Fixes#198
Watching a monster try to switch from a cursed weapon to some other
weapon (of any bless/curse state) reported that the old weapon was
welded to the monster's hand and wouldn't switch to the new one.
But watching a monster try to wield a cursed weapon didn't say that
it was becoming welded at the time. Report correctly pointed out
that the weld-to-hand check wouldn't work unless the weapon was
already flagged as wielded, and the code in question was deferring
wielding so that the message wouldn't include "(weapon in hand)" in
the formatted object description. There was also another problem:
it was erroneously testing the monster's old weapon (if any, after
unwielding it), instead of the new one being wielded.
Also, Sunsword starting to emit light when first wielded by a monster
only reported that it was shining if hero could see the monster.
Give an alternate message if hero sees the location instead. (Just
the monster's/Sunsword's location rather than any newly lit spot
within Sunsword's radius.)
Throwing or kicking a lit lamp, lit candle, or lit potion of oil
wasn't giving off any light as it travelled to its destination.
Now it does, and dungeon features, objects, or monsters that are
temporarily seen as it moves from square to square till appear on
the map. In the monster case, they go away as soon as the light
moves beyond range, but when it finishes moving the "remembered,
unseen monster" glyph will be drawn at their location. I think that
part has some room for improvement, but mapping temporarily seen
terrain features is the primary impetus for this change.
Also, any message delivery while the "lit missile" travelled still
showed its light around the hero. Noticeable for lamps or stacks
of sufficient candles if hero has no other light source.
This cannibalizes the monst->mburied bit for temporarily seeing a
monster. It has been present but unused for ages. I needed to
replace a couple of vision macros to make sure they didn't examine
it any more so that overloading for transient lighting doesn't
introduce any vision oddities. For version $NEXT, monst->mtemplit
can be given its own bit. It is only set during bhit() execution
and cleared by the time that returns, so has no effect on save files.
While testing, I noticed that I could completely fill the Water level
with air elementals.
Hero can't fly or levitate or water walk into/onto water locations
on Water level without drowning/crawling out the water, and monsters
shouldn't have been able to but could, then they were hit by drowning
since minliquid used different criteria than movement. But goodpos(),
used for teleport destination and new monster creation among other
things, consided water locations acceptable on that level for
non-aquadic creatures with Fly/Lev/Wwalk ability.
It explains why so many dragons and other 'nasty' monsters have been
ending up on the vanquished monsters list when hero uses level
teleport to go directly there from level 1. They've either been
getting created in water and then they drown when it's their turn to
move or moving into it to approach the hero and drowning (not sure
whether that case is immediate or on next move). There's no message
since hero doesn't see it, and air elementals didn't drown since thy
don't breathe.
placebc was triggering an impossible sometimes on the plane of
water
It turned out to be because movebubbles issued an
unplacebc(), but a downstream function called
placebc(), so when movebubbles() issued its own
placebc() there was a problem.
The downstream function that beat movebubbles to the placebc()
turned out to be unstuck(). There could be others.
If a corpse with a revive timer included obj->oextra->omonst for
remembering the original monster (I think all corpses do these days)
and makemon() failed to create a new monster when the timer expired,
the copy of the original wasn't freed. makemon() will fail if there
is no room for the monster.
Noticed when testing the set_bknown patch earlier: something updated
the persistent inventory window while scroll processing was in the
midst of traversing invent and it showed the scroll I'd just read
change from known blessed to bless/curse state not known. The scroll
should really be removed from inventory because player is told that it
has disappeared, but unlike charging (which does do that so that it is
gone when selecting an item to charge), remove curse isn't auto-IDed
and the code to ask the player to call an unIDed item something only
kicks in when it's still in inventory. Preventing the scroll in use
from having its bknown flag cleared should be good enough; it won't
have disappeared yet but at least it won't be visibly changing.
Carried containers could have their contents-known state and/or
lock-known state changed without persistent inventory window being
updated to show the new information.
This also changes the behavior when player has hero zap self with
wand of locking or wizard lock spell. If it doesn't trigger a
holding trap then the effect will hit inventory, similar to how
opening/knock operates (releasing hero from holding trap or hiting
inventory when that doesn't happen).
Changing an inventory item's bknown flag wasn't followed by a call to
update_inventory() in many circumstances, so information which should
have appeared wasn't showing up until some other event triggered an
update.
Fixes#196
If you didn't die from turning into green slime but then died because
green slimes had been genocided, the message given assumed that you
had just seen "OK, you don't die" from answering No to "Really die?".
Its wording didn't make sense if the reason you didn't die was an
amulet of life-saving. Give a different message for that case.
Also, if you survive turning into slime (via either method) and either
green slimes are still around or you answer No to "Really die?" when
they've been genocided, give a message after "You survived that attempt
on your life" pointing out that you have done so in green slime form.
Useful since prior to 3.6.2 you would have reverted to original form--
despite the Slimed countdown saying you had turned into green slime.
Even though a goodpos failure in mnearto() would return 0 to
the caller and trigger proper overcrowding handling for mtmp,
the 'othermon' would be left with its mx,my set to 0,0 under
that circumstance and then trigger a mon_sanity_check()
failure and accompanying impossible() message a short while
afterwards.
This also includes the addition of some flags that proved useful
for troubleshooting the mystery sanity_check failure and helping
to understand some of the code paths the struct monst data had
been through. They are only used for inspection when issues are
reported or when debugging, they don't presently control the
code flow. Their setting and use is done in an overloaded way
that should not intrude on the existing use of mspare1 for
MIGR_LEFTOVERS. mon->mstate is just a pseudonym for mon->mspare1
and does not alter save file content.
The key binding overhaul broke '&' reporting for movement commands.
This is somewhat clumsy but seems to be working as intended.
(M-0 with 'number_pad' set to 2 (or 4) appears to be broken. It's
supposed to be a synonym for 'I' but brings full inventory ('i')
for me. I have to set 'altmeta' On and type ESC followed by 0, but
that sequence does work to get M-0.)
When testing Planes of Air and Water, I found it odd that trying to
move off the edge of a level uses a turn but provides no feedback.
If 'mention_walls' is On, report that you can't go any farther in
whichever direction you're trying to move. Moving diagonally is
only blocked in one of the two combined directions unless you're in
the very corner, so if you try to move southwest while in the middle
of the bottom row, for instance, it says you can't go farther south
rather than southwest.
Make the Plane of Water be water all the way to edge instead of having
stone on left, top, and right. The Plane of Air already has air all
the way to edge (including unused/unuseable column #0) but does so via
code rather than the level description file so Water does that now too.
The edges of the Plane of Air were cloudless (3 columns on the left,
2 rows on the top, and 2 columns on the right; don't recall about the
bottom) and that looked pretty strange. Those rows and columns are
beyond the range of bubble/cloud movement so just make some of those
spots randomly be sight-blocking cloud terrain instead of all open air.
It isn't integrated with the moving clouds but looks fairly good when
the hero moves along the edge of the level.
Using wizard mode to leave Water or Air and later return resulted in
no clouds on the Air level and bubbles as usual on the Water level.
I still don't understand why, but on return to those levels run the
bubble creation routine as if the old discarded bubbles or clouds were
being restored.
Unfreed memory noticed after interrupting the fuzzer and quitting.
query_objlist() has an early return--for touching a cockatrice
corpse--that was skipping release of sortloot info (an array with
one element per object from whichever object list was being used).
Some formatting that's been sitting around for a while got mixed in
and I decided not to take that back out.
Leaving the Plane of Water to return to a previously visited endgame
level didn't free the air bubbles unless/until you visit a new level.
Returning to that level creates a new set of air bubbles, losing track
of the previous set. Likewise with Plane of Air and its clouds. (Not
an issue with actual save and restore when on those levels, or when
just moving forward to not-yet-visited levels.)
Not applicable to normal play where it isn't possible to return to a
previously visited endgame level.
For 3.7, bubble save/restore ought to become part of savlev() instead
of being handled by savegamestate().
After going back and forth between prompts causing message lines
to be overwritten and to be skipped, this yoyo might have finally
run out of string. Fingers crossed....
If you died while Punished but with attached ball and chain temporarily
off the map (changing levels and when swallowed are the cases I looked
at; there may be others), the ball and chain objects would not appear
in bones (for the falling-down-stairs case; bones are never saved if
hero dies while swallowed) and they weren't being freed. Put them
back on the map so that they'll be included in bones and also freed as
part of normal map cleanup.
This caused a problem if the attached ball had state OBJ_FREE due to
being thrown rather than being temporarily off the map. 'thrownobj'
was being deallocated without first cancelling punishment, so uball
object was freed via thrownobj pointer but stale uball pointer still
referenced it. Unpunishing would introduce sequencing issues because
that would need to be after attribute disclosure. So instead of
deallocating thrown or kicked object, put it/them (can't actually have
both at the same time) back on the map. This has a side-effect of
saving thrown Mjollnir in bones if it kills hero when failing to be
caught upon return. (I thought that that had been fixed ages ago?)
Bones information for the current level was freed during save but not
at end of game. Have freedynamicdata() call savelev(,,FREE_SAVE) to
throw away current level instead of trying to duplicate the actions
that performs.
The #overview command can provide some feedback about levels loaded
from bones files; that data wasn't being released at end of game.
(There are two copies of that data, one set always in memory with
the overview data [final_resting_place field in the 'mapseen' data],
and another set with portions attached to each relevant level [via
level.bonesinfo]. Neither set was being properly freed; this only
addresses one of them, so far. The per-level data can probably be
eliminated--for post-3.6--since DUNGEON_OVERVIEW isn't a conditional
feature as it was when that was implemented.)
The first generated luckstone is marked as the prize in mines' end.
Make sure we generate the intended one first, before any other
(possibly randomly generated) luckstones.
if one of the random objects happened to be a luckstone then
it and the explicit one got marked as a prize.
Following this change, only one will be marked as the prize,
but a follow-up on the order of things in mines.des may be
warranted to ensure it is the explicitly placed luckstone.
Back in February, my e991dd1b0c added
ESC (when there's no input) as an early return for curses' getline,
but it neglected to clean up some allocated memory.
Fix a problem introduced by f218e3f15e
and/or a19e64e470. Sometimes the line
after a prompt would be empty and the next message get shown on the
line after that. a19e64e470 was intended to fix the opposite problem
so probably overshot the mark....
Sometimes curses tears down and recreates all its windows (when the
display is resized, for instance) and after doing that it repopulates
the message window with data saved for use by ^P. But it was showing
the oldest messages available rather than the most recent ones.
There is still room for improvement. That process combines short
messages but the refresh is based on the available number of lines;
combining messages can result in lines at the bottom of the message
window being left blank. This could be fixed by reverse-scrolling the
window and inserting more messages at the top, or by combining short
messages in history data instead of at refresh time. The second seems
easier but won't handle changing the message window's width sensibly,
and neither method handles wrapped, long lines well. A More>> prompt
(possibly more than one) is issued if the refresh shows too many lines
(either because long messages already took multiple lines or because
the window has become narrower and ones which used to fit now need to
be wrapped).
Air bubble movement on the Plane of Water manipulated <u.ux,u.uy>
directly when changing hero's coordinates, leaving steed with old
coordinates, resulting in dunking it when the old spot switched from
air to water. Switch to u_on_newpos() which moves the steed with
the hero and also handles clipping when the screen is too small to
show the whole map at once.
