The hangup check added to xwaitforspace() (which gets tty user's
response to --More-- and "Press Return to continue: ") wouldn't be good
enough if hangup occurred while that routine's input loop was executing.
NOSAVEONHANGUP isn't documented anywhere. I don't see why it should
wipe out recoverable level files just because it doesn't want to build a
save file out of them during the hangup. Leave them intact if checkpoint
is active. If someone really wants to make them always go away, they'll
need to disable INSURANCE as well as enable NOSAVEONHANGUP.
tty's getret() -> xwaitforspace() could get stuck in a loop after
hangup, depending upon the state of terminal shutdown (accepting EOF or
ESC cares about cbreak mode?). Make xwaitforspace() become a no-op during
hangup processing.
vms's call to hangup() from an exit handler took place after the
terminal has been reset (the exit handler for the latter is registered
later so executes sooner). Then exit_nhwindows() resulted in a second tty
reset attempt and settty() -> setctty() encountered an error (which it
reported, triggeting a getret() call). Make the vms code correctly guard
against multiple resets.
A recent change to force gold in inventory (during multi-item Drop or
applying/looting containers) to have '$' for its inventory letter for the
!GOLDOBJ configuration has revealed a bug which 3.4.3 has for the GOLDOBJ
configuration. Specifying a count followed by '$' to use a subset of
carried gold didn't work under tty; the $ was treated as a group accelator
and overrode the count, so full stack was always used. (The code a few
lines above this which counts the occurrences of group accelators already
includes this same fix: ignore an item's group accelator when it matches
the selector.)
I wouldn't be surprised if other interfaces are subject to the same
problem; since I can't test those I'm not attempting to fix them blindly.
Typing a response at the "Who are you?" prompt didn't allow digits in
the character's name under Unix and VMS; something like "arc15" came out
as "arc__". This allows them to be used anywhere except for the first
character. "arc15" now works; "15arc" ends up as "_5arc" so that there
still won't be a leading digit abutting the uid value when they're joined
to form the save file name.
Move the code to use a nethack menu for restoring a saved game. It
was inline in tty_askname() but is now a separate routine, restore_menu()
in restore.c. There was no port-specific code and only a small amount of
tty-specific code; it should be useable by anyone (but Qt doesn't have to
switch over if it doesn't want to).
The original behaved strangely if there were exactly 26 saved chars;
the "start new game" menu entry ended up using "{" as selection character.
There wasn't any comparable problem at 52; it was limiting the menu to 51
games. Now it will allow 52 (with "start a new game" bumped into "#" if
there are that many), and adds an explicit quit entry (unless there are
52 or more games so that # is already used by new-game, then quit remains
implicit rather than resort to some other none-of-the-above character).
Explicitly truncate the query prompt string to QBUFSZ-1 characters.
For tty and Amiga, no longer include the choices and default within that
length limit; use a bigger buffer to hold them along with the prompt.
[See cvs log for doc/window.doc for more details.]
This patch attempts to add some levels of unicode support
to NetHack.
The master on/off switch for any Unicode support is
defining UNICODE_SUPPORT in config.h. Currently
there is code support for two subsets of unicode support:
UNICODE_DRAWING
If UNICODE_DRAWING is defined, then the data
structures used to house drawing symbols are expanded
to the size of wchar_t, big enough to hold unicode characters.
A typdef called `nhsym' is involved and if UNICODE_DRAWING
is defined, it is wchar_t, otherwise it is uchar.
UNICODE_WIDEWINPORT
If UNICODE_WIDEWINPORT is defined, then the data
structures inside the window port are expanded to the size of
wchar_t, big enough to hold unicode characters. Both map
symbols and text within the window port are expanded, in order
for potential support for displaying multinational characters some
day, but this patch only provides viewing of map symbols.
A typdef called `nhwchar' is involved and if UNICODE_WIDEWINPORT
is defined, it is wchar_t, otherwise it is char.
The only window port with code support for UNICODE_WIDEWINPORT
currently is the TTY port. Don't enable UNICODE_WIDEWINPORT
unless:
- it is a TTY port
- the underlying platform specific routines can
handle the larger data structures.
Don't enable UNICODE_SUPPORT unless:
- your compiler can handle wchar_t.
- your compiler can accept L'a' characters.
- your compiler can accept L"wide" strings.
Note that if your compiler can handle the above, you could
enable the larger data structures (currently if TTY) even if your
platform can't actually display unicode or UTF-8, by messing
with u_putch() in win/tty/wintty.c to only deal regular chars.
That should be the only function that actually pushes wide characters
out to the display.
If you enable UNICODE_SUPPORT, and your platform is capable
you will need to turn on the unicode run-time option to be able to
load unicode character sets from the symbol file, to be able to
push unicode characters to the display. You'll also want to load
a unicode symbol set once the unicode option is toggled on. In
a config file you would do that via these two lines:
OPTIONS=unicode
OPTIONS=symset:Unicode_non_US
The repository was stamped with NETHACK_PRE_UNICODE
prior to applying this patch, and stamped with
NETHACK_POST_UNICODE afterwards. The code differences
between those two tagged versions are this patch.
Add putmixed() to the window port. It allows map symbols to
be included in the string by encoding them in a unique fashion.
This was done because Unicode symbols, for instance, could be
longer than the size of a char.
The encoding of the map symbols in this patch is done by
prefixing a glyph value with \GXXXX, where XXXX is a
random value for the current game. The reason for the random
prefix is to minimize the possibility that a player can trigger
the escape sequence processing within text under their control
(dog names, etc.) the way they could if the sequence was fixed
in the source code. The random prefix remains the same throughout
the lifetime of a game because message window strings are
saved in the save file.
(There was actually a bug present because of the embedded
character even before the recent symbol changes, because if
someone was using a different set of characters between games,
the saved messages would reflect the original characters, rather
than the current. That bug was introduced with the ability to
save messages to the savefile.)
A window port does not have to supply an XXX_putmixed() routine,
it can use genl_putmixed() which uses the old behavior of
embedding the sequence as a character within the string
and calling putstr(). genl_putmixed() takes care of the decoding
of the escape sequence.
This also #ifdef's out code in pager.c for converting a glyph
to a character, and uses mapglyph() to do that instead. Does
anyone see a problem with doing that through mapglyph instead
of repeating similar code within pager.c?
Pat wrote:
> <Someone> has a patch (we've added a couple of
> his earlier ones) which changes the statue display from a single
> one size fits all "`" to a gray monster symbol instead.
> But I think the idea is a good one, and along with the
> bouldersym option could make the fairly hard to
> distinguish back-tick character go away.
Sources tagged before applying NETHACK_PRE_STATUE,
and afterwards with NETHACK_POST_STATUE for easy
rollback.
- reduce the number of symbol tables for each graphics
set {PRIMARY, ROGUESET} from three {map, oc, mon}
tables for each of the display symbols, the loadable symbols,
and the rogue symbols, to one continguous table for
each:
showsyms: the current display symbols
l_syms: the loaded, alterable symbols
r_syms: the rogue symbols
- Modify mapglyph so that the index into the symbolt table is
available as a return value (it was a void function), rather than
just the char converted from the glyph.
- That makes it possible for a window port to use the same
index value to extract from another table (perhaps a unicode
table) for a different set of display symbols. The index
is much more useful than trying to convert the character
into another type of symbol, as some contributed patches
have done.
- It is much easier to load a single alternative flat table to
make substitutions, since the corresponding value just
has to get placed into the same index offset in the
alternative table.
This also fixes a bug I found in botl.c, where you could
go to the rogue level, and the bottom line gold symbol
was not being updated with the new character as it should.
The reason was because the gold value had not changed,
only the field symbol used had changed.
This updates multiple ports to place a (void) cast on
the mapglyph call, now that it returns a value, so this
is going to generate a lot of diff e-mails.
This is an overhaul to the NetHack drawing mechanism.
- eliminates the need to have separate lists in drawing.c
for the things and their associated explanations by grouping
those thing together on the same inializer in a struct.
- replaces all of these options: IBMgraphics, DECgraphics, MACgraphics,
graphics, monsters, objects, boulder, traps, effects
- drawing.c contains only the set of NetHack standard symbols for
the main game and a set of NetHack standard symbols for the
roguelevel.
- introduces a symbols file that contains named sets of
symbols that can be loaded at run time making it extensible
for situations like multinational code pages like those reported
by <Someone>, without hardcoding additional sets into the game code.
- symbols file uses names for the symbols, so offsets will not break
when new things are introduced into the game, the way the older
config file uchar load routines did.
- symbols file only contains exceptions to the standard NetHack
set, not entire sets so they are much less verbose than all of
the g_FILLER() entries that were previously in drawing.c
- 'symset' and 'roguesymset' config file options for
preselecting a symbol set from the file called 'symbols'
at startup time. The name of the symbols file is not under the
users control, only the symbol set name desired from within the
symbols file is.
- 'symset' config file option loads a desired symbol set for
everything but the rogue level.
- 'roguesymset' config file option loads a desired symbol set
for the rogue level.
- 'SYMBOLS' config file option allows the user to specify replacement
symbols on a per symbol basis. You can specify as many or as few symbols
as you wish. The symbols are identified by a name:value pair, and line
continuation is supported. Multiple symbol assignments can be made on
the same line if each name:value pair is separated by a comma.
For example:
SYMBOLS = S_bars:\xf0, S_tree: \xf1, S_room:\xfa \
S_fountain:\xf4 \
S_boulder:0
- 'symbols' file has the following structure:
start: DECgraphics
Handling: DEC
S_vwall: \xf8 # meta-x, vertical rule
S_hwall: \xf1 # meta-q, horizontal rule
finish
start: IBMgraphics
Handling: IBM
S_vwall: \xb3 # meta-3, vertical rule
S_hwall: \xc4 # meta-D, horizontal rule
finish
- 'symbols' file added to the source tree in the dat directory
- Port Makefiles/scripts will need to be adjusted to move them into
HACKDIR destination
I noticed that the NetHack version being reported in the
system's event log was old:
Faulting application nethackw.exe, version 3.4.2.0,
faulting module nethackw.exe, version 3.4.2.0, fault address 0x001648eb.
Move some internals-related code out of port-specific main so that
it isn't duplicated a bunch of times. One minor side-effect of this
change is that if you auto-pickup something at the very start of a game,
it will happen after any full moon/new moon/Friday 13th message rather
than before. There's a second change for some: the shared main() used
by several of the micro ports had a small difference in game play--if you
saved a game while on an engraving, it would automatically be read when
you resume--that will now occur for everybody [Elbereth weenies rejoice!].
pcmain() was also calling update_inventory() at start of play. That's
unnecessary for new games, where inventory initialization triggers a call
to it for each item added to your pack; but I wasn't sure about restored
games, so everybody gets it there now.
The Mac and BeOS ports evidently haven't been touched it some time;
they still referenced flags.move which got replaced by context.move quite
a while back. The Windows GUI code has a declaration for mswin_moveloop()
which appears to be non-existant, but I left it alone. I assume that the
Qt interface uses the existing main() routines; at least I couldn't find
any start of game code specific to it. vmsmain's revised main() is the
only one which has been tested.
From a bug report: fix a typo for mouse
position handling in set_button_values(). I have no way to test this,
nor can I tell whether it could have ever impacted anyone. The old code
clearly had a mistake and the fix is obvious.
On Mon, 03 Jan 2005 12:04:29 +0000, <email deleted> wrote:
> Dear NetHack win32 developers,
>
> This bug does not affect the win32 binaries that you distribute but it
> does affect NetHack 3.4.3 if I build it from source. The difference may
> be due to different compilers or whatever. I'm using mingw32-gcc v3.2
>
> I don't quite understand what's going on (I never was much good at
> win32 programming), but it appears that the WM_KEYDOWN message for
> AltGr-4 is being translated into a WM_CHAR message with a wParam of
> 128. I don't understand why that should be, but anyway. The problem
> then occurs when NetHack casts wParam to char which, since char is
> signed, gives -128. onListChar() then passes -128 to isdigit() which
> causes the crash. The fix appears to be to simply drop the cast:
Also
> <email deleted>
> Newsgroups: rec.games.roguelike.nethack
> Subject: Changing tile set for item list?
> Date: 1 Jan 2005 20:03:08 -0800
> <email deleted>
>
> I'm using the windows interface for Nethack 3.4, and I've successfully
> changed the tileset used by changing defaults.nh. The only problem is,
> the item list (i.e. The list that comes up when I press "i") still uses
> the old tiles. Is there any way to change the list so it uses the new
> tiles? I've searched the guidebook to no avail. I'm debating if it is
> even possible.
>
> Thanks for the help,
> -Zmann
trunk patch:
- menu: display custom tiles if map is not ASCII
- menu: display '-'/'+'/'#' in place of a tile if map is ASCII
- fix isdigit() crash on AltGr-4 with mingw
It looks kinda weird with huge tiles (e.g. absurd96) but that could
be just me. Comments/suggestions are welcome.
-<Someone>
- always write plname into save file, no longer conditional
- add 'selectsaved' wincap option to control the display of
a menu of save files for ports/platforms that support it.
- add support for win32 tty using normal nethack menus.
- the win/tty/wintty code is generalized enough that any
tty port could support the option if the appropriate port-specific
code hooks for wildcard file lookups are added to src/file.c
specifically in the get_saved_games() routine. There is posix
code in there from Warwick already, and there is findfirst/findnext
code in there from win32. Warwick has the posix code only
enabled for Qt at present, but with wintty support, that could be expanded
to other Unix environments quite easily I would think.
Here is what the tty support looks like:
NetHack, Copyright 1985-2005
By Stichting Mathematisch Centrum and M. Stephenson.
See license for details.
Select one of your saved games
a - Bob
b - Fred
c - June
d - mine3
e - Sirius
f - Start a new character
(end)
The following files existed in the NetHack SAVEDIR directory
at the time:
ALLISONMI-Bob.NetHack-saved-game
ALLISONMI-Fred.NetHack-saved-game
ALLISONMI-June.NetHack-saved-game
ALLISONMI-mine3.NetHack-saved-game
ALLISONMI-Sirius.NetHack-saved-game
Note that despite the file names, the actual character name
is drawn from the savefile.
The WIN32CON support passes
USER-*.NetHack-saved-game
to findfirst/findnext where USER is your login name of course.
This isn't really a bug, but I find it does make the map scrolling in
the generic X11 version a lot less distracting. The original behavior
produces certain boundaries where, when the cursor moves back and forth
across that boundary, the map scrolls with each crossing. This is
particularly annoying in places like Sokoban where the player makes that
kind of movement frequently causing large jumps of the map each time.
Changing the border and delta constants in winmap.c as below eliminates
that behavior, as well as making the cursor easier to track by tending
to recenter it whenever the map shifts.
It appears that the Athena text widget in recent XFree86 distributions
does not properly honor the XawtextScrollWhenNeeded flag, so the text
widget created by X11_display_file() does not have a vertical scroll bar
when the text does not entirely fit in the window. I have seen this bug
in XFree86 versions from 4.0.2 through 4.3.0. Using XawtextScrollAlways
for the vertical scrollbar ensures it will always appear.
This provides the core support needed for status field highlighting.
This patch doesn't actually perform status field highlighting for any port,
but provides the core hooks for doing so.
The syntax is:
OPTIONS=hilite_status:{fieldname}/{threshold}/{below}/{above}
where {fieldname} is the name of a status field.
{threshold} is the value used as the threshold to trigger a display
change. It can also be set to "updown" to trigger
a display change whenever it rises or whenever it falls.
If you end the threshold value with %, then it signifies
that you want to trigger the display change based on the
percentage of maximum.
{below}, {above}
are the color or display attribute that you want to use when
the field value is underneath the threshold. Supported display
fields are: normal, inverse, bold, black, red, green,
brown, blue, magenta, cyan, gray, orange,
bright-green, yellow, bright-blue, bright-magenta,
bright-cyan, or white.
Valid field names are:
alignment, armor-class, carrying-capacity,
charisma, condition, constitution, dexterity,
dungeon-level, experience-level, experience,
gold, HD, hitpoints-max, hitpoints, hunger,
intelligence, power-max, power, score,
strength, time, title, wisdom
Refer to window.doc for details. Guidebook updates to come later.
Introduction of a new set of window port status display
routines. The new routines are conditional on
STATUS_VIA_WINDOWPORT
being defined in config.h. See the experimental section,
where the #define resides for the time being.
<Someone> discovered that it is possible to
have wins[WIN_MESSAGE] be null during
a hangup, not sure why yet.
Put a guard in to prevent de-referencing a null pointer.
This brings things much closer to correct operation (I hope).
- The shift to only moving the cursor on input (<Someone>'s
changes) had a lot of complications, among them was
that sometimes, there is no more input. When the program was
exiting, or bombing the cursor synch never got done, so the
final messages could end up strewn any place the cursor
happened to be dwelling.
- There were two competing output systems in use: the
wintty stuff for the game, and the msmsg and error stuff
used by the sys/share/pcsys, sys/share/pctty, and
sys/share/pcunix routines. Those were meant to mimic
output to stdout, where stuff just got sent to a sequential
display. Over time, there were calls mixed in that depended
on the cursor tracked stuff from the core game, so you
really couldn't be sure where things were going to display.
It wasn't as much of an issue before, because the cursor
really did get moved around as expected. Everything
now ends up in the same output system.
- I even found a use of the real putchar() because
sys/share/pcunix didn't #include wintty.h the same
as the other files, and the macro never got defined.
Who knows where that character was being put -
the game certainly couldn't track it.
While everything I knew to be wrong yesterday is
now working, there may be some other glitches
lurking that I haven't discovered yet.
Please: test, test, test.
<Someone> wrote:
> Using the MCVS IDE I couldn't compile NetHack any longer, due to a
> misplaced #endif and a library not included in the DSP file.
> Here's a patch for both problems for 3.5.0.
> The 3.4.x verison only suffered from the first problem. Patch also
> attached.
There were still some significant startup message problems
with win32tty.
I've spent a lot of time in the debugger tracing through them all.
I think I've got them all worked out now, certainly the ones that
I was aware of. There may be some I haven't discovered.
Testing welcomed of course!
This patch also attempts to diagnose the error where someone tries
to execute NetHack directly out of a zip file, and provide
them with a (hopefully) helpful message similar to what we
might end up telling them if they wrote in. If you want
to test that part, you can comment out the line in the
Makefile that adds "dungeon" to nhdat, and delete the nhdat
in your binary and src directories, and "make install".
Then add the value of your TEMP environment variable as a
DATADIR statement in defaults.nh (here's mine):
DATADIR=C:\DOCUME~1\ALLISO~1\LOCALS~1\Temp
The diagnostic code engages if the game fails to open
dungeon. It then checks to see if it the game dir is the
TEMP directory for your system, and if so it prints the
message.
the win32 cursor restriction stuff messed up any
messages displayed during abnormal start conditions
where the window system never got initialized properly.
among them:
- messages relating to lock files or games in progress
- dungeon errors
- early panic messages
I noticed a few panic messages contained newlines, and one included a naked
carriage return. panic() adds a newline itself, and also generally ensures
the message will be on a new line (the initial "oops" ensures the message
itself will be on a new lines). This patch removes the unneeded characters.
