information when looking at stuff
the player had already seen. But it ended up giving away precise
stack size for mergable objects too, even if they hadn't been seen
up close. Changing doname() to be vague when dknown wasn't set
only worked for items in particular classes; dknown is pre-set for
a lot of things. So this changes mksobj()'s dknown handling to not
do that for stackable items.
The change to objclass.h is just comment formatting (for the first
part of the file only), provoked by the second line of the one for
oc_pre_discovered.
This ended up being more elaborate than I anticipated. 'Q' will
now accept the wielded weapon as a choice of item to quiver. If
that item is a stack of more than one, it will offer to split N-1
into the quiver and leave 1 wielded. If the offer is declined, or
if there is already just 1, it will require confirmation to move the
item from the weapon slot to the quiver slot. The alternate weapon
is handled similarly, with different phrasing when in twoweapon
combat mode.
Just to be crystal clear: a single object cannot be in more than
one weapon, alt-weapon, or quiver slot at the same time. 'Q's old
behavior of rejecting the wielded weapon was to avoid accidentally
becoming empty-handed, not anything to do with multiple worn/wield
slots.
'Q' will also accept a count when picking an inventory item, then
put 'count'-many into the quiver, leaving N-count in original stack.
Except when the chosen item is already in the quiver; it that case,
it undoes the stack split and leaves things as they were. (That
restriction may not have been necessary but I'm not planning to
revisit it....)
flags.sortloot was changed from boolean to xchar, but proper type
is plain char. (Presumeably it was originally off or on, then got
changed to 'n' for off, 'l' for on, plus 'f' for super-on.)
Also, make the sortloot menu for 'O' mark the current value as
preselected when interactively setting the value. (I've been
meaning to do this for various other options but haven't gotten
around to it. The need to workaround PICK_ONE+MENU_SELECTED menu
behavior is a nuisance.)
Force the menu for the look-here command when 'here' is the inside
of an engulfer to be PICK_NONE. That way '>' won't exit the menu
by choosing the extra inventory item "> - hero".
Extend #stats beyond just monsters and objects. Have it display
memory usage for traps, engravings, light sources, timers, pending
shop wall/floor repair, regions, bones tracking, named object types,
and dungeon overview.
No doubt there are other memory consumers that I've overlooked.
When typedefed to C99's bool type, Clang complains in container_contents about "comparison of constant 108 with expression of type 'boolean' (aka 'bool') is always false".
Add support for character enclosed within single quotes. Single
character without quotes would work for most characters, but not
'#' and possibly not '^' or '\\'. All the values in dat/symbols
are specified via backslash+digits so it isn't obvious that some
other form of value is allowed.
I think this parsing accepts all valid values. It doesn't reject
all invalid ones: opening quote followed by valid escape sequence
followed by junk followed by closing quote will ignore the junk.
I don't think there's any pressing need to worry about that.
Take the 4-5 line Debian patch and turn it into six dozen lines of
new code. The submitted patch introduces use of several C library
routines that aren't presently in use, so would need testing by all
functional or nearly-functional ports to verify that it wouldn't
break anything. It also switched the formatted build date+time
from localtime to UTC. This makes the code conditional so it can
be ignored by anybody and avoid the risk of breakage. And a lot of
the increase in size is comments attempting to explain what the new
conditional is for: when REPRODUCIBLE_BUILD is defined, makedefs
will use getenv("SOURCE_DATE_EPOCH") (whose value is an integer
representing seconds since 1-Jan-1970) instead of current date+time
when generating date.h. The purpose is to be able to rebuild at a
later date and produce an identical program, which doesn't happen
when compile time gets incorporated into the binary.
I've added some sanity checking to try to make sure the getenv()
value obtained isn't bogus. And the version string put into date.h
will be slightly different, allowing someone who sees date.h or 'v'
output to tell whether SOURCE_DATE_EPOCH was involved: showing
"<port> NetHack <version> last revision <date>" instead of the
usual "... last build <date>".
To test, checkout a new branch for building, make any local edits
to unixconf.h and config.h, including enabling REPRODUCIBLE_BUILD,
git add+commit them, then use
SOURCE_DATE_EPOCH=`git log -1 --pretty=%ct` make install
Other ports will need a bit more work to set up the environment,
but can still use git to track file dates and supply the latest.
Building with alternate configurations could be accomplished by
using tags instead of 'log -1' or by using distinct build branches
where nothing is commited/merged/rebased after completed build.
Unresolved issue: BUILD_DATE, VERSION_ID, and COPYRIGHT_BANNER_C
contain formatted date+time but omit timezone. SOURCE_DATE_EPOCH
is assumed to be UTC but the formatted values don't say so, so it
might appear to be incorrect when compared with local time. We
definitely don't want to start mucking about with timezones within
nethack, so I think we just live with this. It's not an issue for
default configruation where REPRODUCIBLE_BUILD is left disabled.
Make 'zeromonst' global instead of local to makemon.c. Its address
isn't used as a special value like &zeroobj, but it is useful to
have available for initializing various pseudo-monsters.
modified:
include/decl.h
src/decl.c, makemon.c, mkobj.c, mplayer.c, teleport.c
Some worthwhile stuff from abandoned 'git stash':
is_plural() macro wasn't comprehensive;
a couple of return values where writing with a magic marker was
causing time to elapse even though nothing happened;
comment formatting for saddle being left in shop by dying steed.
Change the sortloot option to use qsort() instead of naive insertion
sort. After sorting, it reorders the linked list into the sorted
order, so might have some subtle change(s) in behavior since that
wasn't done before.
pickup.c includes some formatting cleanup.
modified:
include/extern.h, hack.h, obj.h
src/do.c, do_wear.c, end.c, invent.c, pickup.c
There have been two or three reports on getting feedback about
amulets rusting. Object formatting doesn't display erosion for
them, so being told about damage then not seeing that damage
feels like a bug. Even if damage was displayed, it has no effect
on them so would still feel somewhat strange. It does display
erosion for wands and rings, which is strange too.
This limits erosion damage--and its feedback--to items which are
actually impacted by erosion: armor, weapons and weapon-tools;
also heavy iron balls and iron chains since they've traditionally
shown rust even though it has little effect.
A side-effect of this change is that flammable items (other than
armor and weapons) which don't burn up immediately will no longer
become burnt, then very burnt, thorougly burnt, and finally be
destroyed. Since the player couldn't see or possibly repair the
erosion state, it seemed incomplete. It could be reinstated by
making other flammable items be subject to erosion and displayed
as such by xname() & co.
Wishing now avoids applying erosion and erosion-proofing to items
that aren't affected by it, regardless of material. It also now
allows wishing for "rusty rustproof <iron-object>" which used to
suppress "rusty" in that combination and triggered a couple of
old bug reports.
Heavy iron balls and iron chains can have rust repaired and can
be made rustproof by wielding, then reading enchant weapon while
confused, as if they were weapons.
"Looting many containers via menu cannot be stopped". When the
player uses #loot command at a location with multiple containers,
a menu of which ones to loot is presented and player can pick any
or all of them. But if you terminate the looting of a particular
container with ESC, it goes on to the next selected one rather than
stopping the loot action because that's what the 'q' choice does.
The simplest fix would be to allow choosing only one container
from the "loot which?" menu, but this retains the ability to loot
multiple containers on a pile in one turn. It makes looting
stoppable by extending the ":iobrsq or ?" prompt, adding 'n' for
"next container" and changing 'q' from "done with this container"
to "done looting" (with ESC still a synonym for 'q'). When just
one container is being looted, or when on the last of N containers,
'n' is not shown but is still accepted (and treated as 'q').
Also, use_container() was using a menu for ":iobrsq" if player had
menustyle set to Full when it was intended to be for Partial (name
confusion...). This switches Partial to use menu for loot action,
and leaves Full with that since that's how 3.6.0 has been behaving.
Traditional and Combination use the prompt string and single char
response.
Umpteenth revision of the X11 extended command menu. Add a new
resource to NetHack.ad to control its initial size.
I still hope there's a better way to do this, but this is my last
shot at it.
Let monsters who have a weapon attack for non-physical damage dish
out physical damage instead of doing the drain life or drain
strength they usually do if they happen to be wielding cockatrice
corpses or a couple of particular aritfacts that do more harm
than just level drain. (Other artifacts are candidates, but I
don't think it's worth checking for them since the monsters
involved have such a small chance of acquiring and wielding them.)
Also switch to physical if monster's ability has been cancelled.
Only barrow wight, Nazgul, and erinys are affected. Yeenoghu and
the Master Assassin have a weapon attack for physical damage and
another one for non-physical damage (not necessarily delivered in
that order). They haven't been changed--only the physical damage
attack has a chance to apply their weapon's special damage.
Lawful angels deliver taunt messages from a pool of messages which
might mention the lawful god; demons and non-lawful angels draw from
another pool which doesn't mention any gods. Since it is odd for a
'renegade' angel to claim to be operating for its god, choose taunts
from the other pool of messages for renegade lawful angels.
Not related: some formatting fixups in include/mextra.h.
Two different reports complaining that having the Wizard steal the
hero's quest artifact is a bad thing. This doesn't change that,
but it does make all quest artifacts become equal targets so that
wishing for other roles' artifacts doesn't offer such a safe way to
have whichever special attributes they provide.
Quest artifacts are actually higher priority targets for theft than
the Amulet. I suspect that probably wasn't originally intended,
but I left things that way. Taking quest artifacts leaves the hero
more vulnerable to future thefts, and once they're gone the Amulet
has priority over the invocation tools.
