Teleporting a monster only updated the map. Give a message
so blind players can get the same information.
Making a monster invisible gives the same message, if you
cannot detect invisible.
Several other places where monsters teleported themselves
now also give the same message.
Keep track of the highest value that u.uhpmax and u.uenmax have
attained, in new u.uhppeak and u.uenpeak. They aren't used for
anything yet. u.mhmax (max HP while polymorphed) isn't interesting
enough to track.
Not save and bones compatible so increments EDITLEVEL.
Reported by entrez: applying a bullwhip towards a medium or small
peaceful monster used to be an attack but that stopped working when
'safepet' was extended to peacefuls in order for the hero to be able
to swap places which those. Also, side-effects were different when
hero applied the whip from within a pit compared to when not in one.
This allows the hero trapped in a pit to try to snag furniture or a
boulder even when a small or medium is present, and escaping that
pit if successful. (It still snags big monsters in preference to
furniture/boulder at their location.) When no such non-monster
target is available, it attacks the monster if hostile or peaceful
but not when tame. When revealing a previously unseen monster it
prevents snagging that monster's wielded weapon because hero couldn't
possibly target the weapon in that situation.
This makes other changes, mostly dealing with finding and exposing
concealed monsters, which may introduce some new bugs.
Since I was already in the right place, implement snagging an item
off the floor while flying. It isn't necessary since a flyer can
pick things up off the floor directly, but there isn't any pressing
reason to disallow it. Supersedes the commit in pull request #632
by RojjaCebolla.
Closes#632
Solve the uneven distribution situation that has been present for
picking random rumors for a long time and for random engravings,
epitaphs, and hallucinatory monster names since 3.6.0. This relies
on the previous partial solution where short lines have been padded
to a longer length. When that length is N and random seek lands in
a long line of length L, retry if the position is in the first L-N
characters. Put differently, it if takes more than N characters to
reach the next newline, reject that random seek and try again. This
effectively makes long lines behave as if they had the same length
of N as the short lines have been padded to and when all lines are
the same length, all entries have the same chance to be chosen.
Give a better message than "Unknown config statement" if SOUNDDIR or
SOUND directives are found in the configuration file being loaded by
an executable built without support for USER_SOUNDS. And just give
it for the first occurrence since when present there will likely be
multiple SOUND instances.
It doesn't attempt to deal with the case where the current interface
does not support sound but USER_SOUNDS is enabled because another
interface in the same executable does.
We've had a few pull requests fixing format/argument mismatches
lately. I did't notice when PRINTF_F(format_index,first_arg_index)
attribute use and the checking gcc and clang do with it got removed,
but that was very useful. Putting it back triggers a whole bunch
of "format string is not literal" warnings, but that's because
'-Wformat-nonliteral' was explicitly added to the *.2020 hints.
Checking pline/You/&c arguments in the cases where the format is a
literal is more valuable than the complaints for sprintf being fed
a generated format, so reinstate PRINTF_F usage and turn off the
check for non-literal format strings.
A shop-owned glob picked up by the hero was added to shop's bill
and if that shrank to nothing it moved from the unpaid portion to
used-up portion as intended. But once there it retained obj->owt
of 0 and if 'sanity_check' was enabled, that triggered a warning
every move until finally paid for. Both the 'Ix' list of used-up
items and itemized shop billing revealed a weight of 0 aum if
'wizweight' was enabled.
Keep track of the weight a glob had when it becomes unpaid, then
reset from 0 to that amount if it becomes used-up. This overloads
the obj->oextra->omid field which is an unsigned int previously
only used for corpses. Now for globs it is pre-bill obj->owt which
is also unsigned int. I didn't add new oextra access functions for
it; it is only used in two places and existing omid ones suffice.
Function the() wasn't supposed to be used for monsters because many
of the ones with capitalized names confuse it, but over time multiple
instances of the(mon_nam()) have crept into the code. Instead of
ripping those out, modify the() to handle that situation better.
Pull request #636 by entrez dealt with this with one extra line of
code, but could end up scanning all the names in mons[] repeatedly
if the("Capitalized string") gets called a lot. This uses a similar
one line fix but calls a whole new routine that scans through mons[]
once collecting all the relevant special case names. As a bonus,
it does the same for hallucinatory monster names which name_to_mon()
couldn't handle.
Fixes#626
Incorporate the functionality of the loadable DLL's (nhraykey.dll,
nhdefkey.dll, and nh340key.dll) into the consoletty.c code and
remove the dll building
Globs never rotted away but did become tainted after a relatively
short while, which seemed like a contradiction. Change them to never
be tainted but shrink by 1 unit of weight approximately every 25
turns. An ordinary glob (one that hasn't combined with any others)
starts out weighing 20 units, so it takes about 500 turns to vanish.
That's roughly twice as long as a corpse takes to rot away.
Shrinking globs give feedback when in hero's invent or in a container
in hero's inventory, but rarely (when going from an exact multiple
of 20 weight units; that is, from integral number of N globs to
N-1 + 19/20, or if weight reduction triggers an encumbrance change).
When a glob goes away completely, there is feedback for those two
circumstances and also for seeing the glob vanish from the floor.
I haven't touched how much nutrition eating a glob confers. I have
changed formatting of glob names to use "small", "medium", "large",
"very large" instead of "small", [no adjective], "large", &c. You
still need to have at least five globs coalesced together for the
adjective to become "medium", same amount as before.
I don't think EDITLEVEL needs to be modified but have incremented it
anyway to play things safe.
I thought there were more places that checked for "it" and substituted
"someone" or "something". Perhaps there are and I'm just not finding
them now. Anyway, this extends x_monnam() and adds some_mon_nam() and
Some_Monnam() to do that during monster name formatting instead of
having various bits of code try fix it up after the fact. The fixups
could be fooled by monsters given the name "it" or "It"; x_monnam()
won't be.
Reported by eakaye. Selection of equipment when creating a soldier
or watchperson can pick a polearm, but random selection among those
had a chance to choose dwarvish mattock which doesn't use polearms
skill and isn't appropriate for a human soldier or watchperson.
Not mentioned, but lance was in the same boat.
Change the selection to only pick something which uses polearms
skill, then make that moot by moving lance and dwarvish mattock out
of the midst of the polearms so that they're no longer candidates
for special case rejection.
A couple of other things which might have had a similar issue were
already ok. Giving a polearm when creating a troll selects between
a few choices rather than among all the polearms. And wishing for
"polearm" only considers items which use polearms skill.
While changing objects.h to reorder the two non-polearms, I removed
a bunch of tabs that were present in the scroll definitions.
EDITLEVEL is incremented due to objects[] reordering, so existing
save and bones files will be invalidated.
Fixes#623
Reported by entrez, wielding something fragile (potion of acid
perhaps), and using F to smash it against iron bars called breaktest()
directly, then a second time indirectly through hero_breaks() via
hit_bars(). There is a random chance to resist breaking (99% for
artifacts, 1% for other items) so breaktest() might say that something
will break on the first call and that it will not break on the second
call, or vice versa. That could remove uwep from inventory then leave
it in limbo without destroying it, or destroy uwep without removing it
from inventory first triggering impossible "obfree: deleting worn obj".
whitelist the valid cases showing up
If an earlier version of clang is showing more cases (particularly
if they don't make sense), the re-enabling of the warning in
sys/unix/hints/include/compiler.2020 can be made clang-version
specific instead. I had no way to test earlier versions.
On 59818fb, MAX_RADIUS was changed from 15 to 16 to intend to support
"radius 0". But MAX_RADIUS doesn't means the range but outer bound of
the radius table, so it should not be changed, and this change led
possible out-of-bound access on view_from() and do_clear_area() in
vision.c.
This commit reverts the change and avoids the problem.
Reported directly to devteam by entrez via email:
>
> I noticed some potential issues with (melting) ice:
>
> * Digging down into ice, or setting a land mine on the ice and
> triggering it, doesn't remove the melt_ice timeout, so it can result
> in a sequence like dig down -> pit fills with water -> freeze water
> -> freezing water tries to set melt_ice timeout -> duplicate timeout
> impossible. Or if you don't freeze the water again, melt_ice will
> run on a non-ice surface, which might at least produce strange
> messages.
>
> * Setting a land mine on ice: melting ice doesn't do anything with
> the trap, so there is still a land mine which you can trigger by
> flying over the water (the land mine's trigger is also still
> described as being 'in a pile of soil', despite being underwater at
> this point). Similar thing happens with bear traps.
>
> * Not really related to _melting_ ice, but an exploding land mine
> doesn't reset the typ from ICE to FLOOR (like normal digging does),
> so it will result in a square with a pit that is also an ice square,
> where the ice can melt under the pit and produce a combination
> pit/moat. If you then freeze the moat, the pit reappears on top of
> the ice.
Fix the vault repair issue that could lead to "wall_angle: unknown"
warning. Unlike shop repair, the original wall info isn't available
so this recreates it. The extra 'flags' field added yesterday could
be eliminated but this leaves it in place.
Fixes#606
triggering an impossible warning about "wall_angle: unknown" due
to the known conflict between door state and wall info which both
overlay the flags field for map locations.
Reported and diagnosed by vultur-cadens: if a shop's wall was dug
open, followed by use of locking magic to plug the gap with a door,
and then unlocking that door, the D_CLOSED door flag was left as
invalid wall_info when shop damage was repaired. Map re-display
complained. Leaving the door locked or opening it after unlocking
did not result in any complaint because the values for those door
states do not conflict with wall angle values.
The problem was reproducible and is now fixed by adding an extra
field to the shop damage structure. A similar change has been
made to the vault guard's 'fake corridor' structure but I have no
test case for that so don't know whether it makes any difference.
At least it doesn't seem to have broken anything.
Existing save and bones files are invalidated by the fixes.
Fixes#606
When you push a pile of boulders, describe the second and remainder
as "the next boulder" rather than just "the boulder". Matters most
when pushing into water or lava and you keep on pushing when the
first one or more sink into the pool or plug it, but also matters
for an ordinary push where the top-most one moves successfully and
then blocks the continuation attempt to push the second one. It was
somewhat confusing when all the messages said "the boulder" whether
they were referring to the same boulder or different ones.
Multiple pushes on the same move has always been a bit odd, but this
doesn't change that, just the feedback it generates.
Get rid of the last reference to 'g.restoring' (which managed to
unintentionally survive the change to 'g.program_state.restoring').
Also have suppress_map_output() check 'g.program_state.saving' and
switch the couple of checks against that flag to use the function.
Eliminate a couple of compile warnings produced when DEF_PAGER is
defined: unixmain.c: g.catmore=DEF_PAGER; wintty.c: fd=open(...).
Override its use when DLB is also defined since an external pager
could access 'license' but not 'history', 'opthelp', &c when those
are in the dlb container file.
In the commented out value for DEF_PAGER, show a viable value for
the default configuration these days.
for helm of opposite alignment.
Discovered and described by vultur-cadens.
The #adjust command can be used to split an object stack and if the
shop price of the two halves are different, the new stack will have
its obj->o_id modified to make the prices the same. That could be
used to tip off the player as to what the low bits of the next o_id
will be. Since no time passes, no intervening activity such as
random creation of a new monster can take place, so the player could
wish for something that depends on o_id with some degree of control.
Matters mainly for helms of opposite alignment intended to be used
by neutral characters since the player isn't supposed to be able to
control that. (Other items like T-shirt slogan text and candy bar
wrapper text had a similar issue but controlling those wouldn't have
had any tangible difference on play.)
The issue writeup suggested allowing the player to specify a helm's
alignment during a wish. That would defeat the purpose of having
o_id affect the helm's behavior in an arbitrary but repeatable way
so is rejected.
I implemented this fix before seeing a followup comment that suggests
using a more sophisticated decision than 'obj->o_id % N' for the
arbitrary effect. This just increments context.ident for the next
obj->o_id or mon->m_id by 1 or 2 instead of always by 1 and should
be adequate. It also has the side-effect that two consecutive wishes
for helm of opposite alignment won't necessary give one for each of
the two possible 'polarities', even with no intervening activity by
monsters, reinforcing the lack of player control.
Minor bonus fix: it moves the incrementing check for wrap-to-0 into
a single place instead of replicating that half a dozen times. Ones
that should have been there for shop billing and for objects loaded
from bones files were missing.
Fixes#596
The 5 glyphs are now unaligned_altar, chaotic_altar, neutral_altar,
lawful_altar, and high_altar. The latter is only mapped if you are
on astral or sanctum levels.
sp_lev.c: In function ‘lspo_altar’:
sp_lev.c:3962:9: warning: declaration of ‘shrine’ shadows a global
declaration [-Wshadow]
3962 | int shrine;
| ^~~~~~
In file included from ../include/hack.h:217,
from sp_lev.c:14:
../include/display.h:959:5: note: shadowed
declaration is here
959 | shrine
| ^~~~~~
The gas will expand from its chosen center point via breadth-first
search instead of hardcoding a diagonal shape. The search is performed
with a randomized list of directions, and has 50% chance of not spreading
to a space it otherwise would have spread to. This has the effect of fuzzing
the cloud edges in open areas, helping the clouds on, for instance,
the Plane of Fire not be big rhombuses.
Also some other code refactoring related to stinking clouds in read.c
This comes from xNetHack by copperwater <aosdict@gmail.com>
The walls for the mines, gehennom, knox, and sokoban had been
changed at the "tile"-level, with no awareness of the core game,
or non-tile interfaces.
- Expand the glyphs to include a set of walls for the main level
as well as each of those mentioned above.
Altars had been adjusted at the map_glyphinfo() level to substitute
some color variations on-the-fly for unaligned, chaotic, neutral,
lawful altars, and shrines. The tile interface had no awareness of
the feature.
- Expand the glyphs to include each of the altar variations that
had been implemented in the display code for tty-only. This required
the addition of four placeholder tiles in other.txt. Someone with
artistic skill will hopefully alter the additional tiles to better
reflect their intended purpose.
Explosions had unique tiles in the tile window port, and the display
code for tty tinkered with the colors, but the game had very little
awareness of the different types of explosions.
- Expand the glyphs to include each of the explosion types: dark,
noxious, muddy, wet, magical, fiery and frosty.
Pile-markers to represent a pile had been introduced at the
display-level, without little to no awareness by the core game.
- Expand the glyphs to include piletops, including objects,
bodys, and statues.
Recently male and female variations of tiles and monsters had been
had been introduced, but the mechanics had been mostly done at the
display-level through a marker flag. The window port interface then
had to increment the tile mapped to the glyph to get the female version
of the tile.
- Expand the glyphs to include the male and female versions of the
monsters, and their corresponding pet versions, ridden, detected
versions and statues of them.
Direct references to GLYPH_BODY_OFF and GLYPH_STATUE_OFF
in object_from_map() in pager.c were getting incomplete results.
- Add macros glyph_to_body_corpsenm(glyph) and
glyph_to_statue_corpsenm(glyph) macros for obtaining the corpsenm
value after passing the glyph_is_body() or glyph_is_statue() test.
Other relevant notes:
- The tile ordering in the win/share/*.txt tile files has been altered,
other.txt in particular.
- tilemap.c has had a lot of alterations to accommodate the expanded
glyphs. Output that is useful for troubleshooting will end up in
tilemappings.lst if OBTAIN_TILEMAP is defined during build.
It lists all of the glyphs and which tile it gets mapped to, and also
lists each tile and some of the references to it by various glyphs.
- An array glyphmap[MAXGLYPH] is now used. It has an entry for each
glyph, ordered by glyph, and once reset_glyphs(glyph) has been run, it
contains the mapped symindex, default color, glyphflags, and tile
index.
If USE_TILES is defined during build, the tile.c produced from the
tilemap utility populates the tileidx field of each array element with
a glyph-to-tile mapping for the glyph. Later on, when reset_glyphmap()
is run, the other fields of each element will get populated.
- The glyph-to-tile mapping is an added field available to a window
port via the glyphinfo struct passed in the documented interface. The
old glyph2tile[] array is gone. The various active window ports that
had been using glyph2tile[] have been updated to use the new interface
mechanism. Disclaimer: There may be some bug fixing or tidying
required in the window port code.
- reset_glyphmap() is called after config file options parsing
has finished, because some config file settings can impact the results
produced by reset_glyphmap().
- Everything that passes the glyph_is_cmap(glyph) test must
return a valid cmap value from glyph_to_cmap(glyph).
- An 'extern glyph_info glyphmap[MAX_GLYPH];' is inserted into the
top of only the files which need awareness of it, not inserted into
display.h. Presently, the only files that actually need to directly
reference the glyphmap[] array are display.c, o_init.c (for shuffling
the tiles), and the generated tile.c (if USE_TILES is defined).
- Added an MG_MALE glyphflag to complement the MG_FEMALE glyphflag.
- Provide an array for wall colorizations. reset_glyphmap() will draw
the colors from this array: int array wallcolors[sokoban_walls + 1];
The indices of the wallcolors array are main_walls (0), mines_walls
(1), gehennom_walls (2), knox_walls (3), and sokoban_walls (4).
In future, a config file option for adjusting the wall colors and/or
an 'O' option menu to do the same could be added. Right now, the
initializaton of the wallcolors[] array entries in display.c leaves the
walls at CLR_GRAY, matching the defsym color.
- Most of the display-level kludges for some of the on-the-fly
interface features have been removed from map_glyphinfo() as they
aren't needed any longer. These glyph expansions adhere more closely to
the original glyph mechanics of the game.
- Because the glyphs are re-ordered and expanded, an update to
editlevel will be required upon merge of these changes.
Use a slightly more meaningful name for each one rather than
a sequential numerical name.
S_explode1 to S_expl_tl
S_explode2 to S_expl_tc
S_explode3 to S_expl_tr
S_explode4 to S_expl_ml
S_explode5 to S_expl_mc
S_explode6 to S_expl_mr
S_explode7 to S_expl_bl
S_explode8 to S_expl_bc
S_explode9 to S_expl_br
When using a menu to drop or put in items into a container,
allow putting in the item (or items) you picked up previously,
by selecting the 'P' entry from the item class menu
Inspired by the itemcat patch by Stanislav Traykov.
Invalidates saves and bones.
Reported and diagnosed by entrez:
"The <mon> yanks <two-handed weapon> from your corpses!"
It became unwielded and that triggered a perm_invent update and
such updates reformat entire inventory, so if that contains a dozen
or more items it will use all the obuf[] static buffers as least
once. In this case, the bullwhip code had plural of "hand" in one
of those buffers and by the time it delivered the message which
used that, the value had been clobbered.
As the diagnosis mentioned, it can be tricky to reproduce since
either &obuf[0] or &obuf[PREFIX] might be used and if the value
being clobbered didn't overlap, the effect wasn't noticeable.
Instead of fixing the bullwhip message, this changes inventory
display so that it should no longer churn through all the buffers.
It also adds a fixes entry for #K3401, which was already fixed for
3.7 but I hadn't been able to reproduce it for 3.6.x (which I now
blame on the PREFIX trickiness).
Save files from before the 'disambiguate WHACK' patch were not
necessarily compatible with ones after it, leading to potential
restore problems.
Comments in objclass.h (from before the patch) suggested that
inappropriate assumptions were being made about field layout.
This deliberately introduces new incompatibility and increments
EDITLEVEL to caused earlier save and bones files to be thrown
away.
Fixes#587
